Professional Documents
Culture Documents
Configuration of FE Ports On NEC NEO-c
Configuration of FE Ports On NEC NEO-c
2/23/2011
03. Click Maintenance Button in Maintenance window and then following window will appear.
04. Select on radio button and click Execute button to implement the command.
05. Click Close button when finished.
06. Open the Equipment Configuration Monitor.
07. Select Configuration Equipment Setup and then following window will appear.
08. Click Setup button in Equipment Setup window and then following window will appear.
10. Click on User Interface Combo Box and select PDH E1 with LAN from drop down list.
11. Then Click Next button and following window will appear.
12. Do not change anything in this window and Click Next button. Then following window will appear.
13. Click on LAN Port Usage combo box and select P1-2 Separated(Main) from drop down list. Then Click
on Capacity combo box in Radio Mapping panel and select 10[Mbps] from drop down list.
14. Click Next button and then following window will appear.
15. Click Finish button to close this wizard and click the Execute button in the Equipment Setup window to
save the modified settings.
18. Click LAN Port1 Usage button and then following window will appear.
: Used
: AUTONEG(Auto-MID/MIDX)
Flow Control
: Off
Collision Report
: Not Report