TAXINSINEN
AAJIYA JETRIB
METAL ROOFING SYSTEM
TRAPEZOIDAL PROFILEAAJIYA
AJIYA JET RIB INDUSTRIAL PROFILE METAL ROOFING
+ Roll - forming long length high tensile metal decking,
+ Manufactured from high tensile steel substrate protected with corrosion inhibitive treatment.
+ Roofing and walling profiles with material warranty up to 25 years*. “Warranty terms & conditions apply
* With effective cover width of 720mm and rib height of 23mm.
+ For minimum roof pitch of 3°
+ Innovative, durable and cost effective.
+ Widely used for commercial and industrial projects such as factories, condominium, cabin, hoarding, and etc,
SECTIONAL PROFILE
LY. IV ht
Dimensions Tolerence
Rib height 23mm Thickness for material: +0,03mm
Effective eover 20mm Effective Width +3mm
Minimum roof piteh Finishing Length: + Smm.
INSTALLATION MISITEKOD
It is strongly recommended that AJTYA
JET RIB are laid with the side laps
facing away from the direction of the
prevailing wind. Where possible, the
roof sheets should be fixed with the side
ann atils soemmmonl some omuloe oxcentne laps facing away from the mormal line
street we inant ‘iuwmumaron Neve 335 of sight
SIDE LAP fasteners are required at
mid. spans for purlin spacings over
1,000mm and fo girt spacings over
1,200mm for all side lap and flashing
rwawacrowus fastening, use no. 10 x 2Smm_ self
Chmnvzemn drilling Hexagon Head Screw with
pre-assembled neoprene bonded steel
washer.
END LAP AIIYA JET RIB is available
in continuous length limited only by the
maximum transportable length of 20m.
For longer length, end lap is necessary.
Minimum end lap should be 200mm and
for roof pitches below 8°, the lap should
be treated with a recommended sealant.
Hi Tensile Metal Roofing Sheets in pre-painted hot-dipped zine-coated steel OR pr
hot-dipped zinc-aluminium alloy-coated steel to be fixes with/without insulation, and come complete with necessary fittings andTECHNICAL SPECIFICATIONS
AVAILABLE THICKNESS
0.35 0.40 2.65 3.68 272 ASTM A446-E 550
0.42 0.48 3.18 4.42 315 ASTM A446-£ 550
0.48 0.55 3.61 5.01 200 ASTM A446-E 550
035 040 130 1700 1900 2400
oa 048 1700 2100 2200 2600
08 05 2700 2700 2600 2500
RECOMMENDED MAXIMUM ROOF LENGTH (M)
RAINFALL (mm/h)
150 50 60 80
200 39 50 60
250 30 40 48
300 26 30 40
The recommended minimum fall is 3°, However it must be temembered that the amount of water that must be
\gth of the roof. Therefore, to avoid possible back up of water in serve wind conditions
recommended roof length should be considered as maximum for a given roof pitch and rainfall
IEDXIING:
Vana onl sh
CREST FIXING OF AJIYA JET RIB
Crest fixing to st Crest fixing to timberNII ANSIPAND AR DICARPIUNG/BIEAS HING
RIDGE CAPPING TYPE 24
Ve
www.ajiya.com
Corporate Head Office & Facto
rac en ea
Jalan Genuang
Ceres
ecu
mes)
Ce
Derr aerated
Reese ee er ge)
Seksyen 32
A
ec corral
FLASHING TYPE 12a ee
Ree tetrad
Tas eee)
81400 Senai, Johor
cee Le
FLASHING TYPE 18b FLASHING TYPE 12b eee
; Dee etc
7 eer
"PE Se ea
ag ee
= coe ee)
ante eeRELET
FASCIA/BARGE CAPPING TYPE 18 FASCIA/BARGE CAPPING TYPE 12
Deanery
ND a eee
Peruri e ae
er
en ec
cere)
Pecos)
PO CULE eet
CORNER CAPPING TYPE 9E CORNER CAPPING TYPE 91 ere near tac
a So Ea
Coens
a+ .
cl ai cert 5
[eae e ete)
CC areas
Lot 1306, Kawasan Perindustrian
ered
VALLEY TRAY TYPE 24 VALLEY TRAY TYPE 18 Laas
dar r al came Sey
TY :
COMMITMENT
tip Recon cel kde 1s)
wv