Professional Documents
Culture Documents
P N M T: PNMT (Java Version) Installation Manual (Windowsvista)
P N M T: PNMT (Java Version) Installation Manual (Windowsvista)
P
N
M
T
ASOLINK
ETWORK
ANAGEMENT
ERMINAL
NEC Corporation
Copyright 2010
ROI-S06907
Table of Contents
1.
Installation Sequence........................................................................................................................... 1
2.
3.
4.
5.
6.
PNMT Setup...................................................................................................................................... 25
7.
8.
9.
10.
PNMT Launching.............................................................................................................................. 41
-i-
ROI-S06907
1.
Installation Sequence
Only Administrator group privilege level users are authorized to configure the following settings,
(1) Dial-up Connection
Step 1: Modem Setting
PASOLINK NEO
Standard 19200bps Modem Setting
Connections.
Connections.
-1-
ROI-S06907
-2-
ROI-S06907
2.
-3-
ROI-S06907
(3) Click the Phone and Modem Options icon in the Control Panel window to start configuring
the modem.
(4) If Location Information window will appear, enter your country and area code and then click
[OK].
-4-
ROI-S06907
(6) Select the Modem tab. Click [Add] to continue with adding the new modem for the PNMT.
-5-
ROI-S06907
(7) Check Dont detect my modem ... and click [Next] to continue.
(8) Select Standard Modem Types from the list of Manufacturers and Standard 19200bps
Modem from the Models. Click [Next] to continue.
-6-
ROI-S06907
(9) Select Selected ports and COM#, then click [Next] to continue.
-7-
ROI-S06907
(11) Verify that Standard 19200 bps Modem and COM1 are displayed. Click [OK].
-8-
ROI-S06907
3.
-9-
ROI-S06907
(4) Insert the USB driver CD-ROM in the computers disk drive and set Search for driver
software in this location and click [Next].
- 10 -
ROI-S06907
- 11 -
ROI-S06907
NOTE
There is a possibility that the USB connection is dropped
during a long-duration operation depending on the device type
of computer. In the case of a connection failure, please
reestablish the dial-up connection.
- 12 -
ROI-S06907
4.
Dial-up Setting
(1)
Click Start | Control Panel and the Network and Sharing Center icon to start
configuring the Dialup setting.
(2)
The Network and Sharing Center window appears. Click Setup a connection or
network in the Tasks area.
- 13 -
ROI-S06907
(3)
(4)
- 14 -
ROI-S06907
- 15 -
ROI-S06907
(5)
In the New Connection Wizard window, input connection name and Dial-up phone
number field.
Check Dont connect now... and click [Next].
In case of connecting with RS232C-Type [PNMT(RS232C)]
- 16 -
ROI-S06907
(6)
(7)
- 17 -
ROI-S06907
(8)
The Network and Sharing Center window appears. Click [Manage network
connections] in the Connect Dial-up Connection window
(9)
Select Connection and Right Click , Appear context menu and select Connections
properties.
- 18 -
ROI-S06907
(10)
USB setting
RS232C setting
(11)
RS232C setting
USB setting
- 19 -
ROI-S06907
(12)
Retain the default setting on the Options tab and click the PPP Setting.
RS232C setting
(13)
USB setting
In the PPP Setting window, uncheck all the boxes. Click [OK] to go back to the
previous window. And click the Security tab.
- 20 -
ROI-S06907
(14)
Retain the default setting on the Security tab and click the Networking tab.
RS232C setting
(15)
USB setting
On the Networking tab, uncheck File and Printer ... and Client for Microsoft...
and Internet Protocol Version 6(TCP/IPv6)
RS232C setting
USB setting
- 21 -
ROI-S06907
(16)
(17)
Verify that both Obtain an IP address automatically and Obtain DNS server address
automatically are selected.
In the Advanced TCP/IP Settings window, uncheck Use IP header compression for
the PPP link. Click [OK].
- 22 -
ROI-S06907
5.
(2)
- 23 -
ROI-S06907
(3)
(4)
Turn off SNMP feature and WMI SNMP Provider check box, and click [OK].
- 24 -
ROI-S06907
6.
PNMT Setup
NOTE
If PNMT software has already been installed, please uninstall it
before you install a new version.
(1) Insert the PNMT Installation CDROM. Open the CDROM folder and double-click install.exe.
- 25 -
ROI-S06907
(4) Specify the directory in which the PNMT is to be installed. Click [Next].
Restore Default Folder:
Click this button to revert to default path
Choose:
Click this button to select another directory
- 26 -
ROI-S06907
NOTE
The default path is C:\PNMSj. It is not possible to include
blank spaces as in Program Files. (C denotes the directory
where the currently running OS is installed)
(5) Specify the License Key file if one is available. Click [Next].
Restore Default File:
Click this button to revert to default file
Choose:
Click this button to choose the license key file
NOTE
If no license key file is available, operation in trial mode is
possible.
IMPORTANT: IMMEDIATE IMPORT OF LICENSE
You may use the PNMT on a trial basis for 30 days. After that
the PNMT can ONLY be used IF the license has been imported
(activated). To obtain the license please contact NEC.
- 27 -
ROI-S06907
- 28 -
ROI-S06907
- 29 -
ROI-S06907
7.
Firewall Setup
(1)
(2)
(3)
- 30 -
ROI-S06907
(4)
(5)
- 31 -
ROI-S06907
NOTE
Configuring the firewall as above, a security warning icon
will appear on the task tray. After terminating PNMTj, please
check mark on PNMTj(USB) and PNMTj(RS232C).You will
need to re-configure the firewall each time you startup
PNMTj.
- 32 -
ROI-S06907
8.
- 33 -
ROI-S06907
(3) In the Windows Firewall with Advanced Security.Window appears Click Inbound
Rules and New Rules.. on Actions.
- 34 -
ROI-S06907
(5) Select This program path and Click [Browse]. Select the pnmt on PNMTj Install
PATH\bin Click [Next].
- 35 -
ROI-S06907
- 36 -
ROI-S06907
(10) Input Name filed and Description field and Click [Finish].
- 37 -
ROI-S06907
9.
(2) Select the Network and Sharing Center from the Control Panel window.
- 38 -
ROI-S06907
(3) Select the Manage Network Connections from the Network and Sharing Center
window. Right click the Local Area Connection and select the Properties from the
context menu.
(4) The following Local Area Connection Properties window will appear as default.
Select the Internet Protocol Version 4 (TCP/IPv4), then click on the Properties
button.
- 39 -
ROI-S06907
(5) The following Internet Protocol Version 4 (TCP/IPv4) Properties window will appear.
Select the Use the following IP Address instead of the Obtain an IP address
automatically. Set the IP address, Subnet mask and Default gateway as follows:
Item
Setting
IP Address
172.17.254.254
Subnet mask
255.255.255.252
Default gateway
172.17.254.253
- 40 -
ROI-S06907
- 41 -
ROI-S06907
(3) Enter User name and Password, and Select the Connection Entry.
After installation of the PNMT, the initial password will be:User name:
admin
Password:
Connection:
- 42 -
ROI-S06907
- 43 -
ROI-S06907
NOTE
If another application is using the SNMP Port, application
initialization will not be possible; the application will shut
down, and the following message will appear.
- 44 -