Professional Documents
Culture Documents
Powell Valve Catalog 2000
Powell Valve Catalog 2000
------- FIG U R E
NUMBER
INDEX-----
Page
Fig No.
Page
100
102 14
110 12
116.11610 20
120 13
120m 13
150 13
151 11
180 12
200
241 26
300
375 8
377 8
500
500 3
507 3
512 3
514 3
559 27
559P 27
560 19
560TD 19
563 19
578 18
57810 18
600
650 10
1200
1202 14
1259 27
1300
1303,1303WE 42
1313,1313WE 77
1323, 1323WE 79
1331. 1331WE 48
1341,1341WE 77
1351. 1351 WE 79
1361. 1361WE 55
1395. 1395WE 56
1400
1414 6
1500
1503. 1503WE 34.35.36
1513.1513WE 77
1523. 1523WE 79
1531. 1531WE 44
1533.1533WE 44
1541. 1541WE 77
1543,1543WE 77
1551,1551WE 79
1553,155SWE 79
1561,1561WE 51
1595,1595WE 56
1700
1787 22
1793 23
1797 24
1800
1816 23
1821 5
1822 5
1823 11
1825 18 Fig No.
Page
Fig No.
Page
Fig No.
182510 18
1832 82
1842 7
1847 93
1861 87
1893 25
1900
1972 86
1973 86
1976 93
1982 92
1983 92
2000
2002 98
2003 98
2004 99
2005 99
2006 100
2007 100
2100
2172 101
2173 101
2300
2309 102
2310 102
2341 94
2342 94
2345 96
2346 96
2349 97
2350 97
2375 9
2377 9
2400
2446 90
2447 90,91
2456 84
2466 85
2467 85
2474 88
2475 88,89
2490 83
2491 83
2494 83
2495 83
2600
2600 16
2608 17
2612 17
2629 89
2633 95
2700
2700 4
2712 4
2714 4
2800
2842 7
2872 15
2900
2920 103
2921 104
2922 103
2923 104 3000
3003. 3003WE 37.38.39
3013,3013WE 77
3023, 3023WE 79
3031,3031WE 45
3033, 3033WE 45
3041.3041WE 77
3043. 3043WE 77
3051.3051WE 79
3053, 3053WE 79
3061,3061WE 52
3084, 3084WE 49
3086, 3086WE 49
3095, 3095WE 56
3400
3460 21
3462 21
6000
6003.6003WE 40
6013.6013WE 77
6023. 6023WE 79
6031. 6031 WE 46
6033, 6033WE 46
6041,6041WE 77
6043,6043WE 77
6051. 6051 WE 79
6053. 6053WE 79
6061, 6061 WE 53
6084.6084WE 50
6086. 6086WE 50
6095, 6095WE 56
9000
9003. 9003WE 41
9013,9013WE 77
9023. 9023WE 79
9031. 9031 WE 47
9033. 9033WE 47
9041. 9041 WE 77
9043. 9043WE 77
9051.9051WE 79
9053, 9053WE 79
9061.9061WE 54
9095, 9095WE 56
11000
11095WE 76
11300
11303WE 62.63
11313WE 77
11323WE 79
11331WE 67
11331Y-WE 65
11333WE 67
11341WE 77
11343WE 77
11351WE 79
11353WE 79
11361WE 75
11365WE 73
11365Y-WE 74
11367WE 73
11384WE 71
11384Y-WE 71
11386WE 71 16000
16003WE 62,63
16013WE 77
16023 79
16031WE 67
16031Y-WE 65
16033WE 67
16041WE 77
16Q43WE 77
16051WE 79
16053WE 79
16061WE 75
16065WE 73
16065Y-WE 74
16067WE 73
16084WE 71
16084Y-WE 69
16086WE 71
'6095WE 76
19000
19003WE 62,63
19013WE 77
19023WE 79
19031WE 67
19031Y-WE 65
19033WE 67
19041WE 77
19043WE 77
19051WE 79
19053WE 79
19061WE 75
19065WE 73
19065Y-WE 74
19067WE 73
19084WE 71
19084Y-WE 69
19086WE 71
19095WE 76
25000
25003. 25003WE 43
25023. 25023WE 79
12000
120003WE 61,62
12()13WE 77
12500
125003WE 61,62
125013WE 77
125023WE 79
125031WE 67
125031Y-WE 65
125033WE 67
125041WE 77
125043WE 77
125051WE 79
125053WE 79
125065WE 73
12506SY-WE 74
125067WE 73
125084WE 71
125084Y-WE 69
125086WE 71
125095WE 76 III
POWELL BRONZES
Steam Bronze Castings ASTM B·61
This high grade alloy is used for valves and other products recommended for higher pressures and for temperatures to 5500 F.
Chemical Requirements Copper, %
Tin,%
Lead, %
Zinc, %
Nickel, %
Iron, %
Phosphorus, %
Minimum 86.0 5.5 1.0 3.0
Maximum 90.0 6.5 2.0 5.0
1.0 0.25
0.05
Tensile Properties
Tensile strength, psi
34,000
Yield strength, psi
16.000
Elongation in 2", %
24
Composition Bronze Castings ASTM B·62
This bronze is widely used for valves, fittings and other products for temperatures up to 4500 F. It is commonly known as 85-5-5-5.
Copper·Zine-Silieon Alloy Rod ASTM 8·371, Alloy C6940D
Alloy C69400 has excellent strength and is used mainly as a valve trim.
Minimum 80.0
Maximum 83.0 0.20 .30 4.5
Chemical Requirements Copper, %
Iron, %
Lead, %
SlIicon, %
Zinc, %
3.5 Remainder
Tensile Properties Tensile strength, psi Up to 1 in. incl. Over 1 in.
Yield strength, psi Up to 1 in. incl. Over 1 in.
Elongation in 4 x Dla., % Up to 1 in. incl.
Over 1 in.
80,000 75,000
40,000 35,000
15 15
Chemical Requirements Minimum Maximum
Copper, % 84.0 86.0
Tin, % 4.0 6.0
Lead, % 4.0 6.0
Zinc, % 4.0 6.0
Nickel, % 1.0
Iron, % 0.30
Phosphorus, % 0.05
Tensile Properties
Tensile strength, psi 30,000
Yield strength, psi 14,000
Elongation in 2", % 20
POWELL IRONS 3% Nickel Iron
Cast Iron 3% Nickel Iron is used for corrosive services where ordinary
ASTM A126, Class B gray iron is not adequate for
Chemical Requirements Minimum Maximum the paper, pulp and petroleum industries.
Sulfur, % 0.15 Chemical Requirements Minimum Maximum
Phosphorus, % 0.75
Carbon, % 3.15 3.45 Carbon, % 3.00 3.50
Manganese, % 0.65 0.75 Manganese, % 0.50 0.75
Silicon, % 1.80 2.10 Silicon, % 1.50 2.50
Sulfur, % 0.05 0.10
Tensile Properties Phosphorus, % 0.10 0.50
Tensile strength, psi 31,000 Nickel, % 3.00 4.00
Traverse strength, 3,300 Tensile Properties
pounds Tensile strength. psi 31,000
Deflection at center, 0.12
inches THE WM. POWELL COMPANY - SINCE 1846
2
BRONZE GATE VALVES
''U.s.''
Fig. 500,514
Inside Screw Rising Stem Sizes, 1f4" through 3"
CLASS 125 and 150 SCREWED·IN BONNET THREADED ENDS
PRESSUREITEMPERATURE RATINGS Class 125 Fig. 500,507
125 psi Steam at 406°F
200 psi Non-Shock Cold Water, OU or Gas
Class 150 Fig. 512, 514
150 psi Steam at 406°F
300 psi Non-Shock Cold water, Oil or Gas
MATERIALS
DESCRIPTION MATERIAL ASTM Spec.
Handwheel Nut Brass Commercial
Idenlificallon Plate Aluminum Commercial
Handwheel Malleable Iron A-47 Gr. 32510
Stem Silicon Bronze 8-371 C69400
Packing Gland Brass B-16
Packing Nut • Bronze B-62
Packing Graphite Non-Asbestos Commercial
Bonnet Bronze B-62
Stuffing Box· • Silicon Bronze B-371 C69400
Body Bronze B-62
Wedge Bronze B-62
* Brass ASTM 8-16 for 1/4" through 1" valves
•• Furnished on Figs. 507 and 512
SPECIFICATIONS
·MSS-SP-80
Fig. 501, 512 FEATURES
Inside Screw Non-rising Stem =Renewable Solid Wedges
Sizes, 1/4" through 3" -Integral Seats
-High-TensHe bronze Alloy Stem
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3
A 13/4 2 23/8 27/16 23/4 3 33/8 31/2 41/2 5
B 41f4 41{4 47/8 61/8 73f8 85f8 95{8 1111/16 143f4 171{8
C 21/8 21/8 21/2 23/4 3 31/4 35/8 41116 51/8 511/16
0 31/2 31/2 315/16 49/16 57/16 61/4 63/4 713/16 93/8 103/8
WEIGHTS (pounds)
Fig. 500 0.75 0.8 1.1 U5 2.8 3.75 5 7.2 16 22.2
Fig. 500 Fig. 507 Fig. 507 0.75 0.8 1.1 1.75 2.8 3.75 4:6 6.5 12.6 19.3
Fig. 512 0.7 0.7 1 1.6 2.4 3.6 4.6 6.7 13.1 20
Fig. 514 Fig. 512 Fig. 514 0.7 0.9 1 1.7 2.8 4 5 7.2 16 22.5 THE WM. POWELL COMPANY - SINCE 1846
3
BRONZE GATE VALVES
"u.s."
Fig. 2700, 2714 Inside Screw Rising Stem Sizes, 1W through 3"
Fig. 2712
Inside screw Non-Rising Stem Sizes, 1/4" through 3"
CLASS 125 and 150 UNION BONNET
THREADED ENDS
PRESSUREfTEMPERATURE RATINGS Class 125 Fig. 2700
125 Steam at 406°F
200 psi Non-Shock cofd water, Oil or Gas Class 150 Fig. 2712, 2714
150 Steam at 406°F
300 psi Non-Shock Cold water, Oil or Gas
MATERIALS
DESCRIPTION MATERIAL ASTM Spec.
Handwheel Nut Brass Commercial
Identification Aluminum Commercial
Plate
Handwheel Malleable Iron A-47 Gr. 32510
Stem Silicon Bronze B-371 C69400
Packing Gland Brass B-16
Packing Nut * Bronze B-62
Packing Graphite Non-Asbestos Commercial
Stuffing Box" ,. ,. Silicon Bronze B-371 C69400
Bonnet" ,. Bronze b·62
Bonnet Ring Bronze B-62
Body Bronze B-62
Wedge Bronze B·62 • Brass ASTM B·16 for 1/4" through 1" valves
•• Silicon Bronze - C69400 for 114", 3/8" and 1/2" valves Fig.2712 ••• Furnished on Fig. 2712
SPECIFICATIONS -MSS-SP-80
FEATURES
-Renewable Solid wedges
-Integral Seats
-High-Tensile Bronze Alloy Stem
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 11/4 11/2 2 21/2 3
A 13/4 2 23/8 27/16 23/4 3 33/8 31/2 41/2 5
B 41/4 41/4 47/8 61{8 73/8 85/8 95/8 1111/16 143/4 171/8
C 21/8 21/8 21/2 23/4 3 31/4 35/8 41/16 51/8 511/16
D 31/2 1/2 315/16 49/16 57{16 61/4 63/4 713/16 93/8 103/8
WEIGHTS (Pounds)
Fig. 2700 0.75 0.8 1.1 1.9 2.7 4 5.2 8.9 16.2 23
Fig. 2712 0]5 0.8 1.1 1.9 2.7 4 5.2 8.9 16.2 23
Fig. 2714 0]5 0.8 1.1 2 2.7 4 5.3 9.5 16.2 23.5
Fig. 2700 Fig. 2712
Fig. 2714 THE WM. POWELL COMPANY - SINCE 1846
4
BRONZE GATE VALVES
"U.S."
Fig. 1821
Inside Screw rising Stem Sizes, 1/4 through 3
Fig. 1822
Inside Screw Non-Rising Stem Sizes, 1/4' through 3~
CLASS 125
SCREWED-IN BONNET SOLDER JOINT TUBING ENDS
PRESSUREITEMPERATURE RATINGS 125 psi Steam at 406°F t
200 psi Non-Shock Cold Water, Oll or Gas
t This pressure rating applies to the valve bodies. Solder joint valves should NOT be used in services where the temperature of the fluid being handled is higher than the point at which the solder begins to soften.
MATERIALS
DESCRIPTION
MATERIAL
ASTMSpec.
Handwhee! Nut Identification Plate Handwheel
Stem
Packing Gland Packing Nut * Packing Stuffing Box" 1< Bonnet
Body
Wedge
Brass Aluminum Malleable Iron Silicon Bronze Brass
Bronze
Graphite Non-Asbestos Silicon Bronze
Bronze
Bronze
Bronze
Commercial Commercial A-47 Gr. 32510 B-371 C69400 B-16
B-62 Commercial B-371 C69400 8-62
B-62
8-62
"Brass ASTM Bw16 for 1/4" through 1" valves **Furnished on Fig. 1822
SPECIFICATIONS ·MSS-SP-80 ·ASME 816.18
FEATURES
-Renewable Solid wedges
-Integral Seats
-High-Tensile Bronze Alloy Stem
Fig. 1821
Fig. 1822
THE WM. POWELL COMPANY - SINCE 1846
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3
A 13/4 21/4 23/4 31/8 31/2 3 3/4 4 41/2 51/4 6
B 1/2 11/16 13/16 1 11/16 11/8 13/16 13/8 15/8 17/8
C· .379 .504 .629 .879 1.130 1.380 1.630 2.130 2.630 3.130
G 41/4 41/4 47/8 61/8 73/8 85/8 95/8 1111/16 143/4 171/8
G1 31/2 31/2 315/16 49/16 57/16 61/4 63/4 713/16 93/8 105/8
H 21/8 21/8 21/2 23/4 3 31/4 35/8 41/16 51/8 511/16
"folerance per ASME 816.18 WEIGHTS (Pounds)
Fig. 1821 0.75 0.75
Fig. 1822 0.75 0.75
1.1 0.9
1.6 1.5
2.6 2.4
4.1 3.3
4.7 5.1
5
7.7 7.1
13.8 11.9
21.7 19.1
BRONZE O.S.&Y.
