pn Ameren Mena Sancrd
ay Designation: F 993 ~ 86 (Reapproved 1996)"
"Oar aor et Gator, PASI.
Pere nth es Biot ASTM Sat Copy ASTI
Standard Specification for
Valve Locking Devices’
‘The sandard i ised under the ined eigaton F99%; the mer immedaely flowing the
edits the year of
designation
‘ngial adoption rin he ease of vison, the yar fast revion. Auber in aretha adc the ear fla appro A
‘Sipenerpepion (indicates an edtor change since the last revision oF reapproal.
Rare Keywords war added early fa Novoribr 196
1. Scope
1.1 This specification? covers the application, design, and
materials for valve locking devices.
1.2 Locking devices Types I and Il described in this speci-
fication are designed to secure the valve in a fully opened or
completely closed position.
1.3 This specification does not apply to valves equipped
with locking devices from the valve manufacturer, unless this
standard is invoked in the procurement ordering data for the
valve or its locking device, or both.
1.4 This specification is intended to supercede NASEA
Grawing $4824-1385509. However, cancellation of that
drawing and adoption of this specification can only be
‘effected by the navy.
2, Referenced Documents
2.1 ASTM Standards:
{A 36/A 36M Specification for Carbon Structural Stee!”
‘A.161 Specification for Stainless and Heat-Resisting Chro-
rmium-Nickel Steel Plate, Sheet, and Strip*
‘A 492 Specification for Stainless and Heat-Resisting Stee!
Rope Wire
‘A.668/A 668M Specification for Stee! Forgings, Carbon
and Alloy, for General Industrial Use
209 Specification for Aluminum and Aluminum-Alloy
Sheet and Plate!
B 580 Specification for Anodic Oxide Coatings on Alumi-
num?
F 708 Practice for Design and Installation of Rigid Pipe
Hangers!
22 Other Documents:
ANSI BI8.1 Small Solid Rivets?
‘American Welding Society D1.1 on Stee!"®
"This speciation is under the jure of ASTM Commitee F:25 oa
Shiptuling andi the diet respoasbaty of Satcommates 725.13 00 Piping
‘Curot eition approved March 27, 1986. Published Jue 1986.
2 This gecifcaion is ineded to supesede NAVSEA. Drawing. SA824-
1388500 However cancelation of hal raving and apsion oti spain
can only be elected by the Navy
* aa! Book of ASTM Standards, Vol O04
‘taal Book of ASTM Standards, Vol 0.03,
4 mal Book of ASTM Standard, Vol 01.9.
4 dau! Book of ASTM Standard, Vol 0202,
"annul Bok ef ASTM Stendads, Vol 0208.
‘maa! Book f ASTM Standards, Vol O07.
‘Saline om American Nana Standards nite, West 42a Set,
13th Foor, New York, NY 10036
Avalbe fom American Welding Society, $50 N.W. Le Jeune Ri, Mia
Fuse
3. Classification
3.1 Valve locking devices shall be classified by the fol-
lowing types and grades in aocordance with the method of
locking and material used.
32 Types:
32.1 Type I—Wire rope assembly (sce Fig. 1).
3.2.2 Type It—Handwhee! latch (see Fig. 2)
3.2.3. Type Ili—Locking shield. (se Fig. 4).
33 Grades:
33.1 Grade A—Stainless steel, Specification A 167, Type
316.
3.3.2 Grade B—Anodized aluminum, Specification
B 209, Alloy 5052.
3.3.3 Grade C—Carbon steel, commercial quality stel
4. Ordering Information
4.1 Orders for material under this specification shall in-
clude the following:
4.2 ASTM Designation and year of issue.
43 Type.
44 Grade.
4.5 Padlock Size (if necessary)
4.6 Rubber coating (if necessary).
4.7 Necessary Dimensions:
42.1 Type E:
4.7.11 Length of wire strand.
47.12 Diameter of pipe.
4.7.2 Type I:
4.72.1 Maximum height (flly opened).
4.722 Minimum height (fully closed).
4.7.23 Handwhee thickness.
4.7.2.4 Handwheel depth.
4.7.25 Diameter at location of attachment.
473 Type I:
47.3.1 Depth.
4.7.3.2 Height.
4733 Width.
4.73.4 Outside diameter (OD) of pipe.
5. Materials and Manufacture
1 Materials:
LL Type I Materials:
1.1.1 Pipe Clamp—Indicate diameter, similar to Prac-
F708, Fig. 1, material specified by grade.
S112 Ring Link—Size to be not less than clearance
shown in Practice F708, Table 3, Column F, material
specified by grade.
S.LL3 Common Wire Strand—Ywin,
5.
5.
5:
tice
diameter, 7hb F993
Re STRAND
a
RE SLEEVE GE ADEeTeENT ceLeoT
SEVER SEL
ee sieeve DSTETUHE METE NRE Lu)
ISI Eve
SiR TB
“
=
2.
FRONT VIEW
NG LEW
ToP VIEW
FIG. 1 Type Wire Rope Assembly
strands of 7 wires each, stainless steel, Specification A 492,
Alloy 316,
5.1.14 Tiller Rope Clamp—Yiein. cable size, manufac-
turer, stainless steel (optional).
