Professional Documents
Culture Documents
Tutorial: Andreana Papantoniou Carolina Libardi Erina Filipovska
Tutorial: Andreana Papantoniou Carolina Libardi Erina Filipovska
CAM
ANDREANA PAPANTONIOU
CAROLINA LIBARDI
ERINA FILIPOVSKA
_TUTORIAL [2010]
Navas
La Sagrera
[the area]
Camp delArpa
Barrio 5
Step 1:
Model the area using Rhinoceros. Load RhinoCam2 by tiping the command on
the command bar.
Step 2:
Choose the machine type in the Setup tab > Machine Type > 3 Axis.
Step 3:
For the post processor choose the option Precix.
Step 4:
The stock can be set or by typing the measures manually or by picking a modelled stock volume as a reference, which happened for our case.
Step 6:
Horizontal roughing, cut levels.
Step 7:
Horizontal roughing, cut parameters.
Step 8:
Parallel finishing is the final milling process, with refined resolution. The tool
used for this case was a thin 3 mm ball point.
Step 9:
Parallel finishing, clearance.
Step 10:
Parallel finishing, cut parameters.
Step 11:
To visualize a simulation of the milling process, first select the horizontal
roughing option and then press Play.
Step 12:
If the simulation of the roughing process works, select the parallel finishing
option and simulate. The file is ready to export.
The Model:
After the model was printed in a high density foam, it was inserted in
the model of the entire city of Barcelona. The scale of this model is
1/2000, and it will be used as a study model. A final interactive model
will be built, and this will help in the design decision.
Barrio 5
[the model]
The Milling
-IHR
ON
MAC
UOINOTNAPAP ANAERDNA
IDRABIL ANILORAC
AKSVOPILIF ANIRE
]0102[ LAIROTUT_