GATE VALVE
Fig. 1414
Flanged, One-Piece Bonnet Sizes, 4" and 6"
Fig. 1414
Flanged, Separable Yokearms Sizes, 8" - 16"
CLASS 150
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM FLANGED ENDS
PRESSUREfTEMPERATURE RATINGS 150 psi Steam at 406°F
225 psi Non-Shock Cold Water, Oil or Gas MATERIALS
DESCRIPTION MATERIAL ASTM Spec.
Stem Bushing Nut Malleable Iron A-47, Grade 32510
HandwheelKey Steel A-108. Grade 1020
Handwheel Malleable Iron A-47, Grade 32510
Cap Screws Steel A-449
Bearing Cap Malleable Iron A-47, Grade 32510
Yokearm Ear Bolts &
Nuts (S" -16") Steel A-307, Grade B
Yokearm Bolts &
Nuts(S"-16") Steel A-307, Grade B
Stem Bushing Bronze B-62
Bonnet Bronze B-62
Eyebolts Stainless Steel 300 Series
Eyebolts Nut, & Pins Stainless Steel 300 Series
Gland Bronze 8-62
Packing Non-Asbestos Commercial
Body Nuts Brass 8-16
Body Bolts Steel A-307, Grade 8
Gasket Compressed
Non-Asbestos Commercial
Stem Brass 8-16
Wedge Bronze B-62
Body Bronze B-62
lubricant Fitting Steel Commercial
Yokearms (8"-16") Malleable Iron A-47, Grade 32510 SPECIFICATIONS
-Flanqed End valves have dimensions in accordance with ASME B16.24
FEATURES
-Renewable Solid Wedges
-lnteqral Seats
-High- Tensife Brass stems
-Larqe stuffing box
Fig. 1414
THE WM. POWELL COMPANY - SINCE 1846
DIMENSIONS (Inches)
Size 4 6 8 10 12 14 16
0 9 10112 11 1/2 13 14 15 16
A 201/4 30 373/8 48114 57718 64 74318
V 9 12 14 17 18 22 22 Fig. 1414
WEIGHTS (Pounds)
560
80
157
255
475
e
BRONZE GATE VALVES "WHITE STAR"
CLASS 200 UNION BONNET SOLDER JOINT and
SILVER BRAZE TUBING ENDS
PRESSURElTEMPERATURE RATINGS 200 psi Steam at 550°F t
400 psi Non·Shock Cold Water, Oil or Gas
t This pressure rating applies to the valve bOdies. Solder joint valves should NOT be used in services where the temperature of the fluid being hand ted is higher than the point at which the solder begins to soften.
MATERIALS
DESCRIPTION MATERIAL ASTM Spec.
Handwheel Nut Brass Commercial
Identification Plate Aluminum Commercial
Handwheel Malleable Iron A-47 Gr.32510
Fig. 1842 Stem Silicon Bronze B-371 C69400
Solder Joint Tubing Ends Packing Gland Brass 816
Inside Screw Rising Stern Packing Nut' Bronze B-62
Sizes, 1/4" through 3" Packing Graphite Non-Asbestos Commercial
Bonnet Bronze 8-61
Bonnet Ring Bronze B-61
BOdy Bronze B-61
Wedge Bronze 8-61
·Brass ASTM B- 16 for 1/4" through 1" valves SPECIFICATIONS
·MSS SP-80
·MSS SP-73
-ASME B16.18
FEATURES
Fig. 2842 =Renewable Solid Wedges
Silver Braze Tubing Ends -High-Tensile Bronze Alloy Stems
Inside Screw Rising Stem ·Integral Seats
Sizes, 1/4" through 3"
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3
A(Fig.1B42)S.J.T. 13/4 21/4 23/4 31/8 31/2 33/4 4 41/2 41/2 6
(Fig.2B42) S.BJ 13/4 21/4 21/2 3 31/4 31/2 4 41/2 51/4 6
B(Fig.1B42)S.JJ. 1/2 11/16 13/16 1 11/16 11/8 13/16 1318 15/8 17/8
(Fig.2B42)S.BJ. 17/64 5116 3/8 13/32 7/16 1/2 5/8 21/32 25/32 53/64
_. _.kM---I C· .379 .504 .629 .879 1.130 1.380 1.630 2.130 2.630 3.130
!
\ G 41{4 41/4 47/8 61{8 73/8 85/8 95/8 HW16 151/8 171/16
H 21/8 21/8 21/2 23/4 3 31/4 35/8 41/16 511/16 63/8
~
....
1 *Tolerance per ASME B16.18
,
-.
~.-- WEIGHT (Pounds)
Fig. 1842 Fig. 2842 Fig.1B42 0.8 0.9 1.1 1.9 2.6 5 6.5 8.2 17.6 24.3
Fig.2M2 U.S 0.9 1.1 1.9 2.6 5 6.5 8.2 17.6 24.3 THE WM. POWElL COMPANY - SINCE 1 $46
7
BRONZE GATE VALVES "WHITE STARn
Fig. 375 Fig. 377
Inside Screw Rising Stem Sizes, 1/4" through 3"
CLASS 200 and 300 UNION BONNET THREADED ENDS
PRESSUREITEMPERATURERATINGS Class 200 Fig. 375
200 psi Steam at 550°F
400 psi Non-Shock Cold Water, Oil or Gas
Class 300 Fig. 377
300 psi Steam at 550°F
1/4" - 2" 1000 psi Non-Shock Cold Water, Oil or Gas 2 1/2" - 3" 600 psi Non-Shock Cold Water, Gil or Gas
MATERIALS
DESCRIPTIONS MATERIAL ASTM Spec.
Handwheel Nut Brass Commercial
Identification Plate Aluminum Commercial
Handwheel Malleable Iron A-47 Gr. 32510
Stem Silicon Bronze B-371 C69400
Packing Gland Brass B-16
Packing Nut * Bronze B-62
Packing Graphite Non-Asbestos Commercial
Bonnet Bronze B-61
Bonnet Ring Bronze B-61
Body Bronze B-61
Wedge Bronze B-61 *8rass ASTM 8-16 for 1J4" through 1" valves
SPECIFICATIONS ·MSS-SP-BO
FEATURES
-Renewable Solid Wedges
-Integral Seats
-High- Tensile Bronze Atloy Stem
51ze
DIMENSIONS (Inches) Figs. 375
A B C
1 13/16 41/4 21/8
114
318
11/4
11/2
1/2
314
1
2
21/2
21/16 4114 21/8
31/8 85/8 31/4
45/8 151/8 43/4
51/8 177{16 511/16
27/16 47/8 21/2
29/16 61/8 23/4
2 15/16 73/8 3
31/2 95/8 35/8
4 1111/16 41/16
DIMENSIONS (Inches) Figs 377
Size 1{4 3/8 112 3/4 1 11/4 11/2 2 21/2 3
A 1 15/16 21/8 27/16 211/16 3 33/8 33/4 43/8 5 55/8
B 47/8 47/8 57/8 73/16 81/4 91/2 103/4 131/8 141/16 163/8
C 3 3 31f4 35(8 41/8 45(8 SitS 5 11/16 S 9
Fig. 375 WEIGHTS (Pounds)
Fig. 377
Fig.375 0.8 0.9 1.2 2 2.7 4.7 5.5 9.1 18.9 25.8
Fig.377 1.3 1.3 1.8 3 4.9 6.9 8.9 16.7 23.9 32.4 THEWM. POWELLCOMPANY-SINCE 1646
8
BRONZE GATE VALVES WITH ROLLED-IN SEAT RINGS "WHITE STAR"
Fig. 2375 Class 200
Inside Screw Rising Stem Sizes, 3/8" through 3"
Fig. 2377 Class 300
Inside Screw Rising Stem Sizes, 3/8" through 3"
CLASS 200 and 300 UNION BONNET THREADED ENDS
PRESSUREnEMPERATURERATINGS Class 200 Fig. 2375
200 psi Steam at 550°F
400 psi Non-Shock cold water, Oil or Gas
Class 300 Fig. 2377
300 psi steam at 550°F
3/8" - 2" 1000 psi Non-Shock Cold Water, Oil or Gas 2 1/2" & 3" 600 psi Non-Shock Cold Water, Oil or Gas
MATERIALS
DESCRIPTION MATERIAL
ASTM Spec.
Handwhee! Nut
Brass
Commercial
Identification Plate Aluminum Commercial
Handwheel Malleable Iron A-47 Gr. 32510
Stem Silicon Bronze B-371 C69400
Packing Nut ~ Bronze B-62
Packing Gland Brass 8-16
Packing Graphite Non-Asbestos Commercial
Collar** Brass B-16
Bonnet Bronze B-61
Bonnet Ring Bronze B-61
Body Bronze B-61
Wedge Bronze B-61
Seat Rlng Stainless Steel ''''''A-312, Type 304
* Brass ASTM B-16 for valve sizes 3/8" through 1" valves
h Sizes 3/8 - 112" inclusive (Fig. 2377)
"·Sizes 3/8 - 1/2" A-276, Type 410
SPECIFICATIONS ·MSS-SP-BO
FEATURES
·Renewable Solid Wedges =Rolled-in Seat Rings -High-Tensile Bronze Alloy Stems
Size
DIMENSIONS (Inches) Fig. 2375
11/2 2 21/2 3
A B E
318 1/2 3/4 1 1 1/4
2 1/16 25/16 29/16 2 15/16 31/8
4 1/4 4 7/8 6 1/8 7 3/8 8 5/8
2 1/8 2 1/2 2 3/4 3 3 1/4
3 1/2 4 4 5/8 5 1/8
95/8 1111/16 151/8 17 7/16
35/8 41/16 5 11/16 63/8
DIMENSIONS (Inches) Fig. 2377
Size 318 1/2 3f4 1 11/4 11/2 2 21/2 3
A 21/8 27/16 211116 3 33/8 33/4 43/8 5 55/8
B 47/8 57/8 73f16 81/4 91/2 103/4 131/8 141/16 163/8
E 3 31/4 35/8 41/8 45/8 51/8 5 11/16 8 9
Fig. 2375
Fig. 2377
WEIGHTS (Pounds)
Ftg.2375 0.9 1.2 1.9 2.8 5 5.4 8.9 18.7 25.9
Ftg.2377 1.3 1.7 2.9 4.2 6.5 9.5 16.7 22.6 31.7 THEWM. POWELL COMPANY-SINCE 1846
9
BRONZE GLOBE VALVES "CRESCENTH
Fig. 650 Globe, threaded Sizes, 1/4" through 3"
CLASS 125 SCREWED .. IN BONNET THREADED ENDS
PRESSUREnERMPERATURERATINGS 125 psi Steam at 406°F
200 psi Non-Shock cold water, Oil or Gas
MATERIALS
DESCRIPTIONS MATERIAL ASTM Spec.
Handwheel Nut Brass Commercial
Identification Plate Aluminum Commercial
Handwheel Malleable Iron A-47 Gr. 32510
Stem Silicon Bronze B-371 C69400
Packing Nut "* Bronze B-62
Packing Graphite Non-Asbestos Commercial
Bonnett Bronze B-62
Disc Locknut Silicon Bronze B-371 C69400
Disc Bronze B-62
Body Bronze 8-62
Horseshoe Ring * Stainless Steel A-582, Type 303 t Sizes 1/4" to 3/4" Brass ASTM B-16
* 3/4" Alternate material A-i67 Type 304
"* Brass ASTM B-16 for Valve Sizes 1J4" through 1 1J4" incl.
SPECIFICATIONS ·MSS-SP-80
FEATURES
·High-Tensile Bronze Alloy Stems ·'ntegra! Seats
·Discs in 3/4" and larger valves are attached to stem by disc locknut. The 1/2" and smaller valves have stem and disc integral
DIMENSIONS (Inches)
Size 1/4 3/8 1/2
3/4 1
11/4
11/2 2
21/2
3
A 1 5/8 115/16 2 1/8
G 211/16 3 33/8
H 21/8 21/2 23/4
Fig. 650
21/2 3
315{16 43/8 3 31/4
511/16 75116 51/8
69/16 81/4 53/4
37/16 51/16 35/8
313116 43/4
53/8 61/2
41/8 43/4
WEIGHTS (Pounds)
Fig.650 0.4 0.6 0.8
15.4
THE WM. POWELL COMPANY-SINCE 1846
1.3
1.9
10.1
2.7
4.4
5.9
10
BRONZE GLOBE and ANGLE VALVES "UNION"
CLASS 150 UNION BONNET
RENEWABLE COMPOSITION DISC THREADED and SOLDER JOINT ENDS
PRESSUREnEMPERATURERATINGS 150 psi Steam t at 406eF
300 psi Non-Shock cold Water, Oil or Gas
t This pressure rating applies to the solder joint end valve bodies. Solder joint valves should NOT be used in services where the temperature of the fluid being handled is higher than the point at which the solder begins to soften.
MATERIALS
DESCRIPTIONS MATERIAL ASTM Spec.
