Professional Documents
Culture Documents
Yes this is a repeat from 2 months ago, but I am on vacation and the blog subject is
more than relevant for this HOT summer weather and helpful when comparing solutions for
EXAIR Cabinet Cooler systems have significant advantages over other cooling options. Our Cabinet
Cooler systems are UL listed for NEMA 12, 4 and 4X integrity and are marked CE for conforming to
European Union safety standards. This blog entry will highlight the benefits and compare them
Cabinet Cooler systems use Vortex Tube technology, with no moving parts, to create the cold air
outlet flow which is pumped into an electronic cabinet. As air is pushed into the cabinet the Cabinet
Cooler system also provides its own built-in exhaust so there is no need to vent the cabinet. This
creates a positive purge on the cabinet which will keep dirt, dust and debris out of the cabinet.
Refrigerant air conditioning units have many moving parts including a compressor, condenser blower
motor and evaporator blowers. All of these products can and will break down, costing you hundreds of
dollars in repairs. Most manufacturers warranty these products for 2 years. EXAIR Cabinet Cooler
EXAIR Cabinet Cooler systems are unaffected by vibration which can cause refrigerant leaks and
component failures in traditional air conditioners. Please don’t be shocked when you shell out $600.00
for a new compressor – more than complete NEMA 12 Cabinet Cooler system with solenoid and
thermostat!
And don’t forget about the floor drain to capture the condensate from the condenser in an air
conditioner, but no worries from a Cabinet Cooler unit there is no troublesome by-product to deal
with. You must also regularly keep your vent filters clean so you do not damage the refrigerant cooler,
these products are not suitable for harsh or dirty environments like an EXAIR Cabinet Cooler systems.
When you receive your EXAIR Cabinet Cooler system all you need to do is open the box and install it
into a standard knockout hole; there is no need to let the compressor oil settle or worry about any
shipping damage which will void your warranty. No need to cut the side of your cabinet open for
installation.
Heat exchangers, though less expensive are also less effective. Heat exchangers are negatively
affected by a rise in temperature. In other words, the more you need them to cool your cabinet in the
summer time, the less ability they have to do it as the weather warms! Heat exchangers are
significantly de-rated as the outside temperatures rise. Cabinet Cooler systems are not dependent
Heat exchangers also fail when dirt and dust clog the air intake filters. Cabinet Cooler systems again
do not use ambient air but compressed air which should be clean and dry. The right quality of air is
easily achieved through the use of a compressed air filter which is typically included in a Cabinet
Cooler system. Replacement filter elements for a Cabinet Cooler unit should be installed twice a year
Cabinet Cooler systems are not only extremely effective but also operate efficiently by using a
thermostat control to turn themselves on and off only as needed. As the seasons change and your
cabinet does not get as hot during the winter, the cooler shuts itself off (you won’t even notice it until
it turns back on during a hot day). If you do not generate heat in your cabinet due to a shutdown or
running one shift, it will again turn itself off. A thermostat control ensures optimum efficiency by
turning it off when not in use, just like STEP 4 in the 6 Steps to Optimization.
In Summary:
EXAIR Cabinet Coolers systems are UL listed to maintain the NEMA 12, 4 and 4X integrity of
Can create a positive purge on the cabinet to keep dirt and debris from entering the cabinet.
Inexpensive to purchase.
EXAIR Cabinet Coolers systems are an inexpensive solution which will payoff for years to come!
11510 Goldcoast Drive
Cincinnati, OH 45249
TecHelp@EXAIR.com