Professional Documents
Culture Documents
Bank Management System V B
Bank Management System V B
PROJECT REPORT
ON
BANK
MANAGEMENT
SYSTEM
Submitted By:--
Acknowledgement
I am thankful to Mr. .. (Final student of MCA from SMU) who
helps me to develop this project. My hard work and sincerity help me to
overcome the problem that came on the way. Finally I am very grateful to
Mr. .. who gives knowledge about the data flow of the project.
It is my pleasant duty to thank all the staff member of the computer center
who never hesitated me from time during the project.
Finally, I gratefully acknowledge the support, encouragement & patience
of my family, And as always, nothing in my life would be possible
without God, Thank You!
..
CERTIFICATE
This is to certify that the project titled ___________
________________ _______________ ___________ is a
bonafied work carried out by Mr./ Ms. _____________
_________________
in
partial
execution
of
the
____________
____________
from
Internal guide:
H.O.D.
Seal
INDEX
S.No.
Report
Page No.
1.
Acknowledgement
2.
Certificate
Introduction
4.
Objective
5.
Project Category
6.
Tool/ Environment
15
7.
16
8.
Program Structure
17
9.
Coding
21
10.
Documentation
53
11.
Future Application
54
12.
References
55
INTRODUCTION
4
During the past several decades personnel function has been transformed from
a relatively obscure record keeping staff to central and top level management
function. There are many factors that have influenced this transformation like
technological advances, professionalism, and general recognition of human beings as
most important resources.
A computer based management system is designed to handle all the primary
information required to calculate monthly statements of customer account which
include monthly statement of any month. Separate database is maintained to handle
all the details required for the correct statement calculation and generation.
This project intends to introduce more user friendliness in the various
activities such as record updation, maintenance, and searching. The searching of
record has been made quite simple as all the details of the customer can be obtained
by simply keying in the identification or account number of that customer. Similarly,
record maintenance and updation can also be accomplished by using the account
number with all the details being automatically generated. These details are also being
promptly automatically updated in the master file thus keeping the record absolutely
up-to-date.
The entire information has maintained in the database or Files and whoever
wants to retrieve cant retrieve, only authorization user can retrieve the necessary
information which can be easily be accessible from the file.
Bank.
This project includes the entire upgraded feature required for the
computerization banking system. This system is very easy to use, so that any user can
use without getting pre-knowledge about this. Its very much user friendly and meet
almost all daily working process requirements. This system is completely GUI based
and can be use by mouse and as well as keyboard. This system is melded in such a
way that has got all features to upgrade without making much change in existing
components.
The entire information has maintained in the database or Files and whoever
wants to retrieve cant retrieve, only authorization user can retrieve the necessary
information which can be easily be accessible from the file.
PROJECT CATEGORY
Inconsistent as it is, try to mimic Visual Basic's own error handling scheme as
much as possible.
When you call a Visual Basic routine that can fail, what is the standard way
that the routine signals the failure to you? It probably won't be via a return value. If it
were, procedures, for one, would have trouble signaling failure. Most (but not all)
routines raise an error (an exception) when they want to signal failure. (This applies to
procedures, functions, and methods.) For example, Create Object raises an exception
if it cannot create an objectfor whatever reason; Open does the same if it cannot
open a file for you. (Not all routines raise such exceptions. For example, the Choose
function returns Null [thus, it requires a Variant to hold its return value just in case it
ever fails] if you index into it incorrectly.) In other words, if a routine works correctly,
this fact is signaled to the caller by the absence of any error condition.
Routines such as Open work like this primarily so that they can be used more
flexibly. For example, by not handling the error internally, perhaps by prompting the
user in some way, the caller is free to handle errors in the most suitable way.
Indexed-sequential files
Components of OLE DB
Data Consumers
Data consumers are applications that use the data exposed by data providers.
ADO is the programmatic interface for using OLE DB data. Examples of consumers
include high-level data access models such as ADO, business applications written in
development tools such as Visual Basic, C++, or Java, and development tools
themselves. Any application that uses ADO is an OLE DB data consumer.
Service Components
Service components are elements that process and transport data and extend
the functionality of data providers. For example, a cursor engine is a service
component that can consume data from a sequential, forward-only data source to
produce scrollable data. Service components are designed to integrate efficiently to
help OLE DB component vendors develop high-quality OLE DB components.
Data Providers
Data providers are applications, such as Microsoft SQL Server or Exchange.
This includes operating system components, such as a file system, indexed-sequential
files, spreadsheets, document stores, and mail files that have data that other
applications may need to access. These data providers expose OLE DB interfaces that
service components or data consumers can access directly. There is also an OLE DB
provider for ODBC. This provider makes any ODBC data available to OLE DB data
consumers. However, OLE DB is not dependent on ODBC.
has
defined
an
open,
extensible
standard
for
software
interoperability. The Component Object Model (COM) makes it possible for software
components that you create to work with other software components, including
software you buy off-the-shelf.
COM allows software components, derived from any combination of preexisting components you have developed and components from different software
vendors, to connect to and communicate with each other.
Because COM enables interoperability among applications written in different
languages, a word processor application written by one vendor can connect to a
spreadsheet object written by another vendor. The word processor application could
then be used to import data from the spreadsheet object. Additionally, the spreadsheet
object could receive data through a COM object residing on a mainframe. The word
processor, spreadsheet, and mainframe database do not have to know anything about
each other's implementation. The word processor only needs to know how to connect
to the spreadsheet; the spreadsheet only needs to know how to expose its services for
other software components to connect.
10
further extended with any programming tool that supports COM technology, such as
Visual Basic.
A client application or component object does not care what language a COM
object was written in, only that it can communicate with the object. This allows
application and component objects to communicate with each other regardless of the
language or development tool in which they were created.
Reusability
Once you create a COM component, other developers can use it. This enables
easy access to your component's features in other applications without
requiring developers to write extensive code.
Reduced complexity
You can create a COM component to hide programming complexity from
other programmers. Other programmers need only know what information to
provide to your component, and what information to retrieve.
Easier updating
Components make it easier for you to revise and update your applications. For
example, you can create a COM component that encapsulates business rules.
If the business rules change, you update just the component, not all the
applications that use the component.
11
When you use COM components in a Visual Basic project, you do not have to
understand all of the mechanics involved in making these components work together.
It is more important to know how to use the component that adds the functionality
you need to your application. You can find detailed information about COM at
http://www.microsoft.com/com/default.asp.
Class Modules
Class modules (.cls files) are the foundation of object-oriented programming
in Visual Basic. They are analogous to a blueprint for a house. Just as a house is built
from a blueprint, new objects are created from class modules. These new objects
include your own customized properties and methods.
A class module is similar to a standard code module (.bas file) because both
contain functionality that can be used by other modules within the application. The
difference is that a class module provides functionality in the form of an object:
Data in a standard module has program scope, which means that it exists for
the life of your program.
Class module data exists for each object that is created from the class. Each
object's data exists only for the lifetime of the object; it is created when the
object is created, and destroyed when the object is destroyed.
can be thought of as a container for multiple classes. For example, you could create a
"vehicles" code component that contains multiple classes; these classes can be used to
create objects such as cars, trucks, and vans. A client application uses a code
component by creating an object from one of the classes the component provides, and
invoking the object's properties, methods, and events.
12
ActiveX Controls
ActiveX controls (formerly known as OLE controls) are standard userinterface elements that allow you to rapidly assemble reusable forms and
dialog boxes.
Active Documents
Active documents are COM components that must be hosted and activated
within a document container. Active document technology is an extension to
OLE documents. It enables generic shell applications, such as Microsoft
Internet Explorer, to host different types of documents.
13
Access
online
documentation
and
Microsoft's
Support
Online
14
This chapter will focus primarily on the ADO object models for Jet in Access
and the ADODB and ADOX libraries. Extensive programming examples will show
you how to accomplish typical database tasks. Other chapters in this book will build
on the information in this chapter and will cover additional ADO topics, such as
database replication, remote database access, and multi-user security.
15
Hardware Specifications
Hardware is a set of physical components, which performs the functions of
applying appropriate, predefined instructions. In other words, one can say that
electronic and mechanical parts of computer constitute hardware.
This package is designed on a powerful programming language Visual Basic.
It is a powerful Graphical User Interface. The backend is ACCESS, which is used to
maintain database. It can run on almost all the popular microcomputers. The
following are the minimum hardware specifications to run this package: -
Hardware requirement:
Personal Computer: It minimum contains P-III
processor with 128 MB RAM.
Software Requirements:
The software is a set of procedures of coded information or a
program which when fed into the computer hardware, enables the
computer to perform the various tasks. Software is like a current inside
the wire, which cannot be seen but its effect can be felt.
1. Operating System:- Windows NT / 2000 / XP
2. Application Software:- Application software uses front end visual basic and
database access etc.
Editor:- Visual basic.
16
1. Open Account: It consists of new bank account form. A consist new enquiry
information who come to the bank for enquiry about new account (saving, current).
Then he or she fill up the new account form according to their account number
generated automatically and also generate cheui no automatically.
2. Close or Edit Account:It consists or provides editing and closing account form and also such
particular account information.
3. Monthly Statement: It consists of two sided form monthly statement of bank employee and
monthly statement of saving and current account employee.
17
18
Program Structure
The detail structure and description of table are as follows:
Table Structure and Description:
1. Account: Account
Fieldname
Actno
Name
Address
Phone
Act type
City
Date
Field Type
Number
Text
Text
Number
Text
Text
Date/time
Field size
Constraint
Long int
50
50
Double
20
50
Medium
Primary
date
Chequebook
Yes/no
This table is used to maintain open account details. Where employee come
from new account. Which keep all information about employee. Here act no define
primary key.
19
Fieldname
Type code
Type name
Int rate
Account type
Field type
Text
Text
Number
Field size
50
Constraint
50
Default
This table is used for which type of account opens a employee, type of account
saving or current account and also give a account type code.
iii. Balance table: -
Field
Balance table
Field type
Field size
name
Actno
Balance
Number
Number
Constraint
Default
Long
int
This table the balance of all type of account, saving or current account.
20
Field name
Cheque table
Field type
Field size
Actno
Number
Default
No _from
Number
Default
No _to
Number
Default
Constraint
This table content all account detail and if you open new account and chose
cheque option so give cheque no of your account.
v. Pass table: -
Field name
Pass table
Field type
Field size
Name
Text
50
Pswd
Text
50
Constraint
Field name
Actno
Tamp table
Field type
Number
Field size
Long int
Temp type
Text
50
Ckequeno
Number
Long int
Amount
Number
Long int
Date
Date/time
Constraint
This table show the tamp let of all account information and transaction of per day of bank.
21
Field type
Number
Field size
Long int
Tran type
Text
50
Amount
Number
Long int
act Type
Text
50
Chequeno
Number
Long int
Date
Date/time
Default
Time
Date/time
Default
Constraint
Primary
This table contains all per day transaction of bank and also summarized all
money transaction updating and editing.
22
Data structure
Diagram (Design) :- Designing if system demonstrates the exact flow of I-PO cycle of the system. I-P-O cycle is Input-Process-Output cycle of the system, where
we need to define what are input we need to take to produced the output, which is our
requirements. According to this input and output we design the processing phase.
There are lot of category define to design the system few of them are begin discus
here.
23
New
customer
Fills enquiry
Form
Enquiry
New
Account
Request for
New Account
Send
New
Account
Request.
24
Control
Management
Proce
ss
Account Details
CODING
25
_____________________________________________________________________
26
Login Form:--
27
___________________________________________________________________________________
_
Form1.Show
Form1.AcButton.Enabled = False
Form1.BnkButton.Enabled = False
Form1.TrButton.Enabled = False
Form1.AcClButton.Enabled = False
ElseIf Combo1.Text = "Manager" Then
Unload Me
Permission = 1 'For Account Permission Clos account
Form1.Show
End If
End Sub
30
Main Form:--
___________________________________________________________________________________
_
31
Coding :--___________________________________________________________________________________
___
32
33
___________________________________________________________________________________
___
34
Dim a As Integer
Private Sub Check1_Click()
End Sub
Private Sub Command1_Click()
Dim sstr, s As String
Dim rst As New ADODB.Recordset
rst.Open "Select max(actno) from Account", cn, adOpenKeyset, adLockOptimistic,
cmdtext
a = rst(0) + 1
If CheckField = True Then
s = Text1.Text
If Check1.Value = 1 Then
sstr = "insert into account "
sstr = sstr + "values(" & a & ",'" & Text1.Text & "', '" & Text3.Text & "', "
sstr = sstr + " " & Text2.Text & " ,'" & Combo1.Text & "' ,'" & Text6.Text &
"','" & Date & "',YES)"
cn.Execute sstr
MsgBox "Account Created " & "Account Number = " & a, vbInformation, a
Call UpdateCheque
MsgBox "Ur Cheque No is from " & MaxNo & " To " & MaxNo + 10,
vbInformation
StatusBar1.Panels(2).Text = "Cheque No " & MaxNo & " - " & MaxNo +
10
ElseIf Check1.Value = 0 Then
sstr = "insert into account "
sstr = sstr + "values(" & a & ",'" & Text1.Text & "', '" & Text3.Text & "', "
sstr = sstr + " " & Text2.Text & " ,'" & Combo1.Text & "' ,'" & Text6.Text &
"','" & Date & "',NO)"
cn.Execute sstr
MsgBox "Account Created " & "Account Number = " & a, vbInformation, a
35
Else
CheckField = True
End If
ElseIf Check1.Value = 0 Then
If Not Val(Text5.Text) >= 500 Then
MsgBox "Minimum Balance Should be 500"
CheckField = False
Else
CheckField = True
End If
Else
CheckField = True
End If
End Function
Private Sub Command2_Click()
Call ClearField
End Sub
Sub ClearField()
Text1.Text = ""
Text2.Text = ""
Text3.Text = ""
Text5.Text = ""
Me.Text6.Text = ""
Check1.Value = 0
End Sub
Private Sub Command3_Click()
Unload Me
'Form1.Show 1
End Sub
Private Sub Command4_Click()
Unload Me
37
End Sub
Private Sub UpdateCheque()
Dim rst As New ADODB.Recordset
rst.CursorLocation = adUseClient
rst.Open "select max(NoTo) from cheque", cn, adOpenKeyset, adLockOptimistic
If rst.RecordCount > 0 Then
If Not rst.EOF Then
MaxNo = Val(rst.Fields(0)) + 1
Else
MaxNo = 1234
End If
Else
MaxNo = 1234
End If
cn.Execute "insert into cheque(Actno,NoForm,NoTo)values(" & a & "," & MaxNo
& "," & MaxNo + 10 & ")"
rst.Close
End Sub
Private Sub Form_Load()
Text4.Caption = Date$
Label6.Caption = Time()
If rs.State = 1 Then rs.Close
rs.Open "select * from AccountType", cn, adOpenKeyset, adLockOptimistic,
cmdtext
rs.MoveFirst
While Not rs.EOF
Combo1.AddItem rs(1)
rs.MoveNext
Wend
Combo1.ListIndex = 0
End Sub
Private Sub Text2_KeyPress(KeyAscii As Integer)
38
39
___________________________________________________________________________________
__
42
43
MaxNo = rst(0)
MaxNo = MaxNo + 1
stmt = "insert into Cheque values ("
stmt = stmt + "" & Combo1.Text & ", " & MaxNo & "," & MaxNo + 10 & ")"
cn.Execute stmt
' This is to update in the account master table
stmt = "update account set ChequeBook = YES where "
stmt = stmt + "actno = " & Combo1.Text & ""
cn.Execute stmt
MsgBox "Cheque book created form " & MaxNo & " To " & MaxNo + 10
StatusBar1.Panels(1).Text = "Cheque book created form " &
MaxNo & " To " & MaxNo + 10
rs.Requery
'This is to move record to the first position
If rs.RecordCount > 0 Then
rs.MoveFirst
End If
If rs.BOF Then
MsgBox "You Are Onto The First Record"
Else
Call FillRecord(rs)
End If
End If
Else
Dim ch As String
ch = MsgBox("Cheque Already Issued if cheque last then click yes", vbYesNo)
If ch = vbYes Then
stmt = "delete from Cheque where actno = " & Combo1.Text & ""
cn.Execute stmt