Handwheel Nut Brass Commercial
Identification Plate Aluminum Commercial
Handwheel Malleable Iron A-47 Gr. 32510
Stem Silicon Bronze B-371 C69400
Fig. 151 Packing Nut· Bronze B-62
Angle, Threaded Packing Gland Brass B-16
Sizes, 1(4" through 3" Packing Graphite Non-Asbestos Commercial
Fig. 150 Bonnet Bronze B-62
Globe, Threaded Bonnet Ring Bronze B-62
Sizes, 1/4" through 3" Disc Locknut" Silicon Bronze B-371 C69400
Horseshoe Ring •• Stainless Steel A-582. Type 303
Disc Holder Bronze B-62
Disc Glass Filled PTFE Commercial
Disc Nul Bronze B-62
Body Bronze B-62
* Silicon bronze 6-371 C69400 Sizes 1/4" to 1" incl. Fig. 1823
Globe, Solder Joint Ends Sizes, 1/2" through 2"
"*Sizes 1/4" to 2" mel,
SPECIFICATIONS -MSS-SP-80
-ASME 616.18
FEATURES
-Integral Seats have opening equal to nominal pipe size of valve
eHigh-Tensile bronze Alloy Stems
Fig. 150 Fig. 151
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3
A (Fig.l50) 21/8 21/4 21/2 3 39/16 41/8 45/8 53/4 65/8 81/2
A(fig.1823) 33/4 4 7{16 415/16 51(2 6 71/4
B(FigJ51) 11/16 11/8 11/4 11/2 13/4 21/16 25/16 27/8 31/4 41/4
C 13/16 1 11/16 11/8 13{16 13/8
O· .629 .879 1.130 1.380 1.630 2.130
G 43/16 43/16 413/16 57/16 61/8 613/16 711/32 81/8 91/2 1013/16
H 21/2 21/2 23/4 3 31/4 35/8 41/16 45/8 511/16 63/8
"Tolerance per ASME 816.18 Fig. 1823
WEIGHTS (Pounds)
Fig. 150 0.8 0.9
Fig. 151 0.8 0.9
Fig.1823
28.4 29
,HE WM. POWEll. COMPANY -SINCE 1$46
1.3 1.3 1.4
2.1 2.1 2.3
3.4 3.3 3.3
5.1 4.9 4.6
6.6 6.8 6.4
10.5 11.8 10.9
18.6 19
11
BRONZE REGRINDING GLOBE and GLOBE NEEDLE VALVES "MODEL STAR"
Fig. 110 Globe, Threaded Sizes, 1/4n through 3ft
Fig. 180
Globe Needle, Threaded Sizes, 1/4" through 1"
CLASS 200 UNION BONNET THREADED ENDS
PRESSUREnEMPERATURERATINGS 200 psi Steam at 550°F
400 psi Non-Shock Cold water, Oil or Gas MATERIALS
DESCRIPTIONS MATERIAL
Handwheel Nut Brass
Identification Plate Aluminum
Handwheel Maiteable Iron
Stem Silicon Bronze
Packing Nut •• Bronze
Packing Gland Brass
Packing Graphite Non-Asbestos Commercial
Bonnet Bronze
Bonnet Ring Bronze
Disc Locknut'" SWcon 8ronze
Horseshoe Ring'" Stainless Steel
Disc'**- Bronze
Body Bronze
Seat Ring- Silicon Bronze ASTM Spec.
Commercial Commercial A-47 Gr. 32510 8-371 C69400 6-62
8-16
8-61 8-61
8-371 C69400 A-582. Type 303 8-61
8-61
8-371 C69400
- Fig. 180 1/2" to 1" size
-. Silicon 8rom:e 8-371 C69400 Sizes 1/4" to 1" incl.
••• Sizes 1/4" to 2" incl .
•••• Sizes 1/4' - 1 1/4" incl. Silicon Bronze B-371 C69400
SPECIFICATIONS -MSS-SP-80
FEATURES
-Plug type Discs are held by a locknut (Fig. 110)
-Disc and Stem are one piece in Needle valves
(Fig. 180)
-Integral Seats have openings equal to nominal pipe size of the valve
·Needle valves have renewable Seat Rings (in Sizes 1/2" to 1 ")
-High-Tensile Bronze Alloy Stems
-Valves can be reground without being removed
from the line
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2 2112 3
A(Fig.110) 21/8 21/4 21/2 3 39/16 41/8 45/8 53/4 61/2 7l/4
A(Fig.180) 2 21/8 21/2 3 39/16
G(FigJ10) 41132 41/32 411/16 59J16 67/32 625/32 723/32 83/4 97/16 10 3/4
G(Flg.180) 313/16 313{16 45/8 51/2 65/32
H 21/2 21/2 23/4 31/4 35/8 41/16 43/4 511/16 511/16 63/8
Diameter of Orifice
(Fig.l80) 1/8 3/16 1/4 3/8 1/2
Fig, 110 Fig. 180
WEIGHTS (Pounds)
Fig,110 0.9 0.9 1.3 2.2 3.4 4.9 7.7 12.3 16.3 24.1
FigJ80 0,9 0.9 1.3 2.1 3.3 THE WM. POWEll COMPANY -SINCE 1 B46
12
BRONZE REGRINDING GLOBE VALVES "MODEL STARn
Fig. 120 Globe, Threaded Sizes, 1/4" through 3"
Fig. 120TD
Soft Seat (1) Sizes, 1/4" through 3"
(1) Recommended Maximum Temperature For PTFE Seat is 450"F
CLASS 300 UNION BONNET THREADED ENDS
PRESSUR~MPERATURERATINGS 300 psi Steam at 550°F
1/4" - 2" 1000 psi Non-Shock Cold Water, Oil or Gas
2 1/2" & 3" 600 psi Non-Shock Cold Water, Oil or Gas
MATERJALS
DESCRIPTIONS MATERIAL ASTM Spec.
Handwheel Nut Brass Commercial
Identification Plate Aluminum Commercial
Handwheel Malleable Iron A-47 Gr. 32510
Stem Silicon Bronze B-371 C69400
Packing Nut "* Bronze B-62
Packing Gland Brass B-16
Packing Graphite Non-Asbestos Commercial
Bonnet Bronze B-61
Bonnet Ring Bronze B-61
Disc Locknut" Silicon Bronze B-371 C69400
Horseshoe Ring* Stainless Steel A-582, Type 303
Disc** Bronze B-61
Body Bronze B-61
Disc Insert **'" PTFE Commercial "* Sizes 1/4" to 2" incl.
"** Sizes 1/4" to 1" Silicon Bronze B-371 C69400 m Fig. 120TD
SPECIFICATIONS -MSS-SP-80
FEATURES
-Plug type Discs are held by a locknut
-High-Tensile Bronze Alloy Stems
·Valves can be reground without being removed from the line
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2112 3
A 2 114 2 3/8 2 5f8 31/4 313/16 43/8 4718 6 7 77/8
G 41/32 41/32 4 5/8 51/2 67/32 63/4 723/32 811/16 107/8 121/8
H 21/2 21/2 2 3/4 31/4 3518 41/16 4 3/4 511/16 8 9 Fig. 120
WEIGHTS (Pounds) Fig.120 0.9 1
13.9 22.5 36.3
THE WM. POWELL COMPANY-SINCE 1846
1.5 2.7 3.9 5.7 8.8
13
SPECIFICATIONS
·MSS-SP-80
DIMENSIONS (Inches) Fig. 102
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3
A 21/8 21/4 21/2 3 39/16 41/8 45/8 53/4 65{8 81/2
G 41/32 41/32 45/8 51/2 65/32 611/16 721/32 85/8 91/2 107/8
H 21/2 21/2 23/4 31/4 35/8 41/16 43/4 5 11/16 511/16 63J8
DIMENSIONS (Inches) Fig. 1202
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3
A 21/4 23/8 25/8 31/4 313/16 43/8 47/8 6 71/2 83/4
G 41/32 41/32 45/8 51/2 57/8 63/4 723/32 823/32 1011/16 121116
H 21/2 21/2 23/4 31/4 35/8 41/16 43/4 511/16 8 9
Fig. 102
Fig. 1202 WEIGHTS (Pounds)
Fig.102 0.9 1 1.4 2.3 3.4 5 7.9 12.6 20.2 30.3
Fig.1202 1.1 1.1 1.5 2.5 4.1 5.8 8.9 14.4 26.5 42 BRONZE GLOBE VALVES "WHITE STAR"
Fig. 102
Class 200 Globe, Threaded Sizes, 1/4" through 3"
Fig 1202
Class 300 Globe, Threaded Sizes, 1/4" through 3"
THE WM. POWELL COMPANY -SINCE 184!3
CLASS 200 and 300 UNION BONNET
RENEWABLE SEAT and DISC THREADED ENDS
PRESSUREITEMPERATURERATINGS Class 200 Fig. 102
200 psi Steam at 550°F
400 psi Non-Shock Cold Water Oil or Gas
Class 300 Fig. 1202
300 psi Steam at 550°F
1/4" - 2" 1000 psi Non-Shock Cold Water, Oil or Gas
2 1/2" & 3" 600 psi Non-Shock Cold Water, Oil or Gas
MATERIALS
DESCRIPTIONS MATERIAL ASTM Spec.
Handwheel Nut Brass Commercial
Identification Plate Aluminum Commercial
Handwheel Malleable Iron A-47 Gr. 32510
Stem Silicon Bronze B-371 C69400
Packing Nut ." Bronze B-62
Packing Gland Brass B-16
Packing Graphite Non-Asbestos Commercial
Bonnet Bronze B-61
Bonnet Ring Bronze B-61
Disc Locknut=" Silicon Bronze B-371 C69400
Horseshoe Ring"· Stainless Steel A-582, Type 303
Disc· Bronze B-61
Seat Ring Bronze 8-61
Body Bronze B-61
,. Sizes 1/4" to 1 1/4" incl. Silicon Bronze B-371 C69400
... Sizes 1/4" to 1" incl. Silicon Bronze B·371 C69400
d* Sizes 1/4" to 2" incl. 14
BRONZE GLOBE VALVES
"WHITE STAR"
Fig. 2872
Silver Braze Ends Sizes, 1/4" through 2"
CLASS 200
UNION BONNET RENEWABLE SEAT and DISC SILVER BRAZE TUBING ENDS
PRESSURE/TEMPERATURE RATINGS 200 psi Steam at 550°F
400 psi Non-ShocK Cold Water, Oil or Gas
MATERIALS
DESCRIPTION
MATERIAL
ASTMSpec.
Handwheel Nut Identification Plate Handwheel
Stem
Packing Nut" Packing Gland Packing Bonnet Bonnet Ring
Disc Locknut t" " Horseshoe Ring"" " Disc ....
Seat RinQ
Brass Aluminum Malleable Iron Silicon Bronze Bronze
Brass
Graphite Non-Asbestos Bronze
Bronze
Silicon Bronze Stainless Steel Bronze
Bronze
Commercial Commercial A-47Gr.32510 B-37~ C69400 B-62
B-16 Commercial 8-61
B-61
8-371 C69400 A-582, Type 303 B-61
B-61
Sizes 1/4" to 1" incl. Silicon Bronze B-371 C69400
•• Sizes 1/4" to 1 1/4" incl. Silicon Bronze 8-371 C69400 •• Sizes 1/4" to 2" incl.
SPECIFICATIONS -MSS SP-80 ·MSS SP-73
FEATURES
=Renewable Plug type Discs are held by a locknut =Renewable Screwed-in Seat Rings
·High-TensHe Bronze Alloy Stems
Fig. 2872
THE WM. POWELL COMPANY -SINCE 1846
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2
A 21/2 3 31/4 33/4 41/4 5 51/4 61/2
C 17/64 5/16 3/8 13/32 7/16 1/2 5/8 21/32
D* .379 .504 .629 .879 1.130 1.380 1.630 2.130
G 41/32 41/32 45/8 515/32 65/32 611/16 721/32 8518
H 21/2 21/2 23/4 31/4 35/8 41/16 43/4 511/16
"Tolerance per ASME B16.18 WEIGHTS (Pounds)
Flg.2872 0.9 1.1
1.4
2.4
3,5
5.3
7.6
12
15
BRONZE {FULL FLOW} GLOBE VALVES
"W.S."
Fig. 2600 Globe threaded Sizes 1/4 through 2"
CLASS 150
UNION BONNET RENEWABLE STAINLESS STEEL SEAT and DISC THREADED ENDS
PRESSUR8TEMPERATURERA~NGS 150 psi Steam at 406°F
300 psi Non-shock cold water, Oil or Gas
MATERIALS DESCRIPTION
MATERIAL
ASTM Spec.
Handwheel Nut Identification Plate Handwheel
Stem
Packing Nut* Packing Gland Packing
Bonnet
Bonnet Ring
Disc Locknut Horseshoe Ring Disc
Seat Ring Body
Brass Aluminum Malleable Iron Silicon Bronze Bronze
Brass
Graphite Non-Asbestos Bronze
Bronze
Silicon Bronze Stainless Steel Stainless Steel Stainless Steel Bronze
"Sizes 1/4" to 1" incl. Brass ASTM B-16
Commercial Commercial A-47 Gr.32510 B-371 C69400 B-62
B-16 Commercia! B-62
B-62
8-371 C69400 A-582, Type 303 A-582, Type 416 A-582, Type 416 8-62
SPECIFICA~ONS -MSS SP-80
FEATURES
=Renewable Plug Type Stainless Steel Disc =Renewable Stainless Steel seat has full nominal
pipe size opening
-High-Tensile Bronze Alloy Stems
-Differential hardness between seat and disc to
prevent galling
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2
A 21/8 21/4 21/2 3 39/16 41/8 45/8 53/4
G 41/32 41/32 419/32 51/8 513/16 e 1/2 75/32 81/16
H 21/2 21/2 23/4 3 31/4 35/8 41/16 43/4
WEIGHTS (Pounds)
Fig.2600 0.9 0.9 1.3 2 3.3 4.9 6.5 11
Fig. 2600 THEWM. PQWELLCOI\1PANY-$INCE 1846
16
BRONZE (FULL FLOW) GLOBE VALVES
"W.S."
