Professional Documents
Culture Documents
Fast, Effective
Blowout Protection
MODEL DRH - DUAL RAM HYDRAULIC BOP
Pipe Centering Guide
Guide Rib
Ram Rubber
Pipe Ram Block
Door
Cylinder
Locking Shaft
Lip-Type
Piston Seal
Hinge
Ram Holder
Cylinder
Head
Hydraulic Port
Manifold
Piston
Ram Shaft
DRH Features
A positive seal every time. Control Flows DRH (Dual Ram
Hydraulic) or SRH (Single Ram Hydraulic) models let you shut
in a well in seconds from a control panel located at the drillers
station or any other place you choose. Theres no waiting for
rig hands to get to the cellar and manually close the rams.
The trouble-free, efficient design of these 5,000-psi-workingpressure BOPs has been field-proven in many years of rugged
service.
Double protection. Install pipe rams in one compartment of a
DRH and blind rams in the other and you can shut in the well
whether theres pipe in the hole or not. Each set of rams
operates independently of the other.
Automatic pipe string alignment. As rams close, guides on
the ram blocks automatically center the pipe string in the
wellbore, even if the string is hanging off center.
Positive pressure control. One-piece ram rubbers seal across
the wellbore and against the top of the ram cavity. Retracting
screws allow ram blocks to move slightly in their holders to
ensure positive alignment as sealing contact occurs.
Extrusion plates channel rubber flow toward sealing surfaces as rams meet. Each rubber is secured to its ram block
by two retaining screws, which fit into trunnion nuts extending
through the extrusion plates molded into the rubber. This
keeps the rubber in proper sealing position, even under
extreme pressure.
Well pressure assists sealing. When rams are closed,
pressure in the wellbore pushes them upward and inward,
squeezing the ram rubbers more tightly against the sealing
surfaces.
Any standard 1,500-psi accumulator will operate your
Control Flow BOP. Rams can also be opened and closed with
a hand pump, if necessary.
Rams can be locked in their closed position by manually
turning each locking shaft clockwise until it shoulders against
the cylinder head.
Rig crew can close rams manually with the locking shafts if
hydraulic pressure should fail. Closed rams can be opened
only by hydraulic pressure.
Locking shafts cant corrode or freeze up because the
exposed portions of their threads are constantly immersed in
hydraulic fluid.
Each ram and its operating mechanism is completely selfcontained. Ram, ram shaft, piston and cylinder are all
mounted on a hinged door, which can be swung open after the
cap screws are removed.
Model DRH
Qty.
Part No.
Description
Working Pressure
5,000 psi
Item
No.
Body
Door, Right Hand
Door, Left Hand
Pipe Plug
5
6
O-Ring, Door
Cap Screw, Door
7
8
9
Cylinder
Cylinder Head
Cylinder Head, Right
Hand
Cylinder Head, Left
Hand
O-Ring, Cylinder and
Cylinder Head
Cap Screw, Cylinder and
Cylinder Head
Stud, Cylinder and
Cylinder Head
Nut, Cylinder and
Cylinder Head
Manifold, Cylinder
O-Ring, Cylinder
Manifold
O-Ring, Cylinder
Manifold Port
Ram Shaft
Packing, Ram Shaft
Packing Adaptor, Ram
Shaft
O-Ring, Packing Adaptor
Outer
O-Ring, Packing Adaptor
Inner
Retainer, Packing
Adaptor
Ring, Packing Back-Up
Retainer, Packing BackUp Ring
Scraper Ring, Ram
Shaft
Piston Assembly
Body
Rubber
Retainer, Rubber
Cap Screw, Rubber
Retainter
Lock Washer, Retainer
Cap Screw
O-Ring
Lock Nut, Piston
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Part No.
Working Pressure
5,000 psi
7 !/16"
Bore
1
2
3
4
Qty.
1
2
2
24
32
4
32
40
4
4
2
133002
133003
065001
030030
133012
133004
133005
133006
030141
11"
134807
134808
065001
030008
134806
134005
134006
030007
13 %/8"
134607
134608
065001
134014
134606
134005
134006
030007
Item
No.
