Professional Documents
Culture Documents
Name: Muhammad Faiz Bin Abdul Latif ID No: 52208110142 (L01)
Name: Muhammad Faiz Bin Abdul Latif ID No: 52208110142 (L01)
ID no : 52208110142
(L01)
Step 4
Task 4
1. What is the bridge ID priority for switches S1, S2, and S3 on VLAN 1?
a. S1 : 32769
b. S2 : 32769
c. S3 : 32769
3. On S1, which spanning tree ports are in the blocking state on the root switch?
No blocking state
6.Since the bridge priorities are all the same, what else does the switch use to determine the root?
- Choosing the most centralized switch on the network
- Sent out Bridge Protocol Data Unit(BPDU) includes the Bridge ID
Task 5
Step 3
When the link from S2 that is connected to the root switch goes down, what is its initial
conclusion about the spanning tree root?
F0/2 at S2 is chosen or elect as the spanning tree root after the fa0/1 at S1 is shutdown because it
is the most centralized switch on the network.
Once S2 receives new information on Fa0/2, what new conclusion does it draw?
It is been elected as a spanning tree root.
Port Fa0/2 on S3 was previously in a blocking state before the link between S2 and S1 went
down. What states does it go through as a result of the topology change?
Not in blocking state
Step 4
Task 5
Step 2:
1. What is the bridge ID priority for switches S1, S2, and S3 on VLAN 99?
a. S1 : 32867
b. S2 : 32867
c. S3 : 32867
2. What is the bridge ID priority for S1 on VLANs 10, 20, 30, and 99?
a. VLAN 10 :32778
b. VLAN 20 :32788
c. VLAN 30 :32798
d. VLAN 99 :32867
4. On VLAN 99, which spanning tree ports are in the blocking state on the root switch?
None. No blocking port
5. On VLAN 99, which spanning tree ports are in the blocking state on the non-root switches?
a. fa0/2
b. fa0/2, fa0/3, fa0/4
7. Since the bridge priorities are all the same, what else does the switch use to determine the
root?
Use the “ set spantree priority” command which provides a third method to specify the root
switch.
Task 6
On VLAN 99, which spanning tree ports are in the blocking state on the new root switch?
None
On VLAN 99, which spanning tree ports are in the blocking state on the old root switch?
None