Professional Documents
Culture Documents
Training Report: Piee Institutes
Training Report: Piee Institutes
LUDHIANA , PUNJAB
SOFTWARE TRAINING
TRAINING REPORT
PIEE INSTITUTES
KHANNA
ON
AUTOCAD /SOLIDWORKS
SUBMITTED IN PARTIAL FULFILLMENT OF THE DEGREE
OF
BACHELOR OF TECHNOLOGY
IN
MECHANICAL ENGINEERING
ER.Lovedeep garg
Submitted By:
AutoCAD
AutoCAD is a commercial software application for 2D
and 3D computer-aided design (CAD) and drafting
available since 1982 as a desktop application and since
2010 as a mobile, web- and cloud-based app marketed
as AutoCAD 360.
SOLIDWORKS
SolidWorks (stylized as SOLIDWORKS), is a solid
modeling computer-aided design (CAD) and computeraided engineering (CAE) computer program that runs
on Microsoft Windows. SolidWorks is published by
Dassault Systmes.
DRAWINGS
First, draw a perpendicular bisector will be horizontal at
its midpoint and perpendicular'll draw another
perpendicular bisector.
The midpoint centerline, draw a power circle diameter
of 30 CIRCLE command that radius - Radius 15
Command:
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter]: 15 [radius circle
no. 3]
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <7.5000>: 8
[radius circle no. 1 and 2]
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <8.0000>: 15
[radius circle no. 4]
Command:
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <15.0000>: 15
[radius circle no. 5]
Command:
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <15.0000>: 25
[radius circle no. 6]
Now using OSNAP mode (including TANGENT) will
merge at a tangent circles outside of the drawings.
Carefully study the figure below, turn off the other
connecting point Osnap that you do not confuse.You
need to click on the button LINE and then target the
outer circle of 4/6, 5/6 and when the character appears
to Tangent click a mouse.
Previous action to make all four external connecting
lines. After that, you need to have this drawing.
STEP 1
Command: _rectang
Specify first corner point or [chamfer / Elevation / Fillet /
Thickness / Width]: [Click on the starting point]
Specify other corner point or [Area / Dimensions /
Rotation]: D
Specify length for rectangles <60.0000>: 70 [length of
the rectangle horizontal line]
Command: _fillet
Current settings: Mode = TRIM, Radius = 20.0000
[formerly set radius]
Select first object or [Undo / Polyline / Radius / Trim /
Multiple]: R [activate an option for Radius - Radius]
Specify fillet radius <20.0000>: 6 [enter dimensions
Radius]
Select first object or [Undo / Polyline / Radius / Trim /
Multiple]: [Click on the first line for selection]
Select second object or shift-select to apply corner:
[Click on the second line for selection]
STEP 6
Set the starting point of the inner rectangle
STEP 7
Draw the inner rectangle command Recetangle
Command: _rectang
Specify first corner point or [chamfer / Elevation / Fillet /
Thickness / Width]: [click on a point of departure]
Specify other corner point or [Area / Dimensions /
Rotation]: D
Specify length for rectangles <20.0000>: 40
Specify width for rectangles <40.0000>: 20
Specify other corner point or [Area / Dimensions /
Rotation]: [Quadrant IV]
Command:
STEP 8
Rounding corners of the inner rectangle using FILLET
command. When using the FILLET command to form
such a rectangle, do not confuse what you will after the
first click (selection line) the entire rectangle will be
selected, just press Enter and click on the vertical line
that makes the angle and the Fillet command is
executed.
Command: _fillet
Current settings: Mode = TRIM, Radius = 16.0000
[previously inscribed radius]
Select first object or [Undo / Polyline / Radius / Trim /
Multiple]: R [select Radius]
Specify fillet radius <8.0000>: 8 [enter a value for the
radius-radius]
Select first object or [Undo / Polyline / Radius / Trim /
Multiple]: [Click on the first line of the angle, in this
case will select the entire rectangle]
Select second object or shift-select to apply corner:
[click on the second line which forms an angle with the
preceding]Command: ESC
DRAWINGS
1. Click New (File>New) , click Part , OK.
2. Click Option (Tools>Option) , select Document
Properties tab. Select Units , under Unit System select
IPS (inch, pound, second) OK.
2. Extrudesketch to 0.34in.
BIBLIOGRAPHY
WIKIPEDIA
GOOGLE