Set Screw
36
37
Locking Shaft
Thrust Bushing, Locking
Shaft
Retainer, Thrust Bushing
38
39
52
53
54
55
56
57
58
59
60
61
62
63
64
Bushing
Ram Assembly
Wrench, Door
Wrench, Cylinder and
Cylinder Head
Handwheel
U-Joint
Stem Assembly
40
41
42
43
24
215283
134418
134418
44
45
46
47
24
020101
020103
020103
48
4
16
133007
030056
49
24
030058
030058
50
51
4
32
4
133008
132415
193601
030003
115025
193601
030003
192011
030077
030006
030006
030000
030005
030005
040952
4
4
040395
4
4
8
8
32
132413
132420
132422
132421
132423
32
4
4
030071
132414
115026
041017
-
041017
015026
041017
-
192006
192007
115021
115020
010657
192006
192007
115021
115020
010657
025032
025032
030000
192103
030000
192103
65
66
67
7 !/16"
Bore
35
11"
13 %/8"
4
8
4
4
010015
141218
130014
010000
193703
134008
010000
193703
134008
040146
040001
040001
030011
030065
12
4
030210
030211
030210
030211
040384
040002
040002
4
4
8
16
132411
050080
-
134009
134810
050096
010726
134009
134010
050096
010727
16
010691
010622
2
4
2
132427
-
16
4
40
4
8
4
8
24
32
24
32
8
4
1
1
030054
030056
030056
133010
134811
134001
030061
030064
030065
132424
132424
132424
066326
066326
066326
065009
050267
011017
011026
010422
020011
020014
020012
065145
065145
065145
See Ram Parts List
050363
050828
050459
050561
050370
050370
4
4
4
131107
202011
202402
134812-1
134609
134812-2
-
115050
202007
202402
115050
202007
202402
C.S.O.
1.315"
1.660"
1.900"
2 !/16"
2 #/8"
2 &/8"
3 !/2"
4"
4 !/2"
Ram Block
Ram
SubAssemblya Assemblyb
135783
135787
135791
135795
136073
135799
135803
135807
135811
135815
135940
135941
135942
135943
142643
135944
135945
135946
135947
135948
Part Number
Part Number
Part Number
Pipe
O.D.
Ram Block
Ram
Block
Ram
Rubber
135842
135788
135788
135788
136075
135863
135863
135808
135840
135840
135857
135789
135793
135797
136076
135858
135859
135860
135861
135862
Includes ram holder (135847), ram block subassembly, 2 ram block retracting screws (135848)
and centering plug (010706).
Pipe
Ram
SubO.D. Assemblya Assemblyb
C.S.O.
1.315"
1.660"
1.900"
2 #/8"
2 &/8"
3 !/2"
4"
4 !/2"
5"
5 !/2"
6 &/8"
7"
7 %/8"
8 %/8"
215269
215270
215271
215272
215273
215274
215244
215112
215245
215113
215246
215247
215248
215249
215226
215227
215228
215229
215230
215211
215212
215213
215114
215214
215115
215215
215216
215217
215218
215219
Ram
Block
Ram
Rubber
Pipe
O.D.
215231
215232
215233
215234
215235
215236
215237
215116
215238
215117
215239
215240
215241
215242
215243
215275
215276
215277
215278
215279
215280
215281
215118
215220
215119
215221
215222
215223
215224
215225
C.S.O.
1.315"
1.660"
1.900"
2 !/16"
2 #/8"
2 &/8"
3 !/2"
4"
4 !/2"
5"
5 !/2"
6 %/8"
7"
7 %/8"
8 %/8"
9 %/8"
10 #/4"
Includes ram holder (135875), ram block subassembly and 2 ram block retracting screws
(135575).
