You are on page 1of 1

Project 2 - Brief

Residential building, near the sea, in Cape Town.


Part A (1st Floor - Timber & Steel )
Design all steel and timber beams (including Link Bridge can ignore stair) and columns
(submit all relevant Hand calcs for analysis, with Prokon design checks);
Design a Flush end plate connection;
Design Steel Column C1& baseplate connection;
Submit all relevant Hand calcs for analysis ( with Prokon design checks);
Provide all relevant preliminary and construction drawings (plans; sections; flush end plate
and baseplate connection details, with relevant notes)
Part B (1st Floor - Precast concrete & Steel )
Design steel beams (supporting precast concrete slab;
Design a Flush end plate connection;
Design Steel Column C8 & baseplate connection;
Submit all relevant Hand calcs for analysis ( with Prokon design checks);
Provide all relevant preliminary and construction drawings (plans; sections; flush end plate
and baseplate connection details, with relevant notes)
Part C

Part D

(1st Floor- Timber & Steel)


Design all steel and timber beams ;
Design a Flush end plate connection;
Design Steel Column C6 & baseplate connection;
Submit all relevant Hand calcs for analysis ( with Prokon design checks);
Provide all relevant preliminary and construction drawings (plans; sections; flush end plate
and baseplate connection details, with relevant notes);
(Observation Deck over Garages)
Design timber and steel beams Design a Flush end plate connection;
Design Steel Column C11 & baseplate connection;
Submit all relevant Hand calcs for analysis ( with Prokon design checks);
Provide all relevant preliminary and construction drawings (plans; sections; connection
details, with relevant notes);

GENERAL (for all parts of Project)


Ignore wind load;
Assume Precast slab mass = 2.96kPa (on plan);
Assume brick wall mass = 19kN/m3;
Assume column length = 3.1m long (from U/S 1st floor deck to Top of Base);
All steel Grade S355JR (hot dipped galvanised);
All timber SAP;
All T & G planks are 96 x 22mm thick (already PAR);
Live load on main 1st floor and bridge (dwelling house) = 1.5kPa;
Live load on balconies and entertainment deck (accessible to residential occupancy) = 4 kPa;
Make reasonable assumptions (with references, where information not given)

You might also like