Fig. 2608
Class 200 Globe, Threaded Sizes, 1/4" through 3"
Fig. 2612
Class 300 Globe, Threaded Sizes, 1/4" through 3"
CLASS 200 and 300
UNION BONNET RENEWABLE STAINLESS STEEL SEAT and DISC THREADED ENDS
PRESSUREnEMPERATURERAnNGS Class 200 Fig. 2608
200 psi Steam at 5500F
400 psi Non-Shock Cold water, Oil or Gas
Class 300 Fig. 2612
300 psi Steam al 550~F
1/4"-2" 1000 psi Non-Shock Cold Water, Oil or Gas 21/2"-3" 600 psi Non-Shock Cold Water, Oil or Gas
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec.
Handwheel Brass
Identification Plate Aluminum
Handwheel Malleable Iron
Stem Silicon Bronze
Packing Nut· Bronze
Packing Gland Brass
Packing Graphite Non-Asbestos
Bonnet Bronze
Bonnet Ring Bronze
Disc Locknut?" Silicon Bronze
Horse Shoe Ring"· Stainless Steel
Disc Stainless Steel
Seat Ring Stainless Steel
Body Bronze
Stud"" Steel
Stud Nut"" Brass
Gasket"" Compressed Non-Asbestos
• Brass ASTM B-16 for 1/4" through 1" valves •• 2 1/2" and 3" valves have bolted bonnets
••• Sizes 1/4 H to 2" incL
Commercial Commercial A-47 Gr. 32510 B-371 C69400 B-62
B-16 Commercial B-61
8-61
8-371 C69400 A582, Type 303 A582, Type 416 A582, Type 416 8-61
A-193, Grade B7 Commercial Commercial
SPECIFICATIONS eMSSSP-80
FEATURES
·Renewable Plug Type Stainless Steel Disc ·Renewable Stainless Steel seat has full nominal
pipe size opening
-Hlqh-Tensile Bronze Alloy Stems
·Differential hardness between seat and disc to prevent galling
DIMENSIONS (Inches) Fig. 2608
Size 1/4 3/8 1/2 3/4
11/4
1 1/2
2 21/2
3
A 21{8 2 1/4 2 1/2 3
G 41/32 4 1/32 45/8 5 1/2
H 2 1/2 2 1/2 2 3/4 3 1/4
39/16 65/32 35/8
41/8 611/16 41/16
53/4 65/8
85/8 1013/16
511/16 7
81/2 1115{16 8
DIMENSIONS (Inches) Fig. 2612
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3
A 21/4 23/8 25/8 31/4 313/16 43/8 47/8 6 71/4 83/4
G 41/32 41/32 45/8 51/2 67/32 63/4 723/32 811/16 111/4 131/8
H 21/2 21/2 23/4 31/4 35/8 41/16 43/4 511/16 8 9
Fig. 2608
Fig. 2612
WEIGHTS (Pounds)
Fig.2608 0.9 0.9 1.4 2.4 3.3 4.9 7.7 12.4 26.6 36.6
Fig.2612 0.9 1.1 1.4 2.4 4 5.7 8.7 14.4 37.7 58.5 THE WM. POWELL COMPANY -SINCE 1&16
45/8 721/32 43/4
17
BRONZE SWING CHECK VALVES
Fig. 578 Threaded Sizes, 1'4" through 3" Fig.S78TD
Soft seat Sizes, 1'4" through 3"
Fig. 1825 Solder Joint Sizes, 1'2" through 3" Fig. 1825TD
Soft seat Sizes, 1/2" through 3"
CLASS 125 SCREWED-IN CAP
THREADED and SOLDER JOINT TUBING ENDS
PRESSUREnEMPERATURERATINGS 125 psi Steam t at 406°F
200 psi Non-Shock Cold Water, Oil or Gas
t This pressure rating applies to the solder joint end valve bodies. Solder joint valves should NOT be used in services where the temperature of the fluid being handled is higher than the point at which the solder begins to soften.
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec.
DIMENSIONS (Inches)
Side Plug Cap"
Body
Carrier Pin Carrier Disc"
Disc Nut Disc Insert **
Brass Bronze Bronze Brass Bronze Bronze Brass PTFE
B-16
B-62
B-62
B-16
B-62
B-62 Commercial Commercial
" Brass ASTM B-16 Sizes 114" to 1" incf. "* Fig. 578TO and Fig.1825TO
SPECIFICATIONS ·MSSSP-80 ·ASME 816.18
Size 1/4 3/8
FEAlURES 'Renewable Discs ·Integral Seats
.50 Angle Seat for quick response to low pressure differential ·Valves can be used in horizontal or vertical postion; however,
when installed in vertical line, flow must be upward with pressure under the disc
1/2
A(Fig.578) 1 7/8 21/4 A 1 (Fig.1825)-
S
C·
G 1 3/16 1 5/16
23/4 31/8 13/16 .629 17/16
"Tolerance per ASME B16.18
WEIGHTS (Pounds) Fig.57S 0.4 0.5 Fig.1825 -
0.7 1.0
1.0 1.5
18
3/4
11/4
11/2
Fig. 578
Fig. 1825
THE WM. POWELL COMPANY-SINCE 1846
2
21/2 3
27/8
4
1
.879 111/16
31/4 4318 11{16 1.130 21/16
33/4 47/8 11/8 1.380 21/2
51/4 61/8 13/8 2.130 35/16
61/4 71/4
71/4 83/8
1 5/S 1 7/S
2.633 3.133
3 15/16 315/16
41/4 51{8 13/16 1.630 213/16
1.6 1.5
2.3 2.1
3.0 3.1
6.0 5.0
9.0 8.6
13.0 13.6
BRONZE "Y" SWING CHECK VALVES
Fig.S60
Class 200 Sizes 1/4" through 3" Fig. 560TD
Soft Seat (1) Sizes 1/4" through 3"
Fig. 563
Class 300
Sizes 1 W through 3" (1) Recommended Maximum Temperature for PTFE Seat is 4500F
CLASS 200 and 300 SCREWED· IN CAP THREADED ENDS
PRESSUREnEMPERATURERATINGS Class 200 Fig. 560
200 psi Steam at 550°F
400 psi Non-Shock Cold Water, Oil or Gas Class 300 Fig. 563
300 psi Steam at 550°F
600 psi Non-Shock Cold Water, Oil or Gas
MATERIALS
DESCRIPTION MATERIAL ASTM Spec.
Side Plug Brass B-16
Cap' Bronze B-61
Body Bronze 8-61
Carrier Pin 8rass B·16
Carrier •• Bronze B·62
Disc ••• Bronze 8·61
Disc Nut Brass Commercial
Disc Insert •••• PTFE Commercial Brass ASTM B-16 Sizes 1/4" to 3/4" incl.
Brass ASTM 8-124 Alloy C37700 Sizes 1/4" to 1" incl. Silicon Bronze B-371 C69400 Sizes 1/4" to 1" incl. Fig. 560TO
SPECIFlCATlONS -MSS SP-80
FEATURES
=Renewable Disc is held by a locknut -Integral Seats
-By unscrewing the side plug and removing the cap
and carrier pin, the carrier and disc assembly can be easily removed
-vaives can be used in horizontal or vertical position: however, when installed in vertical line, flow must be upward with pressure under the disc
DIMENSIONS (Inches) Fig. 560
11/4 11/2
21/2 3
Size 1/4 3/8 1/2 3/4 1
A 21/4 2 3/8 2 3/4 3 1/8 3 5/8
G 13/8 13/8 111/16 2 2318
2
43/8 5
3 31/2
61/8 41/4
71/4 81/2
51/16 57/8
DIMENSIONS (Inches) Fig. 563
Size 1/4 3/B 1/2 3/4 1 11/4 11/2 2 21/2 3
A 23/8 21/2 27/8 31/4 33/4 41/2 51/8 63/8 71/2 83/4
G 11/2 11/2 11 3/16 21/8 21/2 31/8 39/16 43/8 53/16 6
Fig. 560
Fig. 563
WEIGHTS (Pounds)
Fig.S60 0.6 0.6 0.8 1.3 2 3.4 4.8 8 13.7 20.3
Fig.SS3 0.7 0.7 1 1.6 2.3 4.1 5.9 10.3 17 25.3 THE WM. POWELL COMPANY-SINCE' 646
19
BRONZE LIFT CHECK VALVES
"MODEL STAR"
Fig. 116TD (1) Soft Seat
Class 200 Threaded Sizes, 1/4" through 2"
(1) Recommended Maximum temperature for PTFE Seat is 4500F
CLASS 200 UNION CAP THREADED ENDS
PRESSUR~MPERATURERATINGS 200 psi Steam at 550°F
400 psi Non-Shock Cold Water, Oil or Gas
MATERIALS
DESCRIPTION MATERIAL ASTM Spec.
Disc Guide Silicon 8ronze 8-371 C69400
1/4" - 11/4"
11/2" - 2" Bronze 8-61
Ring Nut Bronze 8-61
Disc Holder Silicon 8ronze B-371 C69400
Body Bronze B-61
Disc Insert PTFE Commercial
Disc Plate Silicon Bronze B-371 C69400
Disc Nut Brass Commercial FEATURES
·Renewable Plug type Discs
·Spindle Guide on top of the disc is guided by a collar which is held in position by the union cap. Guide collar is self centering by a bevel joint in the neck end of the body.
·Integral Seats have an opening equal to the nominal pipe size of the valve
·Valves should be installed with pressure under the disc
DIMENSIONS (Inches)
Size 1/4 3/8
A 21/8 21/4
G 113/32 113/32
1/2
3/4
11/4
11/2
2
21/2 11/2
3 113/16
39/16 21/16
41/8 23/8
45/8 227/32
53/4 323/32
WEIGHTS (Pounds)
Fig.116TO 0.6 0.6
THEWM. POWELLCOMPANY-$INCE 1846
0.9
1.6
3.8
2.4
4.4
9.7
20
IRON CLIP GATE VALVES
Fig. 3460
Bronze Trimmed
Fig. 3462 All Iron, Threaded Sizes,1W Through 4"
DIMENSIONS
Size FACE H D WTlbs
TO
FACE
1/4'-1/2' 2.09 5 21/8 1.5
3/4' 2.36 6.22 27/16 2
r 2.59 7.5 261/64 3
11/4' 2.88 9 261/64 5
11/2' 3.14 9.14 33/4 6.5
2' 3.70 11.58 35/32 10
21/2' 4.17 12.88 449/64 16
3' 4.56 14.77 6 24
4' 5.67 19.3 9 48
End Threaded to ASME B1.20.1 CLASS 150
INSIDE SCREW RISING STEM THREADED ENDS
PRESSUREnEMPERATURERATINGS
1/4« to 2" 150 psi Steam
225 psi Non-Shock Cold Water, Oil or Gas
2 1/2" to 4" 120 psi Steam
175 psi Non-Shock Cold Water, Oil or Gas
MATERIALS
DESCRIPTION MATERIAL ASTM
Sec.
Body 1/4" to 1" Ductile Iron A536
1 1/4"-4" Cast Iron A126-8
Bonnet 1/4" to 112" Ductile Iron A536
3/4" - 4" Cast Iron A126-B
Disc 1/4" to 1" Ductile Iron A536
1 1/4" - 4" Cast Iron A126-B
Stem Stainless Steel Type 410
Packing Graphite Non-Asbestos THEWM. POWEllCQMPANY-$INCe 1846
21
IRON BODY BRONZE TRIMMED GATE VALVES
Fig. 1187
Flanged, Bronze Trimmed - Sizes, 2" ~ 24"
CLASS 125
INSIDE SCREW NON-RISING STEM BOLTED FLANGED BONNET FLANGED ENDS
PRESSUREnEMPERATURERATINGS 2" to 12" 125 psi Steam at 450°F
200 psi Non-Shock Cold Water, OJ) or Gas 14" to 24" 100 psi Steam at 350°F
150 psi Non-Shock Cold Water, Oil or Gas
MATERIALS DESCRIPTION
MATERIAL
ASTM Spec.
1
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Handwheel Nut Handwheel Stem
Packing Gland Nut Packing Gland Follower Packing Gland Stud Packing Gland
Stuffing Box
Packing
Stuffing Box Gasket Bonnet
Bonnet Bolt
Bonnet Gasket Bonnet Bolt Nut Disc Nut
Body Seat Ring Disc Seat Ring Disc
Body
Steel
Cast Iron Brass
Steel Ductile Iron Steel
Cast Bronze Cast Iron
Non-Asbestos Braided Fiber
Non-Asbestos Cast Iron Steel Non-Asbestos Steel
Cast Bronze Cast Bronze Cast Bronze Cast Iron Cast Iron
A-307 A-126-B B-16 A-307 A-536 A-307 8-62 A-126-8
A-126-B A-30?
A-307 8-62 B-62 8-62 A-126-B A-126-8
FEATURES SPECIFICATIONS
·Solid Wedges =Conforms to MSS SP-70 Type 1
·Renewable Seat Rings in Bronze
Trimmed valves
-Body has five Tapping Bosses
DIMENSIONS (Inches)
Size 2 21/2 3 4 5 6 8 10 12 14 16 18 20 24
A 7 71/2 8 9 10 101/2 111/2 13 14 15 16 17 18 20
B 1215/16 131/4 15 17314 203/16 231/8 273/4 3215/16 373/8 413/8 467/8 497/8 543/8 641/4
C 7 7 8 10 12 12 14 16 18 20 22 24 24 30
0 6 7 71/2 9 10 11 131/2 16 19 21 231/2 25 271f2 32
E 5/8 11/16 314 15/16 15/16 11/8 13116 11/4 13/8 17/16 19/16 111/16 17/8
WEIGHTS (Pounds)
Fig.Ha7
33 44 55 95 132 172 271 381 578 600 1165 1462 1801 2600 THE WM. POWEll COMPANY -SINCE 1 S48
22
IRON BODY BRONZE TRIMMED and ALL IRON GATE VALVES
Fig. 1793 Flanged, Bronze Trimmed Fig. 1816 Flanged, AU Iron Sizes, 2"-36"
FEATURES -Solid Wedges
=Renewabie Seat Rings in Bronze Trimmed valves. Integral seats in AU Iron Valves
-Body has five Tapping Bosses
CLASS 125
OUTSIDE SCREW RISING STEM BOLTED FLANGED YOKE-BONNET FLANGED ENDS
PRESSUREnEMPERATURERA~NGS
2" to 12" 125 psi Steam at 450°F
200 psi Non-Shock Cold Water, Oil or Gas
14" to 24" 1 00 psi Steam at 350°F
150 psi Non-Shock Cold Water, Oil or Gas
30" & 36" 150 psi Non-Shock Cold Water, Oil or Gas
MATERIALS
DESCRIPTION MATERIAL ASTMSpec.
