Professional Documents
Culture Documents
3-1 Mech External Lab Supply Ques Paper
3-1 Mech External Lab Supply Ques Paper
METROLOGY LAB
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Measure the length, height and diameter by vernier calipers for a given specimen
Measure the length, height and diameter by micrometers for a given specimen
Measure the bore size by using dial bore indicator.
Perform the machine tool alignment test on the lathe.
Perform the machine tool alignment test on drilling machine.
Perform the machine tool alignment test on milling machine.
Find the Angle and taper values for the given specimen using bevel protractor.
Find the Angle and taper values for the given specimen using Sine bars.
Find the Angle and taper values for the given specimen using with rollers and balls.
Explain the use of spirit level in finding the straightness of a bed and flatness of a surface.
Thread inspection with two wire/ three wire method & tool makers microscope.
Measure the Surface roughness with roughness measuring instrument.
INSTRUMENTATION LAB
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1.
2.
3.
4.
5.
Perform the Step turning for the given specimen on lathe machine
Perform the taper turning for the given specimen on lathe machine
Perform Thread cutting for the given specimen on -lathe machine.
Perform knurling for the given specimen on -lathe machine
Perform Drilling and tapping operation on the specimen to get the hole of 20 mm dia thickness
6. Cylindrical surface grinding