You are on page 1of 1

ORDER / QUOTATION INFORMATION:

Customer contact: _______________________________________________________ Job No.: __________________________________________________________________


Company name & address: _________________________________________________ Phone: _____________________________ Fax: ______________________________
_______________________________________________________________________ Email: __________________________________________________________________
Model (i.e. PR, RPS): ______________________ END CONNECTIONS:
Series: □ 106 - full port □ 206 - reduced port □ ANSI FNPT □ ANSI 150 □ ANSI 300 □ BSPT
Valve size: _________________________ □ inches □ mm □ ANSI drilled to PN10 □ ANSI drilled to PN16
Quantity: _________________________ □ ANSI drilled to PN25 □ ANSI drilled to PN40
Fluid being handled: _______________________________________________________ other: ___________________________________________________________________
ValvesSensorsSystems

VALVE PATTERN: PILOT SYSTEM ORIENTATION:

Craan, Craanford,
GLOBE PATTERN ORIENTATION ANGLE PATTERN ORIENTATION STANDARD OPPOSITE

Gorey, Co. Wexford, Ireland


MeasurIT Technologies Ltd.
□ □ □ □ □ □ □ □
NOTE: Horizontal stem - full port available up to 8’’ only; NOTE: Horizontal stem - full port available up to 8’’ only;
reduced port available up to 10’’ only. reduced port available up to 10’’ only.

APPLICATION DETAILS: FLOW RATE: DIFFERENTIAL PRESSURE RANGE: FLUID TEMPERATURE:


□ USGPM or □ L/s Min.: __________________________ Inlet: _______________ Outlet: _______________ Min.: ___________________
□ PSI or □ bar Normal: __________________________ Inlet: _______________ Outlet: _______________ Normal: ___________________
other: ______________________________ Max.: __________________________ Inlet: _______________ Outlet: _______________ Max.: ____________________
ELECTRICAL (WHERE APPLICABLE): MAIN VALVE OPTIONS: PILOTS & ACCESSORIES:

www.measurIT.com
Solenoid voltage: ________________________________ □ reclaimed water Pilot spring range: ____________________

email: info@measurIT.com
Pilot range(s): __________________________________ □ external spring lift Required operating range: ______________
Energize to: □ open □ close main valve □ grooved ends Pilot utilized: _________________________
Number of limit switches: _________________________ □ internal drop check
Actuation positions: ______________________________ □ anti-cavitation trim □ model J0097A strainer
Contacts: □ SPDT or □ DPDT □ x107 position indicator □ model J0098A strainer
□ Standard power-failure mode is fail at last position or □ x129 limit switch indicator □ arion model J1521G strainer
□ Fail open on power failure or □ x136 analog position transmitter □ arion model J1521M strainer
□ Fail closed on power failure □ no yellow metal upgrade
Source of set point signal (4-20mA): _______________ □ delrin stem sleeve OTHER INFORMATION:
Source of set process variable signal: ______________ □ oxy nitride stem ____________________________________
□ Optional explosion proof housing OTHER:

Fax: +353 (0) 53 942 8963


____________________________________

Phone: +353 (0) 53 942 8962


□ Optional NEMA 4x control panel enlosure Controls flow □ in □ out of reservoir ____________________________________
measurIT technologies

□ Optional touch screen operator interface

You might also like