1 Handwheel Nut Ductile Iron Cast Iron A-S36
2 Handwheel Cast Iron A-126-B
3 Yoke Bushing Nut Cast Iron A-126-B
4 Yoke Busing Cast Bronze B-62
S Stem Brass B-16
6 Yoke Cast Iron A-126-S
7 Yoke Bolt Steel A-307-S
8 Yoke Bolt Nut Steel A-307-B
9 Packing Gland Nut Steel A-307-S
10 Packing Gland Flange Ductile iron A-536
11 Packing Gland Stud Steel A-307-S
12 Packing Gland Cast Bronze 8-62
13 Packing Non-Asbestos Sraided Fiber
14 Backseat Bushing Cast Bronze 8-62
15 Bonnet Cast Iron A-126-8
16 Bonnet Bolt Steel A-307-B
17 Bonnet Bolt Nut Steel A-307-B
18 Bonnet Gasket Non-Asbestos
19 Body Cast Iron A-126-B
20 Disc Cast Iron A-126-B
21 Body Seat Ring Cast Bronze B-62
22 Disc Seat Ring Cast Bronze 8-62 SPECIFICA~ONS
-Conforms to MSS SP-70 Type 1
DIMENSIONS (Inches)
Size 2 21/2 3 4 5 6 8 10 12 14 16 18 20 24 30 36
A 7 71/2 8 9 10 101/2 111/2 13 14 15 16 17 18 20 24 28
B 1423/32 1621/32 1855/64 237/16 2723/32 321/4 39 29/64 48 5/32 56 1116 627/16 711{16 79 871/8 100 1/16 135 160
C 7 7 8 10 12 12 14 16 18 20 22 24 24 3{) 36 46
0 6 7 71/2 9 10 11 131/2 16 19 21 231{2 25 271/2 32 38314 46
E 5/8 11/16 3/4 15/16 15/16 11/8 13116 11/4 13/8 17116 19/16 111/16 1718 21/8 23/8
WEIGHTS (Pounds)
Fig. 1793 36 48 62 108 145 100 294 400 618 8&l 1166 1467 1824 2618 4800 8700
Fig. 1816 36 48 60 103 143 100 ze 441 628 8&l 1166 1467 1824 2618 4800 8700 THE WM. POWELL COMPANY-SINCE 1846
23
IRON BODY BRONZE TRIMMED GATE VALVES
Fig. 1797 Flanged, Bronze Trimmed Sizes, 2~-12n
FEATIJRES ·Solid Wedges
·Renewable Seat Rings in Bronze Trimmed valves
·Body has five Tapping Bosses
CLASS 250
OUTSIDE SCREW RISING STEM
BOLTED FLANGED YOKE-BONNET
FLANGED ENDS
PRESSUREnEMPERATURERATINGS
2" to 12" 250 psi Steam at 4500F
500 psi Non-Shock Cold Water, Oil or Gas
MATERIALS
DESCRIPTION MATERIAL ASTM Spec.
1 Handwheel Nut Ductile Iron A-536
2 Handwheel Cast Iron A-126-B
3 Yoke Bushing Nut Cast Iron A-126-B
4 Yoke Busing Cast Bronze B-62
5 Stem Brass B-16
6 Yoke Cast Iron A-126-B
7 Yoke Bolt Steel A-307
8 Yoke Bolt Nut Steel A-301
9 Packing Gland Nut Steel A-307
10 Packing Gland Flange Ductile Iron A-536
11 Packing Gland Stud Steel A-301
12 Packing Gland Cast Bronze B-62
13 Packing Non-Asbestos Braided Fiber
14 Backseat Bushing Cast Bronze B-62
15 Bonnet Cast Iron A-126-B
16 Bonnet Bolt Steel A-3D7
11 Bonnet Bolt Nut Steel A-301
18 Bonnet Gasket Non-Asbestos
19 Body Cast Iron A-126-B
20 Disc Cast Iron A-126-B
21 Body Seat Ring Cast Bronze B-62
22 Disc Seat Ring Cast Bronze B-62
SPECIFICATIONS
·WWN-58 Class 2, Type 1 & MSS SP-70 DIMENSIONS (Inches)
Size 2 21/2 3 4 5 6 8 10 12
A 81/2 91/2 111/8 12 15 157/8 161/2 18 193/4
B 151/2 171/16 193/8 235/8 27518 323/16 409/16 493164 5625132
C 7 8 10 12 12 14 16 18 20
0 61/2 71/2 81/4 10 11 121/2 15 171/2 201/2
E 7/8 1 11/8 11/4 13/8 17/16 15/8 17/8 2 WEIGHTS (Pounds)
Fig. 1797 53 70
102
THE WM. POWELL COMPANY-SINCE 1646
157
198
259
451
649
913
24
3% NICKEL CAST IRON GATE VALVE
Fig. 1893 • Flanged Separable Yokearms Sizes, 2" through 24"
FEATURES
-These valves are recommended for causticizing, lime recovery, sulphate pulp preparation, paper mill recovery and general process applications
-Solid Wedges
CLASS 125
OUTSIDE SCREW RISING STEM BOLTED FLANGED YOKE-BONNET FLANGED ENDS
PRESSUR87EMPERATURERA~NGS
2" to 12" 125 psi Steam at 450°F
200 psi Non-Shock Cold Water, Oil or Gas
14" to 24" 100 psi Steam at 350°F
150 psi Non-Shock Cold Water, Oil or Gas
MATERIAlS
DESCRIPTION MATERIAL ASTMSpec.
1 Handvmee\ Nut Ductile Iron Cast Iron A·5Se
2 Handwheel Cast Iron A·126·B
3 Yoke Bushing Nut Cast Iron A·12$.B
4 Yoke 6using Cast Bronze 6·62
5 Stem Stainless Steel A·182 Gr.F·316
6 Yoke Cast Iron A·126·B
7 Yoke Bolt Steel A·307·6
8 Yoke Bolt Nut Steel A·307·B
9 Packing Gland Nut Steel A·307·8
10 Packing Gland Flange Ductile iron A·536
11 Packing Gland Stud Steel A·307·S
12 Packing Gland Cast Bronze B·62
13 Packing Non-Asbestos
14 Backseat Bushing Stainless Steel A·182 Gr. F·316
15 Bonnet Cast Iron Ni 3% Nickel
16 Bonnet Bolt Steel A·307·B
17 Bonnet Bolt Nut Steel A·307·B
18 Sonnet Gasket Non-Asbestos
19 Body Cast Iron Ni 3% Nickel
20 Disc 2",3" Stainless Steel A·182 Gr F·316
"4" and Larger Cast Iron Ni 3% Nickel
21 Sody Seat Ring Stainless Steel A·182 Gr. F·316
22 Disc Seat Ring Stainless Steel A·182 GL F-316
*Nickel Iron Disc with Stainless Steel Facing
SPECIFICA~ONS
·WW-V-5S Class 2, Type 1 & MSS SP-70 DIMENSIONS (Inches)
Size 2 21/2 3 4 5 6 8 10 12 14 16 18 20 24
A 7 71/2 8 9 10 101/2 111/2 13 14 15 16 17 18 20
B 1423/32 1621/32 1855/64 237/162723/32 321/4 3929/64 485/32 561/16 627/16711/16 79 871/8 1001{16
C 7 7 8 10 12 12 14 16 18 20 22 24 24 30
0 6 7 71/2 9 10 11 131/2 16 19 21 231/2 25 271/2 32
E 5/8 11/16 3/4 15/16 15/16 1 11/8 13/16 11/4 13/8 17/16 1 9/16 111/16 1 7/8 WEIGHTS (Pounds) Fig. 1893
36 48 60
103
143
THE WM. POWl:LL COMPANY -SINCE 1 B46
186
298
441
628 880 1166 1467 1824 2618
25
IRON BODY BRONZE TRIMMED GLOBE VALVES
Fig. 241 Globe, Flanged Bronze Trimmed Sizes, 2"through 12"
FEATURES
=Renewable Seat and Disc
CLASS 125
OUTSIDE SCREW STEM
BOLTED FLANGED YOKE-BONNET FLANGED ENDS
PRESSURErrEMPERATURE RATINGS
2" to 12" 125 psi Steam at 4500F
200 psi Non-Shock Cold Water, Oil or Gas
MATERIALS DESCRIPTION
MATERIAL ASTM Spec.
1 Handwheel Nut
2 Handwheel
3 Yoke Bushing
4 Bonnet
5 Stem
6 Packing Gland Nut
? Packing Gland Follower
8 Packing Gland
9 Packing Gland Stud 10 Packing
11 Bonnet Bolt
12 Body Gasket 13 Bonnet Bolt Nut 14 Swivel Nut
15 Disc *
16 80dy Seat Ring 1? Body
Steel A-30?
Cast Iron A-126-8
Cast Bronze B-62
Cast Iron A-126-B
Brass 8-16
Steel A-30?
Ductile Iron A-536
Cast Bronze 8-62
Steel A-3D?
Non-Asbestos Braided Fiber
Steel A-30?
Non-Asbestos
Steel A-30?
Cast Bronze B-62
Cast Bronze B-62
Cast Bronze B-62
Cast Iron A-126-8
*5"-12" Iron Disc with Bronze Disc Facing
26
SPECIFICATIONS
-Conforms to MSS SP-85 Type 1
-Body has five tapping Bosses
DIMENSIONS (Inches)
Size 2 21/2 3 4 5 6 8 10 12
A 8 81/2 91/2 111/2 13 14 191/2 241/2 271/2
8 1115/16 1213/16 135/8 149/16 173/4 1911/16 2211/16 27 2913116
G 7 7 8 10 12 12 14 16 18
0 6 7 7l/2 9 10 11 131/2 16 19
E 5/8 11/16 3/4 15/16 15/16 1 11/8 13/16 11/4
WEIGHTS (Pounds)
Fig. 241 36 49 57 95 139 183 378 523 700 THE WM. POWELL COMPANY - SINCE 184ll
IRON BODY BRONZE TRIMMED and ALL IRON
SWING CHECK VALVES
Fig. 559
Bronze Trimmed, Flanged Fig. 1259-Alllron, Flanged Sizes, 2"through 18n
SPECIFICATIONS
·Conforms to MSS SP·?1 Type 1 DIMENSIONS (Inches}
CLASS 125
BOLTED FLANGED CAp· FLANGED ENDS PRESSUREnEMPERATURERATINGS
2" to 12" 125 psi Steam at 450°F
200 psi Non-Shock Cold Water, Oil or Gas
14" to 18" 100 psi Steam at 3500F
150 psi Non-Shock Cold Water, Oll or Gas
MATERIALS
DESCRIPTION MATERIAL ASTMSpec
1 Cover Bolt Steel A·307-B
2 Cover Cast Iron A-126·8
3 Cover Gasket Non-Asbestos
4 Cover Bolt Nut Steel A-30?
5 Hanger Pin Brass 8-16
6 Side Plug Brass 8·16
7 Disc Cast Iron A·126-B
8 Disc Seat Ring Cast Bronze B·62
9 Body Seat Ring Cast Bronze B-62
10 Hanger Ductile Iron A-536
11 Disc Nut Steel A-307
12 Washer Sleel A-307
13 Split Pin Stainless Steel SUS 410
14 Body Cast Iron A-126-B Size 2 21/2 3
4 5
A 8 81/2 91/2
B 4 11/16 5 318 5 3/4
o 6 7 71n
E 5/8 11/16 3/4
WI. 25 36 48
111/2 13
611/16 73/4
9 10
15/16 15/16
80 113
6 8 10 12 14 16 18
14 191/2 241/2 271/2 31 36 36
81/2 103/8 1115/16 13112 151/2 165/8 195/16
11 131/2 16 19 21 231/2 25
1 11/8 13/16 11/4 13/8 17/16 19/16
152 252 416 606 794 1020 1304
CLASS 125 BOLTED CAP, FLANGED ENDS
PRESSURErTEMPERATURE RATINGS
2" to 12" 125 psi Steam at 450°F
200 psi Non·Shock Cold Water, Oil or Gas
14" to 18" 100 psi Steam at 350°F
150 psi Non-Shock Cold Water, Oil or Gas 3% NICKEL CAST IRON SWING CHECK VALVE
Fig. 559P Swing Check Valve Sizes, 2" through 18"
Dimensions and Weights Fig. 559P Same As Fig. 559
THE WM. POWEll COMPANY - SINCE 1646
MATERIALS
DESCRIPTION MATERIAL ASTMS2ec
1 Cover Bolt Stainless Steel A·276 Type 304
2 Cover Cast Iron Ni 3% Nickel
3 Cover Gasket Non·Asbestos
4 Cover Bolt Nut Stainless Steel A·582 Type 303
5 Hanger Pin Stainless Steel A·276 Type 304
6 Side Plug Stainless Steel A-276 Type 304
7 Disc* 2· ·3" Stainless Steel A-182 Gr. F316
8 Disc Seat Ring Stainless Steel A-182 Gr. 316
9 Body Seat Ring Stainless Steel A-182 Gr. 316
10 Hanger Stainless Steel A-351 Gr. CF8M
11 Disc Nut Stainless Steel A·582 Type 303
12 Washer Stainless Steel A-276 Type 304
13 Split Pin Stainless Steel A-276 Type 304
14 Body Cast Iron Ni 3% Nickel
*4" through 18" 3% Nt Iron Disc with Stainless Facing 27
CAST STEEL VALVES GENERAL INDEX
CAST STEEL BOLTED BONNET
PAGE
CAST STEEL MATERIALS· . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
MATERIALS, STANDARDS and SPECIFICATIONS· . . . . . . . . ·29
TRIM MATERIALS and RECOMMENDATIONS· . . . . . . . . . . 30,31
SEAT RINGS, WEDGES and HAMMERBlOW HANDWHEELS· 32
STANDARD PACKING ARRANGEMENT, FUGITIVE EMISSIONS
OPTIONS and LANTERN RINGS. . " . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
GATE VALVES
Class 150 Size 1" through 60"· . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-36 Class 300 Size 1" through 42". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-39 Class 600 through 2500· . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-43
GLOBE and ANGLE VALVES
Class 150 through 1500· .
