You are on page 1of 12

Multimeter

Name : Bagus Anggoro Mukti


NIM : 2014 0120210
Teknik Elektro

The Mission Covenant Church Holm Glad College

What do meters measure?


A meter is a measuring instrumen. An
ammeter measures current, a voltmeter
measures the potential difference (voltage)
between two points, and ohmmeter measures
resistance.

A multimeter combines these


functions, and possibly some
additional ones as well, into a single
instrument

How Use of
Multimeter?

The Mission Covenant Church Holm Glad College

Outlook of Multimeter

Pointer and Scale

single pointer with different scale for different measurements

Selection

Switch

select to measure
voltage (ac or dc),
current or resistance.
The Mission Covenant Church Holm Glad College

Reading
from
Multimeter
As the Selection
Switch is at
DC25mA, the
multimeter is used
as a ammeter with
fsd 25mA.
The 250A scale is
used.
Reading = 17.5mA
The Mission Covenant Church Holm Glad College

Using as an Ohmmeter
With

the input
terminals shorted,
set zero by turning
the 0 Adjust
Knob.
Remember to set
zero again if the
ohmmeter range is
changed.
The Mission Covenant Church Holm Glad College

Reading from
Multimeter
As

the Selection
Switch is at x10, the
reading has to be
multiplied by 10.
The reading is 90, so
the resistance is 900
.

The Mission Covenant Church Holm Glad College

Measuring AC Voltage
If

AC voltage is
measured, remember
to use the output
terminal instead of the
positive terminal.
The negative
terminal is still used.

The Mission Covenant Church Holm Glad College

Digital Multimeter
Same

as analogue multimeter but


it has the advantage of having a
large internal resistance.
If the reading is larger than the
range, the reading cannot be
shown.
The COM terminal is always
used. The other terminal can be
10A, AmA, V depending
on the measurement.

The Mission Covenant Church Holm Glad College

Digital Ohmmeter
In

the figure shown, the resistance of the


resistor is 0.824k.

There

is no need
to multiplied 2k
for digital
ohmmeter as it is
the range, but not
the conversion
factor.
The Mission Covenant Church Holm Glad College

Measuring AC/DC
Make

sure that the


switch is switched to
the correct side for DC
or AC measurement.
DC

The Mission Covenant Church Holm Glad College

AC

THANK YOU

You might also like