MSI LIFTING LUG & PAD EYE
DESIGN GUIDELINES
Dated: 28" Feb 2002Contents
1. General
Design Consideration for Lifting Point
3. Pad Eye Design
Appendic A
Example: Pad Eye Detail based on APEA, “ Guideline for Lifting
Equipment”.
Appendix B
Example: Shackle Crosby Bow and Dee TypeMSI LIFTING LUG / PAD EYES DESIGN GUIDELINES
1. General
‘All Permanently attached Liting points on all new equipment constmctedafterI* March 2002 for
[SI should be designed to recognize Prinsipal Natioral Stndarc: or Cassification Guidelines
Example
DNV Offshore Fieight ContinersDesion and Certification
Austalian Petroleum Production & Explration Associaton Limited, “Guidelines forLifting
Equipment’
‘AS 4.00 Stel Sructures
‘AISC Manaal ofSteel Construction (ASD), 9* Edition, 1959,
[AISC Load and Resistince Factor Design Specification fr Strctral Stel Buildings, 1999,
1BS5950-Part1: 1990 Structal Steel
Eqrocode# BS ENV 1993 Design Br Steel Smoctures
AWSDI1 Smuctural Welding Code Stee! for Oil Field Service
ramones
‘The desim of the surrounding suche to which lifting points ar alized should allow
‘saramissionof the load fom te fing point tothe surounding acti
‘Adequate clesnnces should be provided between the pad eye and the risring,Lifing point: