Professional Documents
Culture Documents
Bulldozer Bulldozer: Special Vehicle Series: 03
Bulldozer Bulldozer: Special Vehicle Series: 03
Bulldozer
Pattern
h t t p : / / w w w. c a n o n . c o m / c - p a r k / e n /
* This model was designed for Papercraft and may differ from the original in some respects.
1/43 scale
A bulldozer is a construction vehicle that can use its front blade to level ground or its rear
ripper to scrape earth and sand and to break up rocks. Categorized as a large
bulldozer, the D155AX-6 is used in projects such as civil engineering works and quarrying sites. While a traditional bulldozer blade has a gently curved surface, the
SIGMADOZER developed for this model has a profile that resembles the Greek letter
sigma when viewed from above. Since it excavates from the central area of the blade,
the D155AX-6 is more efficient than other bulldozers.
Editor:
Blade capacity :
9.4 m3
Overall length :
8,225 mm
2,700 mm
Overall height :
3,395 mm
* If you prefer that the rear sides of the paper parts not be white, print
the two optional reverse-side printing sheets on thin paper such as
standard printer paper and adhere these to the reverse sides of sheets
No. 8 to No. 10 using spray adhesive, then build the model as
described in the instructions.
Bulldozer
Pattern
Bulldozer
Pattern
Pattern
Bulldozer
Keisuke Saka
http://www.canon.com/c-park/en/
CAUTION
Bulldozer
Pattern
Bulldozer
Pattern
Bulldozer
Pattern
Bulldozer
Pattern
Bulldozer
Pattern
Bulldozer
Pattern
Bulldozer