........................................ 44-48
NON-RETURN VALVES
Class 300 and 600. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49, 50
SWING CHECK VALVES
Class 150 through 1500 ...
. 51-55
TILTING DISC CHECK VALVES
Class 150 through 1500. . . . . .
................. 56
CAST STEEL PRESSURE SEAL
PRESSURE SEAL DESIGN and CONSTRUCTION. GATE VALVES
. 57-59
Class 600 - 2500 . . . . . . . ; . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-62
Class 600 Venturi Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
GLOBE and ANGLE VALVES
Class 600 - 2500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-67
Class 600 - 2500 Non-Return 68-71
CHECK VALVES
Class 600 - 2500 HOrizontal, Angle, Y lift and Swing Check " . 72-75
TILTING DISC CHECK VALVES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 76
VALVES with BY-PASS " . 77,78
MOTOR OPERATED VALVES. . . . . . . " 79
ADAPTO GEAR ACTUATORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Powell Cast Steel Valves are available in standard to highly specialized designs for Nuclear Service, HF Service and NACE requirements (National Association of Corrosion Engineers).
THE WM. POWELL COMPANY - SINCE 1846
28
CAST STEEL MATERIALS
Cast Carbon Steel
Cast Chromium~Molybdenum Alloy Steel Cast Chromium~Molybdenum Alloy Steel
Cast 4-6% Chromium-Molybdenum Alloy Steel Cast 8·10% Chromium-Molybdenum Alloy Steel
Cast 8-10% Chromium-Molybdenum Vanadium Alloy Steel Cast Carbon Steel
Cast 31/2% Nickel Steel
ASTM A216, Grade WCB ASTM A217, Grade WC6 ASTM A217, Grade WC9 ASTM A217, Grade C5 ASTM A217, Grade C12 ASTM A217. Grade Ci2A ASTM A352, Grade LCB ASTM A352, Grade LC3
STANDARD and SPECIFICATIONS
In the interest of uniformity and safety for the consumer, a number of national organizations have developed and published Standards and Specifications. Tllese standards and specifications prescribe the rules and regulations for tile construcnon of boters and pressure vessels, including valves and safety appliances, specifications for materials, dimensional standards and requirements for piping system. Powell Valves and Engineering Specialties, wherever applicable, conform to the requirements set forth in tile publications (latest editions) of mese associations.
API~
American Petroleum Institute - Specifications
A.STM- A.merican Society for Testing Materials - Material Specifications
MSS- Manufactures' Standardization Society of the Valve and Fittings Industry - Standard Practices
NACE- National Association of Corrosion Engineers
ANSI- American National Standards Institute - Codes and Standards
ASME- American Society of Mechanical Engineers - Boiler and Pressure Vessel Code
CAST STEEL VALVE TEST STANDARDS
Shell and Seat Test Pressures and Test Procedures are as outlined in the following standards
BOLTED BONNET VALVES ASME B16.34
MSS SP-61
API 598
PRESSURE SEAL VALVES ASME B16.34
MSS SP-61
THE WM. POWEll COMPANY - SINCE 1846
29
POWELL TRIM MATERIALS
HF • NON·FERROUS HARD FACING ALLOY-STELLITE
Because of its hardness and ability to maintain toughness at elevated temperatures, Stellite Hard Facing Alloy is ideal and especially recommended for facing valve seats, wedges and discs used in services where high temperatures and erosion are encountered.
Powell engineers pioneered the hard facing of valve seats, wedges and discs. Careful study, scientific research and development made it possible to apply this material commercially. It is fused on and inseparably bonded to base materials.
Powell valve seats, wedges and discs hard faced give long, satisfactory service and do not require frequent or continuous lapping or refacing - advantages proved by successful Powell Valve installations everywhere.
CR .. 13 .. STAINLESS STEEL (13% Chrome)
Powell Stainless Steel, used for valve trirn,is a high chromium alloy material produced for valve seating faces and stems or spindles. This Stainless Steel is carefully heat treated for maximum wear requirements. By altering the heat treatment a variation in the hardness of Stainless Steel seat and disc faces is obtained. This greatly minimizes the seizing and galling action between the seats and discs.
NI .. CU .. NICKEL COPPER ALLOY·MONEL
316 SS .. HIGH CHROMIUM·NICKEL .. MOLYBDENUM STEEL NACE .. HYDROGEN SULFIDE SERVICE
Special trims are available for resistance to sulfide stress cracking in valves subjected to hydrogen sulfide per NACE MR0175 standards.
OTHER TRIMS
Other trim combinations are available for specific applications.
THE WM. POWEll COMPANY - SINCE 1646
30
VALVE TRIM RECOMMENDATIONS
SERVICE - STEAM AND WATER UP TO 850°F.
Gate, Globe, Angle and Check Valves - Wedge or Disc Facing: 13% Chrome Stainless Steel Seat Ring Facing: Stel1ite
API Trim 8
SERVICE - STEAM AND WATER UP TO 1200°F
Gate, Globe, Angle and Check Valves - Wedge or Disc Facing: Stellite Seat Ring Facing: Stellite
API Trim 5
SERVICE - OIL OR OIL VAPOR UP TO 11 OO°F.
Gate, Globe, Angle and Check Valves - Wedge or Disc Facing: 13% Chrome Stainless Steel Seat Ring Facing: Stellite
API Trim 8
SERVICE - OIL OR OIL VAPOR OR GAS UP TO 120Q°F. Gate, Globe, Angle and Check Valves - Wedge or Disc Facing: Stetlite Seat Ring Facing: Stellite
API Trim 5
Stems in valves for above services are made of 13% Chrome Stainfess Steel.
See page 153 For More Trim Information,
BOLTING MATERIALS
For normal services, studs (threaded full length) conforming to A. S, T ,M. Specification A 193 Grade 8-7 are furnished, with nuts conforming to A. S. T. M. Specification
A 194 Class 2H,
Threads are in accordance with the American Standard for Screw Threads. ASME 81.1 Coarse Thread Series, sizes 1 inch in diameter and smaller; and 8-Pitch Thread Series, 1 1/8 inch in diameter and larger.
POWELL ALLOY STEEL STUDS (A. S. T. M. Spec. A193, Grade B-7)
POWELL STEEL NUTS
(A. S. T. M. Spec. A194, Class 2H)
THE WM. POWELL COMPANY - SINCE 1846
31
CAST STEEL VALVES
HAMMERBlOW HANDWHEEl
Powell Steel Globe, Angle and Non-Return Valves can be equipped with Hammerblow handwheel providing additional operating torque to facilitate operation of valves in srvices where the plain handwheel may be insufficient yet where gearing is not necessary. It is regularly supplied on certain large size globe. angle and non-return valves.
Welded·ln Seat Ring in Gate Valve
Welded-In Seat Ring in Globe Valve
SEAT RINGS
Seat rings are of heavy rectangular section, sterlite faced (unless otherwise specified) and seat directly against the main wall of the body casting. Gate and Swing Check Valve rings are welded into the valve body. Globe, Angle and lift Check rings are welded (most pressure seal designs) or threaded (most bolted bonnet designs). When specitied, threaded rings can be seal welded. Seat rings with PTFE inserts can be supplied on special order.
Sectional View illustrating the guiding of the wedge
THE WM. POWEll COMPANY - SINCE 1846
WEDGES FOR GATE VALVES
Gate Valve Wedges are one piece solid construction with integral guides to mate with the body guides. The wedges are precision machined and fitted.
Most wedges are flexible type with cast or saw cut groove and solid center hub. This design allows minimum operating torque for tight shut off and reduces the negative effects of thermal expansion and contraction.
32
CAST STEEL VALVES
Die Formed Flexible Graphite Ribbon Inner Rings With Corrosion Inhibitor.
Braided Carbon Yarn End Rings With Corrosion Inhibitor.
Ben&ville Washers
~A;;~- Wiper Fling f6:#':f';3"'_-Pad<!ro;J
j~~;t~::= Wiper Fling
Lantern Fling
ra"f'iIT-- Wiper fling ~~-- Pad<ing ~~,___ Wiper Fling
THE WM. POWELL COMPANY - SINCE 1846
STANDARD PACKING ARRANGEMENT
Powell standard design cast and low alloy steel valves are designed and manufactured to meet level 1·500 ppm maximum fugitive emissions. level II-100 ppm maximum emissions-is optionally available.
FUGITIVE EMISSIONS OPTIONS
PACKING DESIGN
Illustration Of Optional live Load Design with standard packing (left side of centerline) and Live Load Design with Lantern Ring Arrangement (right side of centerline)
GASKET DESIGN
Contained Controlled Compression Spiral Wound Gasket
LANTERN RINGS
Lantern Rings, when ordered in cast steel valves, can be substituted for condensing chambers. This permits sufficient packing at the bottom and top of the stuffing box.
Lantern rings are used where hazardous media passes through the valves, or where customer requests a valve for an inert gas or a steam packed valve or a method for providing lubrication at this point. They can be supplied with one bonnet connection for detection Of draining or two connections for flushing.
33
CAST STEEL GATE VALVES
Fig. 1503 Sizes, 1" and 1 1/2"
For Sizes, 2" and larger see pages 35, 36
FEATURES
-Solld Wedges are accurately
guided to the sealing surfaces -seat Rings are welded in valve body
-Male and female bonnet joint
assure alignment and com presses the gasket eliminating any possibility of a blow-out
CLASS 150
OUTSIDE SCREW RISING STEM BOLTED FLANGED YOKE-BONNET FLANGED ENDS
PRESSUREITEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec.
Stem Bushing
Stem BuStling locknut Name Plate
Handwheel
Handwheel Key Bushing Retainer Grease Fitting
Yoke
S!em
Gland Eyebolt Nut Gland Eyebolt Gland Eyebolt Pin Gland Flange Gland Follower
Aluminum Bronze Stainless Steel Aluminum Malleable Iron Steel
Steel
Steel
Steel
Stainless Steel Stainless Steel Stainless Steel Steel
Sleel
Steel
8505 Alloy 95400 A-582. Type 416 Commercial
A·47, Grade 32510 A-108, Grade 1020 AISI C-12, l-14 Commercial A-216, Grade WCB
t A-182, Grade F6a A-194, Grade B8 Commercial Commercial Commercial
A-loa, Grade 102() Commercial
A-193. Grade B7 A-194, Grade 2H Commercial
A-216, Grade WCB A-217, Grade CA1S A-312, Type 316
Packing Yoke Bol! Yoke Bolt Nut Gasket (Corrugated) Body Disc Sea! Ring t Or Equal GRAFOll® trademark of Union Carbide Corporation
Graloil Steel Steet
Stainless Steel/Graphite Coated Steel
Stainless Steel Stainless Steel
SPECIFICATIONS·
-Flanged End valves have dimensions conforming to ASME 816.5 and 816.10
-Flanged End valves can be fumished with ring joint flanges
ORDERING
-Double Wedges are available on special order and are interchangeable with the Solid Wedge
THE WM. POWELL COMPANY - SINCE 1846
DIMENSIONS (Inches)
Size 1
11/2
C 5
G 10
H 41/2
61/2 123/4 6
WEIGHTS (Pounds)
Fig. 1503 14
25
34
CAST STEEL GATE VALVES
Fig. 1503 Flanged
Fig. 1503WE • Welding Sizes, 2" through 14"
For Sizes, 16" through 60' see page 36
FEATURES
·Flexible Wedge insures pressure tightness and reduces operating torque needed to open the valve. Solid Wedges are furnished in valves sizes 2" and 2 112"
-Stellite faced Seat Rings are welded into the body. This provides a positive no-leak seal of the ring in the valve body and will resist corrosion, erosion and galling
-Bonnet permits easy installation of an actuator, adapto gearing, cylinder or motor ·Valves are furnished with a back seat bushing arrangement in the bonnet ·Valves, sizes 2· and 2 1/2" have square bonnets and nested gasket
CLASS 150
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM FLANGED and WELDING ENDS PRESSUREfTEMPERATURE RATINGS
In accordance with ASME B16.34 MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec.