SuLALS Rigid Eve Spring Hook—tein. eye diameter, Yin,
snap opening, plated forged steel, Specification A 668, Class
D.
5.1.1.6 Sleeve—Swaging, oval, for Yiein. diameter wire
rope, copper.
5.1.2 Type I Materials:
5.1.2.1 Modified Pipe Clamp—indicate diameter, similar
to Practice F 708, Fig. 1, material specified by grade,
5.1.2.2 Flat Head Rivet—M-in. nominal size, ANSI
BI8.1, material specified by grade.
5.1.2.3 Single Acting Quick Release Pin—M-in, nominal
size by Yiorin. grip, stainless steel, Specification A 167, Type
316.
5.1.2.4 Lanyard—Wire rope, ein, diameter, 7 strands of
7 wires each, 12 in. long, stainless steel Specification A 492,
Alloy 316,
5.1.2.5 Sleeve—Swaging, oval, for Yin. diameter wire
rope, copper.
5.1.2.6 Lanyard Clip—Flatbar, “ie in, thick by | in. wide
by I'8 in. Jong, stainless steel, Specification A 167, Alloy 316.
5.1.2.7 Lever Arm—Size to suit, 16 gage material speci-
fied by grade.
5.1.3 Type III Materials:
5.1.3.1 Plate—Indicate size, 16 gage, material specified by
5.1.3.2 Single Acting Quick Release Pin—Yin. nominal
size by Yin. grip, stainless steel, Specification A 167, Type
316.
3.1.3.3 Lanyard—Wire rope, Vein. diameter, 7 strands of
7 wires each, 12 in. long, stainless steel, Specification A 492,
Alloy 316.
5.1.3.4 Sleeve—Swaging, oval, for Yin. diameter wire
rope, copper.
5.1.3.5 Lanyard Clip—Flatbar, Vie in. thick by 1 in. wide
by 1% in. long, stainless steel, Specification A 167, Alloy 316.
5.1.3.6 Lockbar—Wi in, wide by length to suit by “ie in.
thick, material specified by grade,
5.2 Manufacture:
5.2.1 Edges of the locking device shall be smooth, The
devices shall also be free of defects and burrs
5.2.2 Welds shall be done in accordance with American
Welding Society standards D1.1.
6. General Requirements
6.1 A label plate shall be installed on or near the locking.
device to instruct the operator on usage.
6.2 When noise reduction is necessary the contacting
parts of the locking device shall have a rubber coating or
lining.
6.3 The locking device must be able to lock the valve in
both the fully opened and completely closed positions.
6.4 When using Type I, the cable shall be installed
sufficiently tight to prevent more than slight movement of
the handwheel in a direction opposite of the designed
position but not so tight as to place the cable in tension,
6.5 The position of the locking device on the handwheel
shall be as to resist movement of the valve stem.
6.6 Type Il dimensions shall be used to determine the size
of the lever arm, extension on pipe hanger, and the position
Of the locking holes and slot.
6.7 When specified by the purchaser, a padlock can be
‘used instead of the quick release pin or spring hook.
7. Dimensions and Tolerances
7.1 Dimensions shall be as specified in Figs. 1 through 5.
7.2 Tolerances are +e in. except for drilled hole diam-
ter for pin which shall be + Viz in., —0 in,
8. Keywords
8.1 locking device; marine technology; shi
locking device
valves valveES8Ea Bosqh F993
as baaweres.
gyaverey AT Location LSbaRE SiN ae
as operas
hate POR RSET
i 1
Serpe Delt “a*
la
Lanyard Cp Dee“
AA" OIMEER Lone my HeLE
Poh OLY ceo BOSE Pan
1/4" DINMETER LOOK PIN HOLE
FoR ron DNeD Baer TaN
V/A S10 FoR BEET
1H teNSte ro euTT
Lever Arm Deal
FIG. 4 Misceltancous Type i Dotaiedh Fos
TA96 meL
Tee?
SIDE VIEW eM
FRONT VIEW
p~-DEEIE
soo
7
Lock BAR
DETAIL "0"
Top VIEW
FIG. § Type ilValve Cover Box
‘The American Soc a Testing and Mate aks 0 postin respacing the vay of any patent ps assed connection
vary am marion ini stardaré Urs ns standard are expres advised tat Ontario of the vay fery suc
[atert rts, andthe ik of tamer of Such is, are ene Ie own reepanaly.
‘he standard le subject to revision any tne byte respon etna! commie and must be reviews avy fve years ad
\tpotvvied, ete! eaporoved or wahcrewn. You carmen ar ited athe fr eis othe sada oor aciona sarc
tnd shou be adronsed 10 AST Hear. Your cormerts wil ecave cara caraieralon ala medig of te respontie
Technical corte, which you tay aton. yu fea iat your commana have Mex raceled faking you shoud ke yur
‘Cows ncn tote ASTI Committ Sanda, 700 Bar Harbor Drv, West Conshehocte, PA 16428.