Ram Block
SubRam
Assemblya Assemblyb
215122
215123
215124
215125
215126
215127
215128
215129
215130
215131
215132
215133
215134
215135
215136
215137
215138
215139
215140
215141
215142
215143
215144
215145
215146
215147
215148
215149
215150
215151
215152
215153
215154
215155
215156
215157
Ram
Block
Ram
Rubber
215158
215159
215160
215161
215162
215163
215164
215165
215166
215167
215168
215169
215170
215171
215172
215173
215174
215175
215176
215177
215178
215179
215180
215181
215182
215183
215190
215191
215192
215193
215194
215195
215196
215197
215198
215199
Includes ram holder (135551), ram block subassembly and 2 ram block retracting screws
(135575).
Specifications
Maximum
Service
Vertical
Pressure
Bore Size
Rating
(inches)
(psi)
71/16
11
135/8
5,000
5,000
5,000
Dimensions (inches)
A
Height
Test
Pressure
(psi)
Maximum
Ram Size
(inches)
10,000
10,000
10,000
4 1/2
8 5/8
10 3/4
Studded
End
Vertical ConnecBore Size
tions
71/16
11
135/8
263/4
33
36
Center to
Front
Flanged
End
Connections
Width
Length
301/2
501/2
495/8
211/2
283/4
335/8
58
1
89 /4
923/4
95/16
123/4
143/4
121/8
16
21
32
41
187/8
34
46
54
E
A
B
D
C
6
HYDRAULIC
Dimensions & Weights
Weight
Overall Height, Less Studs
Single
Double
Single
Double
Overall Length
Overall Width, Less Handwheel
Opening Through Preventer
Working Pressure
Test Pressure
Handwheel Diameter
Ring Joint Gasket API Number
1,300 lbs.
2,300 lbs
13 !/8"
22 !/4"
63"
21 #/4"
7 !/16"
3,000 psi
6,000 psi
14"
R-45
MECHANICAL
Dimensions & Weights
Weight
Overall Height, Less Studs
Overall Length
Overall Width, Less Handwheel
Opening Through Preventer
Working Pressure
Test Pressure
Handwheel Diameter
Ring Joint Gasket API Number
Single
Double
Single
Double
1,272 lbs.
2,335 lbs
13 !/8"
22 !/4"
63"
21 #/4"
7 !/16"
3,000 psi
6,000 psi
48"
R-45
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
8
Description
Body
1 !/8" x 5 !/2" T.E. Stud B-7
1 !/8" Hex Nut, Gr. 2H
1" Hex Nut, Gr. 2H
1" x 4 !/4" T.E. Stud Gr. B-7
Pillow Block
!/2" x 2" Hex Head Cap Screw
Bearing NTA-6074
Bearing Race TRC-6074
Snap Ring N-500-262
!/4" Grease Fitting
Snap Ring N-5100-375
Chain
#/4" x 1 !/2" Socket Head Cap Screw
Snap Ring N-5100-125
Lifting Plate
Handwheel, 36"
Handwheel Bar
Universal Joint
O-Ring, 2-339
O-Ring, 2-442
Wiper, Type D-2250
Qty.
1
24
24
36
24
4
8
8
16
4
8
4
4
24
4
2
2
2
2
4
4
4
Part No.
011010
020003-62
020001-62
0064
0066
010609
0069
0070
0072
0073
0074
0075-A
0076
0077
0082
0084
0087
0089
0182
0188
0253
Item
24
25
26
27
28
29
30
31
32
33
34
36
37
38
39
40
41
42
43
44
Description
Sprocket for Bearing Housing
Sprocket for Drive Shaft
Grease Plate
Ram Shaft, Left Hand
Ram Shaft, Right Hand
Thread Protector
Stem Bearing Housing/ Right Hand
Stem Bearing Housing/ Left Hand
Bearing Housing
Packing Gland
Packing Assembly
Drive Shaft
Sprocket Protector
Ram Guide Pin
Alignment Plug
End Cover
Pressure Plate
Ram Tool
Barrier Ring
O-Ring 2-226
Qty.
Part No.