Handwhee! Nut Handwhee! Hand\'lheel Key
Stem Bushing Locknut (2'-4') Bonnet
lubricant Fitting
Stem Bushing
Stem
Eyeball Nuts
Gland Flange
Gland
Groov-Pins
EyebOlts
PaCking
BOdy Nuts
Body Seat Bushing BOdy Studs
Gasket (Corrugated) BOdy
Seat Rings Wedge
Cap Screws (6' -14') Bearing Cap (6' -14')
tOt Equal
Malleable Iron Malleable Iron Steel Malleable Iron Carbon Steel
Ductile Ni-Resist Stainless Steel Steel
Steel
Steel
Steel
Steel
Grafoil
Steel
Stainless Steel Steel
Stainless Steel/Graphite Coated Carbon Steel
$teel/Stellite Facing
Stainless Steel or
Carbon Steel/13%
Chrome Facing
Sleel
Malleable Iron
A-47, Grade 32510 A-47. Grade 32510 A-lOB, Grade 101511025 A-47, Grade 32510 A-216, Grade WCB Commercial
A-439, Type 02
t A-182, Grade F6a A-563, Grade A or B A1SI1030
A-lOB, Grade 101511025 Commercial
A-307, Grade B Commercial
A-194, Grade 2H
t A-276, Type 410
A-193, Grade B7 Commercial
A-216, Grade WeB A-519, Grade 1015/1025 A-217, Grade CA15 M16, Grade WCB
A-449
A-47, Grade 32510
SPECIFICATIONS
-Planged and 8utt Welding End valves conform to ANSI B16.5, B16.10, 816.25, 816.34 and API 600
·Flanged End valves can be furnished with ring joint flanges
ORDERING
·When ordering Butt Welding End valves, specify schedule of pipe end and give complete data concerning style, figure number and contour of weld end
THE WM. POWELL COMPANY - SINCE 1846
DIMENSIONS (Inches)
Size 2 21/2 3 4 6 8 10 12 14
0 7 71/2 8 9 101/2 111/2 13 14 15
N 81/2 91/2 111/8 12 157/8 161/2 18 193/4 221/2
A 145/8 157/8 181/8 221/8 31 39 471/4 551/2 651/2
V 8 8 9 10 12 14 16 20 22
D 2.067 2.469 3.068 4.026 6.065 7.981 10.02 12.00 13.25
WEIGHTS (Pounds)
Ffg.1503 35 50 80 110 190 310 490 700 990
Fig.1503WE 30 40 70 100 180 270 450 640 1015 35
CAST STEEL GATE VALVES
Fig. 1503 Flanged
Fig. 1503WE - Welding Sizes, 16" through 60' Above 36" Data on Request
FEA11JRES
• Solid Wedge is accurately guided to the seating surfaces. Flexible wedge can be fumished when ordered.
• Stellite faced Seat Rings are welded into the body. This provides a positive no-leak seal of the ring in the valve body and will resist corrosion, erosion and galling.
• Lubricant fitting is provided to permit stem bushing lubrication for ease of operation .
• Valves are fumished with a back seat bushing arrangement in the bonnet.
CLASS 150
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM FLANGED and WELDING ENDS PRESSUREnEMPERATURERATINGS
In accordance with ASME 816.34 MATERIALS
DESCRIPTION MATERIAL ASTM S(!ec.
Handwheel Malleable Iron A-47, Grade 32510
Handwheel Key Steel A-lOa, Grade 1015/1025
Handwheel N ut Malleable iron A-47, Grade 32510
Lubricant Fitting Commercial
Stem Bushing Ouctile Ni·Resist A-439, Type D2
YOkearm Ear Bolls Sleel A-30l. Grade B
Gland Steel MOa, Grade 1015/1025
Eyebolt Nuts Steel A-563, Grade A or B
Yokearm Ear Nuts Steel A-563, Grade A or B
Yokearm Carbon Steel A-216, Grade WCB
Eyebolts Steel A-3D7, Grade B
Gland Flange Carbon Steel A-216, Grade WCB
Packing Grafon Commercial
Graov-Pins Sleel Commercial
Packin 9 Washer Steel A-lOa, Grade 101511025
Back Seat Bu sh ing Stainless Steel t A-276, Type 410
Bonnet Carbon Steel A-216, Grade WCB
Gasket (Corrugated) Stainless SteeV Commercial
Graphite Coated
BOdy Nuts Steel A-194, Grade 2H
Body Studs Steel A-193, Grade B7
Stem Stainless Steel tA-182, Grade F6a
Seat Rings SteeVStellite Facing A-519, Grade 1015/1025
Wedge Carbon SteeV 13% A-216, Grade WCB
Chrome Facing
Bonnet Studs Steel A-193. Grad e B7
Bonnet Nuts Steel A-194, Grade 2H
BOdy Carbon Steel A-216, Grade WCB
t OrEqual SPECIFICATIONS
• Flanged End valves have dimensions conforming to ASME B16.5, 816.10, B16.25, B16.34 and API 600
• Flanged End valves can be furnished with ring joint flanges
ORDERING
• When ordering Butt Welding End valves, specify schedule of pipe end and give complete data concerning style, figure number and contour of weld end
DIMENSIONS (Inches)
Size 16 18 20 24 30 36 40 thru 60
0 16 17 18 20 24 28
.. N 24 26 28 32 42 42 Data
OPlN
V 26 26 26 30 36 36 On
A 751/2 831/4 921/4 108 1311/21673/4 Request
D 15.25 17.25 19.25 23.25 29.25 35.00
WEIGHTS (Pounds)
Fig. 1503 1385 1810 2150 3260 5310
Fig. 1503WE 1500 2060 2360 3480 5480 THE WM. POWEll COMPANY - SINce 1846
36
CLASS 300
OUTSIDE SCREW RISING STEM BOLTED FLANGED YOKE-BONNET FLANGED ENDS
PRESSUREnEMPERATURERATINGS
In accordance with ASME 816.34 MATERIALS
CAST STEEL GATE VALVES
DESCRIPTION
ASTM Spec.
MATERIAL
Yoke Bush ing
Yoke Bushing Locknut Name Plate Handwheet
Handwheel Key Bushing Retainer Grease Fitting
Yoke
Stem
Gland Eyebolt Nut Gland Eyebolt Gland Eyeboll Pin Gland flange
Gland Follower PaCking
Yoke Boll
Yoke Bolt Nut Gasket (Corrugated) Body
Disc
Seat Ring
tOr Equal
Aluminum Bronze Stainless Steel Aluminum Malleable Iron Steel
Steel
Steel
Steel
Stainless Steel Stainless Steel Stainless Steel Steel
Steet
Steel
Grafoil
Steel
Steel
Stainless Steel/Graphite Coated Steel
Stainless Steel Stainless Steel
B505 Alloy 95400 A-582. Type 416 Commercial
A-47. Grade 32510 A-lOB. Grade 101511025 AISI G-12, L-14 Commercial
A-216, Grade WGB tA-1B2. Grade F6a A-194. Grade BB Commercial
Commelcial
Commercial
A-lOB, Grade 1020 Commercial
A-193, Grade
A-194. Grade2H Commercial
A-216. Grade WCB A-217, Grade CAl5 A-312, Type 316
Fig. 3003
Sizes, 1~ through 1 1/2~
Fer Sizes, 2" and larger see pages 38, 39
SPECIFICATIONS
·Flanged End valves have dimensions conferming to, ASME 816.5 and 816.10
·Flanged End valves can be furnished with ring [olnt flanges
FEATURES
·Solid Wedge are accurately guided to, the seating surfaces.
'Seat Rings are welded in valve body ·Male and female bonnet joint assure alignment and compresses the
gasket eliminating any possibility of a blow-out
ORDERING
-Double Wedges are available on special order and are interchangeable with the So1\d Wedge
DIMENSIONS (Inches)
Size 1 11/2
C 61/2 71/2
G 10 1225/32
H 41/2 7
WEIGHTS (Pounds)
Fig. 3003 19 34 37
THE WM. POWELLCOMPANY-$INCE 1846
CAST STEEL GATE VALVES
Fig,3003 Flanged
Fig. 3003WE - Welding Sizes, 2" through 12"
For SiZes, 14·lhrough 42" see page 39
FEATURES
-Flexible Wedge insures pressure tightness and reduces operating torque needed to open (he valve. Solid Wedges are furnished in valves-2" and 2 1/2"
·Stellite faced Seat Rings are welded into the body. This provides a positive no-leak seal of the ring in the valve body and will resist corrosion, erosion and galling
·BonnetIYokearm permits easy installation of an actuator, adapto gearing, cylinder or motor
·Valves are furnished with a back seat bushing arrangement in the bonnet -Valves, sizes 2" and 2 1/2" have square bonnets and nested gasket
CLASS 300
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM FLANGED and WELDING ENDS
PRESSUREnEMPERATURERATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION MATERIAL ASTMSQec.
Handwheel Nut Malleable Iron A-47. Grade 32510
Handwheel Malleable Iron A-47, Grade 32510
Handwheel Key Steel A-lOS, Gradel015/1025
Stem Bushing Locknut (2'-4") Malleable iron A-47. Grade 32510
Bonnet Carbon Steel A-216. Grade WCB
Lubricant Fitting Commercial
Stem Bushing Ouctile Ni-Resist A-439. Type 02
Stem Stainless Steel t A-l82. Grade f6a
Eyebolt Nuts Steel A-563. Grade A or B
Gland Flange Steel AISl1030
Gland Steel A-l08, Gr. 101511025
Groov-Pios Steel Commercial
Eyebolls Sleel A-307. Grade B
PaCking Grafoil Commercial
Body Nuts Steel A-194. Grade 2H
Body Seat Bushing Stainless Steel t A-276, Type 410
Body Studs Steel A-193. Grade B7
Gasket (OoulJle Jacket) Solt IronlSleel • Commercial
Body Carbon Steel A-216, Grade WCB
Seat Ring Steel/Stellile facing A-519. Gr. 1015{1025
Wedge Stainless Steel 01 A-217. Grade CA 15
Carbon Steel{13% A-216. Grade WCB
Chrome Facing
Cap Screws (6"-12') Steel A-449
Bearing Cap (6' -12") Malleable Iron A-47, Grade 32510
Yokearm (10'-12') Carbon Steel A-216. Grade WCB
Yokeann Nuts (10"-12') Sleel A-194, Grade 2H
Yokearm Slims (10'-12') $lee' A-l93. Grode B7
Packing Washer Steel A-I08. Gr. 101511025
Packing Spacer Steel A-lOS. Gr. 1015/1025 t Or Equal
" Non-Asbestos Insert
ORDERING
·When ordering Butt Welding End valves, specify schedule of pipe end and give complete data concerning style, figure number and contour of weld end
SPECIFICATIONS
·Flanged and 8utt Welding End valves conform to ASME 816.5816.10, B16.25, B16.34 and API 600
-Flanged End valves can be furnished with ring joint flanges
THE WM. POWELL COMPANY-SINCE 1846
DIMENSIONS (Inches)
Sizes 2 21/2 3 4 6 8 10 12
0 81/2 91/2 111/8· 12 157/8 161/2 18 193/4
N 81/2 91/2 111/8 12 157/8 161/2 18 193/4
A 151/2 163/4 191{4 237/8 331/8 411/4 501/4 575/8
V 8 8 9 10 14 16 20 20
0 2.067 2.469 3.068 4.026 6.065 7.981 10.02 12.00 WEIGHTS (Pounds)
Fig.3003 57 Fig. 3003WE 45
800 690
1230 940
85 60
110 80
165 120
320 250
500 410
38
CAST STEEL GATE VALVES
Fig,3003
Flanged Fig.3003WE-Welding Sizes, 14" through 42" Above 30· data on Request
FEATURES
·Solid Wedges are accurately guided to the seating surfaces. Flexible wedge can be furnished when ordered.
·Stellite faced Seat Rings are welded into the body. This provides a positive no-leak seal of the ring in the valve body.
·Lubricant fitting is provided to permit stem bushing lubrication for ease of operation. ·Valves are furnished with a back seat bushing arrangement in the bonnet
ORDERING
·When ordering Butt Welding End valves, specify schedule of pipe end and give complete data concerning style, figure number and contour of weld end
CLASS 300
BOLTED FLANGED YOKE .. BONNET OUTSIDE SCREW RISING STEM FLANGED and WELDING ENDS
PRESSURBTEMPERATURERATINGS In accordance with ASME B16.34
MATERIALS
DESCRIPTION
MATERIAL
ASTMSpec.
Handwheel Handwheet Key Handwheet Nut Lubricant Fitting
Stem Bushing Ductile Ni-Resist
Yokearm Ear Botls (14" & 16") Steel
Yokearm Ear Nuts (14" & 16") Steel
Sonnet S\uds Steel
Bonnet Nuts Steel
Yokearm Carbon Steel
Cap Screws (1S"·30") Steel
Eyebolts Steel
Eyebolts Nuts Sleel
Gland Flange Carbon Steel
Gland Steel
Packing Grafoil
Groov-Pins Steel
Packing Washer Steel
Back Seat BUShing Stainless Stee'
Bonnet Carbon Steel
Gasket (Double Jacketed) Soft Iron/Steel'
Body Carbon Steel
Body Studs Steel
Body Nuts Steel
Oil Seals (1S"-30") Stem
Seat Rings Wedge
Bearing Cap (18"·30") Thrust Bearings (18"-30")
Malleable Iron Steel Matleable Iron
Stainless Steet Steel/Stellite Facing
Carbon SteeV13%Chrome Facing Steel
'Non-AsbeslO$ Insert ro- Equal
A-47, Grade 32510 A-10S, Grade 1015/1025 A-47, Grade 32510 Commercial
A-439, Type D2
A-307, Grade B
A-563, Grade A or B A·1S3, Grade B7
A·1S4. Grade 2H
A·216. Grade WCB A-449
A·307. Grade B A-S63, Grade A or B A·216, Grade WCB A-10S. Gr, 1015/1025 Commercial Commercial
A-10S. Gr, 1015/1025
t A·276. Type 410 A-216, Grade WeB Commercial
A·216. Grade WCB A-193, Grade B7 A-1S4, Grade 2H Commercial
tA·1S2, Grade F6a A-519. Gr. 101511025 A-216. Grade WCB A-36
Commercial
SPECIFICATIONS
·Flanged and Butt Welding . End valves have dimensions conform to ASME B16.5, B16.10, B16.25, B16.34 and API 600 ·Flanged End varves can be furnished with ring joint flanges
THE WM. POWEll COMPANY-SINCE 1846
DIMENSIONS {Inches}
Size 14 16 18 20 24 30 36 thru 42
0 30 33 36 39 45 55 Data
N 30 33 36 39 45 55 On
V 26 26 30 30 36 36 Request
A 71 771/2 91 993/4 122 1/2 1453/4
0 To Be Specified
WEIGHTS (Pounds)
Fig. 3003 2085 2725 3790 4230 6850
Fig3003WE 1690 2200 3230 3700 4500 39
CAST STEEL GATE VALVES
CLASS 600
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM FLANGED and WELDING ENDS
PRESSUREnEMPERATURERATINGS In accordance with ASME 816.34
MATERIALS
DeSCRIPTION
MATERIAL
ASTMSpec.