If rst.State = 1 Then rst.Close
rst.Open "select max(NoTo) from Cheque", cn, adOpenKeyset,
adLockOptimistic, cmdtext
If rst.RecordCount > 0 Then
45
rs.CursorType = adOpenKeyset
rs.LockType = adLockOptimistic
rs.Open "select * from Account order by actno"
If Not rs.BOF Then rs.MoveFirst
While Not rs.EOF
Combo1.AddItem rs!actno
rs.MoveNext
Wend
If Not rs.BOF Then rs.MoveFirst
If rs.RecordCount > 0 Then
Call FillRecord(rs)
End If
End Sub
'************************************************
'Fill Record in the Form Controls
Private Sub FillRecord(rs As ADODB.Recordset)
Dim i As Integer
Dim a
Dim rsB As New ADODB.Recordset
If rs.RecordCount > 0 Then
For i = 0 To Combo1.ListCount - 1
If Combo1.List(i) = Trim(rs!actno) Then
Combo1.ListIndex = i
Exit For
End If
Next
End If
a = rs!actno
Text1.Text = rs!Nam
Text2.Text = rs!phone
Text3.Text = rs!actype
Text4.Text = rs!address
47
Text6.Text = rs!Date
'Fill in the check box
If rs!ChequeBook = True Then
Check1.Value = 1
Else
Check1.Value = 0
End If
'To get the balance from Balance Table
If rsB.State = 1 Then rsB.Close
rsB.Open "select * from BalanceTable where actno = " & a & "", cn,
adOpenKeyset, adLockOptimistic, cmdtext
Text5.Text = rsB!balance
End Sub
Private Sub Frame1_DragDrop(Source As Control, X As Single, Y As Single)
End Sub
48
49
_____________________________________________________________________
__
Component :Amount Transaction form
Form Name : frmtran
Code :-
50
Else
Text2.Enabled = False
End If
End Sub
'This procedure is to check that the cheque number
'Which is entered is correct or not
Private Function CheqTest() As Boolean
If Not Combo2.Text = "Deposite" Then
Dim rst As New ADODB.Recordset
rst.ActiveConnection = cn
If rst.State = 1 Then rst.Close
rst.CursorLocation = adUseClient
rst.CursorType = adOpenKeyset
rst.LockType = adLockOptimistic
rst.Open "select * from account where actno = " & Combo1.Text & ""
If rst!ChequeBook = True Then
If Not Text2.Text = "" Then
If rst.State = 1 Then rst.Close
rst.Open "select * from Cheque where actno = " & Combo1.Text & " "
If rst.RecordCount > 0 Then
If Text2.Text >= rst(1) And Text2.Text <= rst(2) Then
MsgBox "SS"
CheqTest = True
Else
MsgBox "Please enter the valid cheque no", vbInformation
CheqTest = False
Exit Function
End If
End If
Else
MsgBox "U will have to select Cheque and enter cheque number ",
vbInformation
51
CheqTest = False
Exit Function
End If
Else
CheqTest = True
End If
Else
CheqTest = True
End If
End Function
'This is the submit button command button that is
'To submit the transaction in the transaction table
'After checking the appropriate field
Private Sub Command1_Click()
Dim sstr As String
If Not Text1.Text = "" Or Val(Text1.Text) < 100 Then
If Text2.Text = "" Then
Text2.Text = 0
End If
sstr = "Insert into Transaction1 values("
sstr = sstr + " " & Combo1.Text & ",'" & Combo2.Text & "',"
sstr = sstr + "" & Text1.Text & ",'" & Combo3.Text & "'"
sstr = sstr + "," & Text2.Text & ",'" & Date & "','" & Time & "')"
If CheqTest = True Then
Call UpdateMoney
If a = True Then
cn.Execute sstr
StatusBar1.Panels(1).Text = "Money " & Combo2.Text & " Success"
MsgBox "Money " & Combo2.Text & " Success"
End If
a = False
End If
52
Call ClearField
Else
MsgBox "please Enter Lease 100 Transaction Amount ", vbInformation
End If
End Sub
'This is to Update the balance in database
Private Sub UpdateMoney()
Dim rst As New ADODB.Recordset
Dim stmt As String
Dim d As Long
If rst.State = 1 Then rst.Close
rst.Open "select * from BalanceTable where actno = " & Combo1.Text & "", cn,
adOpenKeyset, adLockOptimistic, cmdtext
If Combo2.Text = "Deposite" Then
d = rst!balance + Val(Text1.Text)
stmt = "update BalanceTable set balance = " & d & ""
stmt = stmt + " where actno = " & Combo1.Text & ""
cn.Execute stmt
a = True
ElseIf Combo2.Text = "Withdraw" Then
If rst!balance > Val(Text1.Text) Then
d = rst!balance - Val(Text1.Text)
stmt = "update BalanceTable set balance = " & d & ""
stmt = stmt + " where actno = " & Combo1.Text & ""
cn.Execute stmt
a = True
Else
MsgBox "U dont have money to Transact U have only " & rst!balance
a = False
End If
