Professional Documents
Culture Documents
ATMEL Microcontroller can programming with ISP(In-System Programming) which easy to developt your
applications without insert/remove microcontroller. This is an ISP module for ATMEL Microcontroller that support ISP
such AT89SXXXX, AVR families etc. Requires no power supply because it use power supply from target board. This
circuit need only 10 resistors, 1 IC, 1 Capacitor,1 R-Pack.PCB size 1.6 X 4.1 cm. and Plated-Through-Hole type.
Support ATMEL Microcontroller Devices
- AT89S51
- AT89S52
- AT89S53
- AT89S8252
- AT90S1200
- AT90S2313
- AT90S4433
- AT90S8515
- AT90S8535
- MEGA8
- TINY26
and other devices that suport In-System Programming
Fig 2. PCB Overlay show 6 resistor(Yellow) must solder at the buttom of PCB
How to assembly
After your PCB can avialible. First solder 6 resistors at the buttom of the PCB then follow by remain components at the
TOP side of PCB.The cable I used is the flat cable for both side of PCB.