Professional Documents
Culture Documents
Tutorial Install Map For MapSource
Tutorial Install Map For MapSource
Lets Start do this, I assume you download all the pack from
http://www.cintaabadi.com/it-stuff-article/50-install-map-imgmapsource-garmin.html
1. Unrar all the file and put in your local folder E.g.: C:\maptools\
2. Put your gmapsupp.img from your garmin xt in the same folder C:\maptools\
3. run dos command and move to C:\maptools\
4. and type gmt -S gmapsupp.img
**Note if you got error when uses that line command use that line command you need extra command use
this line command type gmt -S -f productid,1 -m "New map name" gmapsupp.img I can not tell you.
What map which need this command line , just try this command line if you can not use the plain
command.
5. Then after that you will get some file from the extract process
8. Please remember dont use img file from gmt until you done with cgpsmapper, so the img that want we
use is after process from cgpsmapper. after that we copy the file
9.
- 12345678.img
- mapset00.mp
- mapset00.tdb
- mapset00.mdx
in some folder in your local computer, in this exam I use the same folder for Mapsource in my tutorial
c:\garmin\XXXX, then run MapsetToolkit ,and select install a existing map set.
10. We almost done, after that run Mapsource. Then you will prompted that Mapsource detect lock map
11. Click unlock map than input 25 character Unlock code from your map provider like in garmin xt.
12. Then the last step , click menu View and click the Show Gps map detail and make sure the zoom status
at the right bottom corner is showing GPS Map Detail as show .
13. then its finish, you can use Transfer to communicate with your GPS.
Library :
-
http://cgpsmapper.com/
http://cypherman1.googlepages.com/home
http://www.anpo.republika.pl
This tutorial is for education only, any illegal use of this tutorial is not responsible of the writer. Please
use this tutorial wisely. This tutorial purpose to help user to analyze and their gps data on local
computer.