You are on page 1of 1
————————————— BE CExTe) mas ed oa Micvessave £ fodar ET. Q.P.Code: 6015 @ Hours) [ Total Marks : 80 No.2 i sory. + (1) Question No.1 is compul , a % sve any three questions from the remaining, G) Assume suitable data if necessary i jc tees. & 1. (a) Design circulator using mag? tie é ‘Travelling wave tube as an amplifier. ugmawi (Basia a operation of Zhe Directional couple with sa @ Explain Doppler shift and its role in pulsed and CW radar. aS Z, is 100+} 10002 and the characteristiggimpedence 10 ae Zrotihe line and stub is 500. Te ist paced at OAD Ay fom ne iad. The spacing between the two stubs is 34/8. Determines he length of the short circuited stubs when the match is achieved. (b) Explain instrument landing system for aircraft navigation 10 3. (a) Detive'the wave equation for a TE wave and-obtaig all the field components 10 ina circular waveguide. x (b) What isthe importance of beam coupling cogflstient ? Derive the equation of 10 velocity modulation in klystron. (@ ~ Explain the significane of RWH model.ind two valley model in Gunn diode. 10 (by With a suitable diagram, explain thylworking on conical scan tracking radar. 10 Explain the vaflous factors thaieed to be considered in determining the optimum squint angle. td s 5. (@) Draw and explain withgblock diegram of MTI radar system, What are its 10 limitations, w (b) Discuss the poweréquency, current frequency and power gein frequency 10 timitations with r@ffence to a microwave transistor. 6 (a) Desiga twoGimped element L section matching network at 500 MHz to 10 transforrs@, = 200 - j1000 to @ 100 0 transmission line. Use'Smith Chart (b) Write-aShort note one backward wave oscilator. (©) A cat operating at 1.5 GHz uses a peak pulse power of 2.5 MW and heve a ‘eee of 100 nmi for objects whose radar cross section is Itn?. Ifthe minimum <

You might also like