TOA CEILING SPEAKER PC 2668
MDESCRIPTION
The TOA PC-2668 speaker can be mounted (exposed installation) to the ceiling where flush, mounting
is impossible. It can be easily installed thanks to its spring catch method. Pushin. connector
allows quick wire connection, and speaker lines can be bridged by bridging terminals
The supplied bracket can be mounted to a flush=mount pull box
MSPECIFICATIONS
Rated Input 6 Wtfor 100 VUinel, 3 Wier 70 V Lined
Rated Impedance TOO V Line: T7 RO (6 Wi, 53.kQ (3 Wi,
(6.7 KQ11.5 Wi, 13 kQ (0.8 Wh Internal wiring must be changed)
70 V line: 1.7 KO (3 Wh, 3.3 KO 115 Ml
(6.7 kO (0.8 W), 13 kQ (0.4 Wi: Intemol wiring must be changed)
Sound Pressure Level [90 dB 11M, Tm, 330 = 3,300 Hz Pink noise)
Frequency Response 100 = 16,000 Hz
Speaker Component 12 em_dynomic_cone=type speaker
Speaker Mounting Method [Spring catch
Applicable Cable
600 V Vinyl-insulated coble (IV wire of HIV wire!
Solid copper wire: 00.8 - 91.2 mm.
T—core twisted copper wire: 0.75 = 1.25 mnt
Connection Push=in connector (Bridging terminal—2 branch type?
Finish Baffle: ABS resin, off-white (RAL 9010 or equivalent color}
Dimensions 6260 _X 92 (D} TExposed section) mm
Weight 820 q {Bracket included)
APPEARANCE 63-91
The in—celling box is usable
for mounting hele distance
of 63-81 mm
17 wy
2 gl 7K ag IP
° d 4 b
7 bd
Mounting bracket_dimensions
Watching
transformer
Terminal eal
BWE3.3kQ> BRN § 7st
omimean | feeheu 24
fan H il]
com ta WHT co
‘Transformer cannedtion when
the speaker is supplied trom
the fosters)
Wiring Diagram
ging terminal
UNIT:mm — SCALE:1/3 [Note] Use tronsformer terminals when changing input impedance.
a TOA Corporation DWG No: GPcoz4al—2