You are on page 1of 1

Version : 3

CRAYMUL 2126 Date : June 06


Waterborne polymers Redactor :CR

Acrylic emulsion
Application COATINGS

DESCRIPTION and KEY PERFORMANCE PROPERTIES

CRAYMUL 2126 is a pure acrylic emulsion which offers :


- high UV resistance and exterior durability
- high solid contents.
CRAYMUL 2126 is used as binder for high quality exterior paints .

CRAYMUL 2126 is formulated without alkylphenolethoxylates.

SALES SPECIFICATIONS TYPICAL CHARACTERISTICS

Solid Content (105°C) % 59 – 61 MFFT °C ∼ +6


ISO 3251 ISO 2115
pH 8–9 Specific Gravity g/cm3 1.09
(ISO 976) ISO 2811/1
Brookfield Viscosity mPas 2000-6000 Freeze Thaw Stability °C -5
(RVT 23°C; 20rpm) (ISO (ISO 1147)
2555)
Tg (DSC) °C +9
DSC
Stabilizing system A/NI

Average particle size nm 350

APPLICATION GUIDELINES OTHERS

Rheology and viscosity can be controlled by using cellulosic and


MATERIAL SAFETY DATA SHEET
associative thickeners .
A materiel Safety Data Sheet of CRAYMUL 2126 is
The use of defoamers such as Nopco® 8034 is recommended. available with all pertinent indications for use

Despite its low MFFT solvents such as Texanol® can be added STORAGE
to improve its film formation. Like all polymer emulsions, CRAYMUL 2126 has to
be kept in glass-fibers reinforced polyesters tanks (or
stainless steel) where the temperature must always be
in the range of +5° to 30°C. CRAYMUL 2126 is
protected by a bactericide in small amount but should
better be kept off from accidental bacterial attack.
Providing adequate storage conditions, CRAYMUL
2126 can be kept at least 6 months without any change
in its characteristics.

The information contained in this document is based on trials carried out by our Technical centres and data selected from literature, but shall in no event be
held or constitute or imply any warranty or undertaking, expressed or implied, or commitment on our part. Our formal specifications define the limit of our
commitment. No liability whatsoever can be accepted by CRAY VALLEY with regard to the handling, processing or use of the product or products
concerned which must in all cases be employed in accordance with all relevant laws and/or regulations in force in the country or countries concerned.

UPC 2126 CRAY VALLEY


LA DEFENSE 2 – 12, PLACE DE L’IRIS – F- 92062 PARIS LA DEFENSE CEDEX – Tel : +33 (0) 1 47 96 98 50
www.crayvalley.com

You might also like