End If
End Sub
53
rs.MoveNext
Wend
rs.Close
Combo2.AddItem "Withdraw"
Combo2.AddItem "Deposite"
Combo2.ListIndex = 0
Combo1.ListIndex = 0
Combo3.Clear
Combo3.AddItem "Cheque"
Combo3.AddItem "Withdrawl"
'rs.Close
End Sub
Private Sub Timer1_Timer()
Label3.Caption = Time
End Sub
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~
55
___________________________________________________________________________________
___
56
Unload Me
Form1.Show 1
End Sub
Private Sub Command3_Click()
SummaryRept.Refresh
DataEnvironment1.rsCommand2.Requery
SummaryRept.Show
End Sub
Private Sub DataGrid1_Click()
End Sub
Private Sub Form_Load()
Adodc1.Refresh
End Sub
57
___________________________________________________________________________________
__
'rs.Open "select Balance from BalanceTable where actno = " & txtActno & "", cn,
adOpenKeyset, adLockOptimistic, cmdtext
'Text1 = rs(0)
'rs.Close
End Sub
Private Sub DataReport_Error(ByVal JobType As
MSDataReportLib.AsyncTypeConstants, ByVal Cookie As Long, ByVal ErrObj As
MSDataReportLib.RptError, ShowError As Boolean)
On Error Resume Next
End Sub
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~
59
___________________________________________________________________________________
__
60
Adodc1.Refresh
DataGrid1.Refresh
End Sub
Private Sub Command1_Click()
Unload Me
'Form1.Show 1
End Sub
Private Sub Command2_Click()
Unload Me
End Sub
Private Sub Command3_Click()
If DataEnvironment1.rsCommand1.State = 1 Then
DataEnvironment1.rsCommand1.Close
DataEnvironment1.rsCommand1.Open "select * from Temptable", cn,
adOpenKeyset, adLockOptimistic, cmdtext
DataEnvironment1.rsCommand1.Requery
StatmentRept.Refresh
StatmentRept.Show
End Sub
Private Sub DataGrid1_Click()
End Sub
Private Sub Form_Load()
rs.ActiveConnection = cn
If rs.State = 1 Then rs.Close
rs.CursorLocation = adUseClient
rs.CursorType = adOpenKeyset
rs.LockType = adLockOptimistic
rs.Open "select actno from account order by actno"
If rs.RecordCount > 0 Then
rs.MoveFirst
61
Wend
End If
Else
StatusBar1.Panels(0).Text = "Not Any Transaction Made"
End If
Call FillBalance
End Sub
Private Sub FillBalance()
Dim rsq As New ADODB.Recordset
If rsq.State = 1 Then rsq.Close
rsq.Open "select Balance from BalanceTable where actno = " & Combo1.Text & "
", cn, adOpenKeyset, adLockOptimistic, cmdtext
Text1.Text = rsq(0)
End Sub
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
63
_____________________________________________________________________
_
Component : Statement report form
Form Name : FrmStetement
Code:-
64
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~
_____________________________________________________________________
___
65
Module Code:_____________________________________________________________________
___
66
StatmentRept.Show
End Sub
68
End Sub
69
Documentation
This website project www.indiaonline.com is developed by
.. This is a application software like any application working on bank,
hospital project, etc. where staff can store database in computer and easily analyse the
data and get information.
To install this application software in your system do the following:1). Save exefiles and database files and folder under "banksys" folder in ..C: drive..
2). Double click the application software.
3). For exit click on exit..
User Manual
Account Statement: User can take the account statement by displaying all the
customers records.
List of all account holders: User can view the consolidated list of all the account
holders.
Transactions: User can deposit or withdraw amount in customers account by
selecting transaction form of the project.
Opening new account: User can open new customer account by adding new record
from customer form.
70
Conclusion
This project is designed to meet the requirements of a Banking System. It has been
developed in Visual Basic, keeping in mind the specifications of the system.
For designing the system we have used simple data flow diagrams.
Overall the project teaches us the essential skills like:
Using system analysis and design techniques like data flow diagram in designing
the system.
71
72