4
4
4
2
2
4
2
2
4
4
4
2
4
4
4
4
2
1
4
4
3102
3103
3104
3105
3106
3107
3108
3109
3110
3111
3114
3115
3116
3117
3118
3119
3122
3134
3137
0211
Maximum operating
pressure (psi)
Ratio
Volume of fluid
(U.S. gallons)
Piston Stroke (inches)
Ram position can be positively determined visually. Slots are provided in both the cylinder
head and the M.O.R. protective cover.
The bi-directional piston seal eliminates the
possibility of improper installation.
TO OPEN
1,500
TO CLOSE
1,500
.59
4.2:1
.72
4.125
4.125
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Hydraulic fluid passages are ported through the body, eliminating the need for external piping.
Description
Body
1 !/8" x 5 !/4" T.E. Stud Gr. B-7
1 !/8" Hex Nut, Gr. 2H
1" Hex Nut, Gr. 2H
1" x 4 !/4" T.E. Stud Gr. B-7
O-Ring 2-226
!/4" NPT Pipe Plug
!/4" NPT Weep Plug
#/4" x 9 #/4" lg. T.E. Stud A193 B-7
!/2" x 3" lg. Socket Head Cap Screw
Lifting Plate
#/4" Nut, Gr. 2H
Handwheel 14"
Universal Joint
!/4" x !/4" S.H. Set Screw/S.S.
#/8" x #/4" Grade 8 Bolt
O-Ring, 2-228
O-Ring, 2-339
O-Ring, 2-017
O-Ring, 2-161
O-Ring, 2-116
O-Ring, 2-328
Qty.
Part No.
1
24
24
36
24
8
12
4
24
4
2
24
4
4
4
12
12
4
4
8
8
4
011010
020003-62
020001-62
0064
0211
0078
0079
0080
0081
0082
0083
0085
0089
0095
0096
0181
0182
0183
0184
0185
0186
Item
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
Description
O-Ring, 2-210
O-Ring, 2-442
Wiper, Type D-2250
Crown Seal, CP-350
Packing Gland
Packing Assembly
Ram Guide Pin
Alignment Plug
End Cover
Pressure Plate
Piston
Cylinder
Balance Stem
Protector, M.O.R.
Locking Shaft
Ram Shaft
Manifold Tube
Manifold Block
Bonnett
Manifold Protector
Ram Tool
Brass Spacer Ring
Qty.
Part No.
8
4
4
4
4
4
4
4
4
2
4
4
4
4
4
4
4
2
4
2
1
4
0187
0188
0253
0254
3111
3114
3117
3118
3119
3122
3123
3124
3125
3126
3127
3128
3129
3130
3131
3132
3134
3136
9
The Type EH ram allows for quick and easy packer replacement. No special tools are required
PACKER
PIN
PLATE
PACKER
Shaffer
Type A
Type B
Type E
LWS & LWP hydraulic BOPs
Type 45 mechanical BOP
Type 50 rotating preventer
Complete array of ring seals and seal kits for
all Shaffer spherical preventers
Cameron
LEFT HAND
Pipe O.D.
Centers
(Inches)
Assembly
Number
Block Part
Number
Assembly
Number
Block Part
Number
1.315
1.660
1.900
2 !/16
2 #/8
2 &/8
2 @%/32
2 @%/32
2 @%/32
2 @%/32
3 #%/64
3 #%/64
3206
3207
3208
3209
3210
3211
3071
3072
3073
3074
3075
3076
3200
3201
3202
3203
3204
3205
3281
3282
3083
3084
3085
3086
10
INNER PACKER
3060
3061
3062
3063
3064
3065
3060
3061
3062
3063
3064
3065
Pipe O.D
Block
Inner Packer
C.S.O.
1.315
1.660
1.900
2 !/16
2 #/16
2 #/8
2 #/4
2 &/8
3 !/2
4
4 !/2
5
5 !/2
3045
3046
3047
3048
3049
3050
3051
3052
3053
3054
3077
3078
3079
4080
3000
3001
3002
3003
3004
3005
3006
3007
3008
3009
3066
3067
3068
3069
31