Professional Documents
Culture Documents
Hard Disc Check Procedure
Hard Disc Check Procedure
figure1
figure3
press ENTER tofigure4
<>
All Rights reserved, No Spreading abroad without Permission of ZTE
figure4
click RAID PROPERTIES, press ENTER to figure5
figure5
check Drive Status. In this example, one disk is Primary, the other one is Not Syncd means
synchronization is going on.
If there is Yes under Pred Fai as below, it means hard disk is faulty. Need to pull out the
faulty hard disk according to the Slot Num. There are two disks located on a SBCX,the up one is
mapping the slot num 2, the below one is mapping the slot num 0
<>
All Rights reserved, No Spreading abroad without Permission of ZTE
<>
All Rights reserved, No Spreading abroad without Permission of ZTE