KOLEJ KEMAHIRAN TINGGI MARA.
‘SRI GADING
DIPLOMA TECHNOLOGY IN ADVANCED CONSTRUCTION SYSTEM
Course ‘| MATHEMATICS 2
Code DUM 2162
Credit Value [2 Pi
Lecture 1
Tutorial 2
Practical [0
suT 82
7 Prerequisite | Mathematics 1 = i
‘Assessment
Coursework 60%
Scheme | Final Exam 40%
Grading
Schema | Pass ~ 40% and above
Semester
Teunne Semester 2
‘fier completing this course, sludents should be able to
1. Categorize mathematical problems involving Trigonometry, Basic
Functions and Limits Concepts and Differentiations within the scope of
Learning technical engineering.
Outcomes | 2, Manipulate the calculus concepts in solving technical engineering
applications.
3. Contribute among group members towards continuous learning in solving
the technical problems,
Synopsis _| Trigonometry, Basics Functions, Limits of Functions, Basle Differentiation and
Application of Differentiation
Table of Contents
‘Chapter Content
1.0 | TRIGONOMETRY (5 hours)
LI Trigonometrie Ratios
1.1.1 Sine
111.2 Cosines
1.1.3 Tangent
41.2 Trigonometric equation
1.2.1 Solving simple trigonometric equation
1.2.2 Six trigonometric function of any angle (using quadrants).
Ketua Jabatan
Pengajian Am
KKTM Sri Gading13 Tigonometic identities
4.3.1 Solving problems by using trigonometric identities.
1.3.2 Sum, difference and co functions identities.
4.4 Calculator Application
1.5. Application of Trigonometry
1.5.1 Laws of Sines.
1.5.2 Laws of Cosines.
20
BASIC FUNCTIONS (3 hours)
2.4 Definition, domain and range .
2.2 Functional notation
2.3 Types of functions,
30
LIMITS OF FUNCTIONS (2 hours)
3.1 Concepts of Limits
3.1.1 one-sided
3.1.2 two-sided
3.2 Limits at infinity
3.3 Computing limits :
3.4 Limits and Continuity
40
BASIC DIFFERENTIATION (6 hours)
4.4 Differentiation from first principle
4.2 Techniques of differentiations
4.214 simple function
4.22 power rule
4.2.3 product rule
4.24 quotient rule
4.25 chain rule
4.3 Calculator Application
50
‘APPLICATION OF DIFFERENTIATION (3 hours)
5.1 Slopes of curves on road geometry
5.2 Curve sketching-beam deflection
5.2.1 Maximum-minimum
5.2.2 Inflection Points
5.3 Related rates
5.4 Calculator Application
References
1. Abd Wahid Ma. Raji, Hamisan Rahimal, emai Kamis, Mohd Nor Mohamad,
Ong Chee Tiong. (2003) Calculus for Science and Engineering Students.
Skudai : Penerbit UTM,
2. Anton, H., Bivens, I., Davis, S. (2002). Calculus, 7" Edition. Ine USA : John
Wiley & Sons
3. Marvin L. Bitinger and David J. Ellenbogen (2007), Calculus and its
Application. 9” Ecition. Inc. Boston, USA: Pearson Education
4. Quek Suan Goen, Leng Ka Man & Yong Ping Kiang (2004). Mathematics
STPM Selangor : Federal Publications
5. Weng, W. Y. (2005). Drive-A SPM : Matomatik Tambahan Tingkatan 5
Percetakan Anda Sdn, Bhd.Disediakan oleh (Prepared by)
Disemak oleh (Checked by)
Tandatangan Tandatangan
(Signature) (Signature): AoRUL Hef aM ei worANAD VATA
Nama (Name) : NoorHiday wd Nordin | Nama (Name) : ™iSaRrerertaraaman
Jawatan (Post) : Peg. Perkhid. Pendi Siswazah | Jawatan (Pos!) ae
Tarikh (Date): 4 Januari 2011 Tarikh (Date) : 04 JAN 201