WELDING GREEK INSTITUTE
EAAHNIKO INZTITOYTO ZYFKOAAHZEON
Welder Approval Test
Cert —Nrz W9606/GRIO05
ertificate
DESIGNATION: EN ISO 9606-1:2013 135 PFW FMI S¢15 PD mi
Welding Manufacturer Inspecting Authority: WELDING GREEK INSTITUTE
Procedure Specification: KOSMIDIS/001
Reference No. (if applicable):
Welder’s Name: KOSMIDIS CHARALAMPOS
Identification: WR O1
‘Method of Identification: Identity Card
Date and place of birth: ATHENS
( required):
‘Employer: KOSMIDIS CHAR. IOANNIS
Code / Applied Standard: ISO 9606-1
Job knowledge: Not tested
Test Piece Range of qualification
‘Welding Process(es): 135 135/138
Transfer Mode ‘SHORT CRCUT ‘SHORT CIRCUIT AND OTHER
"TRANSFER MODE
Product Type(plate or Pips) 7 P PLATE) PIPLATE)
‘Type of weld Fw Aw
Parent material group(s) a2 :
Filler material group(s) FM Fa, FM.
3 material (designation) ‘S{EN 440; G46 4 M G3 SI, AWS AS.LBERTOS-6) SM
Shiek
ing Gases ‘En 439 M21, 18% COD = =
‘Auxiliaries - :
‘Type of current ans polarity Deny
‘Material thickness (mm) 15,0 =
| Pipe outside diameter (mm) [= z
Welding position PO PA, PBPC, PD, PE
Weld details z 5
‘Multi-ayer/single layer inl mist
Addie formation i awaTabIe on aah ast ac7or wen prosourespeiTeaion No,
‘Type of est Performed |, Not | Name and Signature :
accepted
Visual x =
Radiography - - Inspection Authority:
Ultrasonic - x
Magnetic particle x
Penetrate testing x
Macroscopic exam, x = Date of issue
Fracture test - X | Location :
Bent test - X | Validity of approval 15.02.2019
Impact - x
Hardness x -
Prolongetion for Approval by Inspection Authority Prolongetion for Approval by Employer
Date | Signature Position or Title Date | Signature Position or Title
WELDING GREEK INSTITUTE ~ Tel: +30 210 3636 966, Fax 430 210 36.30917, wwwavgigr, email: infoaaweigr