Fig. 6003
Flanged Fig.6003WE-Wetding Sizes. 2" through 30' Above 20· Data on Request
FEAl11RES
·Solid Wedge is accurately guided to the sealing surfaces.
·Stellite faced Seat Rings are welded into the body. This provides a positive no-teak seal of the ring in the valve body.
·Lubricant fitting is provided to permit stem bushing lubrication for ease of operation. ·Valves are furnished with a back seat bushing arrangement in the bonnet.
Handwheel Nut Handwheel Handwheel Key Lubricant Fitting Stem Bushing
Yokearm Ear Bolts (2" & 4") Yokearrn Ear Nuts (2" & 4") Eyebolts
Eyebolts Nuts
Packing
Yokearm
Gland Flange
Gland
Groov·Pins
Bonnet Nuts
Sonnet Studs
Packing Washer
Back Seat Bushing
Sonnet
Gasket (Double Jacketed) Body Nuts
Body Studs
Stem
Solid Wedge (2"-6")
(S"· 20")
Cap Screws (S"·20") Bearing Cap (S" -20")
Oil Seals (S" - 20") Thrust Bearings (S"-20") Seat Ring
Body
·Non-Asbestos Insert tar Equal
Malleable Iron Malleable Iron Steel
Ductile Ni-Resist Steel
Steel
Steel
Steel
Graroil
Carbon Steel Carbon Steel Steel
Steel
Steel
Steel
Steel
Stainless Steel Carbon Steel Soft IronJSteel" Steel
Sleel
Stainless Steel Stainless Steel Carbon Slee1/13% Chrome Facing Steel
Steel
SteelfStellile Facing Carbon Steel
A-47. Grade 32510 A-47. Grade 32510 A-108. Grade 101511025 Commercial
A-439. Type 02
A-307, Grade B
A-563. Grade A or B A-307, Grade B
A-563. Grade A or B Commercial
A·216, Grade WCB A·216. Grade WCB A-108, Gr. 1015/1025 Commercial
A-194, Grade 2H A-193. Grade B7 A-10S. Gr. 1015/1025
t A-276. Type 410 A-216, Grade WCB Commercial
A-194. Grade 2H A-193, Grade B7
t A·182, Grade F6a A·217, Grade CA15 A-216, Grade WCB
A-449
A·36 CommercIal Commercial
A-519. Gr. 1015/1025 A-216. Grade WCB
ORDERING
·When ordering other than standard Butt
Welding End valves, specify schedule of pipe and give complete data conceming
style, figure number and contour of weld end
SPECIFICATIONS
·Flanged and Butt Welding End valves conform to ASME 616.5, 616.10,616.25.616.34 and API 600 ·Flanged End valves can be fumished with ring joint flanges
DIMENSIONS (Inches)
Size 2 21/2 3 4 6 8 10 12 14 16 18 20 24 thru 30
v 0 111/2 13 14 17 22 26 31 33 35 39 43 47 Data
N 111/2 13 14 17 22 26 31 33 35 39 43 47 On
A 191/2 221/2 253/4 303/4 421/2 52 61 71 741/2 903/4 94 991{4 Request
V 9 10 12 14 22 22 26 30 30 36 36 36
0 To Be Specified
WEIGHTS (Pounds)
Fig.BOO3 110 150 200 320 720 1070 1780 2260 3050 4350 5550
Fi9.6003WE 85 130 160 270 590 970 1520 1880 2560 3720 5000 THE WM. POWELL COMPANY-SINCE 1846
40
CAST STEEL GATE VALVES
Fig, 9003 Flanged
Fig. 9003WE.Welding Sizes, 3" through 24" Above 20" Data on Request
FEATURES
-Solid Wedge is accurately guided to the seating surfaces.
-Lubricant fitting is provided to permit ease of operation of valve
=Lantem rings, when ordered, can be substituted for condensing chambers ·Valves are furnished with a back seat bushing arrangement in the bonnet.
ORDERiNG
-When ordering Butt Welding End valves, specify schedule of pipe end and give complete data concerning style, figure number and contour of weld ends
CLASS 900
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM FLANGED and WELDING ENDS
PRESSUREnEMPERATURERATINGS In accordance with ASME B16.34 MATERIALS
DESCRIPTION
MATERIAL
ASTMSpec.
Stem Busing Nul HandY/heel (3' -8')
(10"-18') Handl'ltieel Key lubricant Fitting Stem Bushing
Oil Seals (6' -18'_ Bearing (6"-18')
Yokearm Ear Bolls & Nuts (3' -4') ¥o\(eaim
Eyebolls & NulS
Gland
Gland Flange Packing Groov·Pins Bonnet Nuts Bonnet Studs Packing Washer Back Seat Bushing Bonnel
Gasket
Body Nuts
Body Studs
Stem
Seat Ring
Gap Screws (6'·18') Bearing Gap
Solid Wedge (3' ·4') (6"18')
Body tOr Equal
Malleable Iron Malleable Iron Duclile Iron Steel
Bronze
Steel
caioon Steel Sleel
Steel
Garbon Steel Grafoil
Sleel
Steel
Sleel
Sleel
Stainless Steel CarbOn Steel Spital WouM Sleel
Sleel
Stainless Steel Sta'mless Sleet Sleel
Sleel
Siainfess Steel Carbon Sleel/13% Chrome Facing Carbon Steel
A-47, Grade 32510 A-47, Grade 32510 A-445
A-I 08 Grade 1015/1025 Commercial
B505 Alloy 95400 Commercial Commercial A·30?, Grade B A-211), Groile WCB A·307, Grade B
A-I 08, Gr. 101511025 A·216. Grade WCB Commercial Commercial
A-194, Grade 2H M93, Grade B7 A·l08, Gr. 1015/1025
t A-276, Type 410 A-216, Grade WCB Commercial A-194. Grade 2H A·I93, Grade B7
t A-182, Grade F6a 11-519, Gr. 1015/1025 A·449
A-36
A-217. Grade CA 15 A-216, Grade WCB
A·216, Grade WCB
SPECIFICATIONS
=Flanged and Butt Welding End valves conform to ASME 816.5, 816.10,816.25,816,34 and API 600
·Flanged End valves can be furnished with ring joint flanges
THEWM. POWELL COMPANY-SINCE 1846
DIMENSIONS (Inches)
Size 3 4 6 8 10 12 14 16 18 20 24
0 1500 Class 15 18 24 29 33 38 401/2 441/2 48 Data
N Valves ale 15 18 24 29 33 38 40 1/2 44 1/2 48 On
regularly
A supplied for 281/4 321/2 461/4 51 63 731/2 803/8 83 7/8 97 Request
v 900 Class 14 17 22 26 30 30 30 36 36
Gale Valves in
sizes below 3
incoes
D TO BE SPECIFIED
WEIGHTS (Pounds)
Fig. 9003 280 450 1050 1320 2340 3400 4250 4900
Fig.9003WE 240 380 910 1100 2190 3110 4050 41
CAST STEEL GATE VALVES
Fig. 1303 Flanged
Fig. 1303WE-Welding Sizes. 2" through 24" Above 12" Data on Request
FEAllJRES
·Solid Wedge are accurately guided to the seating surfaces.
·Lubricant fitting is provided to permit ease of operation of valve
·Lantern rings, when ordered, can be substituted for condensing chambers ·Valves are furnished with a back seat arrangement in the bonnet.
ORDERING
·When ordering Butt Welding End valves, specify schedule of tubing or pipe end and give complete data concerning style, figure number and contour of weld ends
CLASS 1500
BOLTED FLANGED YOKE"BONNET OUTSIDE SCREW RISING STEM FLANGED and WELDING ENDS
PRESSUREnEMPERATURERATINGS In accordance with ASME 816.34 MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec.
Stem BUSing Nut Handwlleel (2' ·4')
(6"-12') Handwheel Key Lubricant Fitting Stem Bushing
Yokearm Ear Bolls & Nuts (2'- 4'}
Eyebolts & Nuts
Packing
Yokearm
Gland Flange
Gland
Groov,Pins
Bonnet Nuts
Bonnet Studs
Packing Washer
Back Seat Bushing Bonnet
Gasket
Body Nuts
Body Studs
Stem
Solid Wedge (2'-4') (S'·12')
Cap Screws (6'-12') Bearing Cap (6' -12') Oll Seals (S' -12') Bearings (5'-12') Seat Ring
Body
tOr Equal
Malleable Iron Malleable Iron DucHle Iron Steel
Bronze
Sleel
Steel
Gra(oil Carbon Steel Carbon Steel Steel
Sleel
Steel
Sleel
Steel
Stainless Steet Carbon Steel Spiral Wound Sleel
Steel
Stainless Steel Stainless Steel
Carbon Slee113% Chrome Facing
Steel
Steel
Steel
Steel!Steliite Facing Carbon Sleel
A-47, Grade 32510 A-47, Grade 32510 A-445
A-l08.Gr. 1015/1025 Commercial
8505 Alloy 95400
A-3D7. Grade B A-307. Grade B Commercial
A-216. Grade WCB A-21S. Grade WCB A-lOS. Gr. 1015/1025 Commercial
A-194, Grade 2H A-1S3. Grade B7 A-lOS, Gr.l015!1025
t A-276, Type 410 A-21S. Grade WCB Commercial A-194. Grade 2H A-193. Grade B7
t A·182, Grade FSa A·m. Grade CA15 A-21S, Grade WCB
A·449
A-36
Commercial Commercial
A-S19, Gr. 101511025 A-21S. Grade WCB
SPECIFICATIONS
·Flanged and Butt Welding End valves conform to ASME B16.5, B16.10, B16.25, 616.34 and API 600
-Flanqed End valves can be furnished with ring joint flanges
THE WM. POWELL COMPANY-SINCE 1846
DIMENSIONS (Inches)
Size 2 21/2 3 4 6 8 10 12 14 thru 24
0 141/2 161/2 181/2 211/2 273/4 323/4 39 441/2 Data
N 141/2 161/2 181/2 211/2 273/4 323/4 39 44112 On
:...A 24 275/8 301/2 35518 47 561/2 681/4 801/2 Request
I V 12 15 16 18 26 30 36 36
D To Be Specified
WEIGHTS (Pounds)
Fig. 1303 225 350 460 670 1400 2500 5200 5500
Fig. 1303WE 180 300 390 550 1230 2200 5100 5340 42
CAST STEEL GATE VALVES
Fig. 25003 Flanged
Fig. 25003 WE-Welding Sizes, 2" through S·
FEATURES
·Solid Wedge are accurately guided to the seating surfaces.
·lubricant fltling is provided to permit ease of operation of valve
·Lantern rings, when ordered, can be substituted for condensing Chambers ·Valves are furnished with a back seat arrangement in the bonnet.
ORDERING
·When ordering Butt Welding End valves, specify schedule of tubing or pipe end and give complete data concerning style, figure number and contour of weld ends
CLASS 2500
BOLTED FLANGED YOKE·BONNET OUTSIDE SCREW RISING STEM FLANGED and WELDING ENDS PRESSUREnEMPERATURERATINGS
In accordance with ASME 816.34 MATERIALS
DESCRIPTION MATERIAL ASTM Spec.
Stem Busing Nut Malleable Iron A-47, Grade 32510
Hanciwhcel Malleable Iron A-47, Grade 32510
Handwhsel Key Steel A-lOS, Grade 1015/1025
Lubricant Fitting Commercial
Stem Bushing Bronze 8505 Alloy 95400
Yokearrn Ear Bolts & Nuts Steel A-307, Grade 8
(2"-4·)
Eyebolts & Nuts Steel A-307, Grade 8
Packing Grafoil Commercial
Yokearm Carbon Steel A-216, Grade WCB
Gland Flange Carbon Steel A-2l6, Grade WCB
Gland Steel A-10S, Gr. 101511025
GrooV-Pin Steel Commercial
Bonnet Nuts Steel A-194. Grade 2H
Bonnet Studs Steel A-193. Grade B7
Packing Washer Steel A-10S. Gr. 101511025
Back Seat Bushing Stainless Steel t A-276, Type 410
Bonnet Carbon Steel A·216, Grade WCB
Gasket Spiral Wound Commercial
Body Nuts Steet A·194, Grade 2H
Body Studs Steel A-193, Grade 87
Stem Stainless Steel t A-1S2, Grade F6a
SOlld Wedge (2"-4") Stainless Steel A-217, GradeCA15
(6"-S") Carbon Sleel13% A-216, Grade WCB
Chrome Facing
Cap Screws (6"-S") Steel A-449
Bearing Cap (6" -SO) Steel A-36
Oil Seal (6" -S") Commercial
Bearings (S"-S") Commercial
Seat Ring SleeUStellite Facing A·519, Gr. 1015/1025
Body Carbon Steel A·216, Grade WCB
torEqu31 SPECIFICATIONS
·Flanged and Butt Welding End valves conform to ASME 816.5, 816.10, 816.25, 816.34 and API 600
-Flanged End valves can be fumlshsd with ring joint flanges
v DIMENSIONS (Inches)
Size 2 21/2 3 4 6 8
0 173/4 20 223/4 261/2 36 401/4
N 173/4 20 223/4 261/2 36 401/4
A 26 30 32 37 49 59
V 16 18 22 26 30 30
D To Be Specified
WEIGHTS (Pounds}
Fig. 25003 230 400 740 1840 3460
Fig. 25003WE 423 THE WM. POWELL COMPANY-SINCe 1846
43
CAST STEEL GLOBE and ANGLE VALVES
Fig. 1531 Flanged
Fig. 1531 WE·Welding Globe Valve
Sizes, 2" through 20" Above 12" Data on Request
Fig. 1533·Flanged Fig. 1533 WE·Welding Angle Valve Sizes, 2" through 12"
FEATURES
·Discs are retained to the stem by a disc locknut and are fully guided. The spindle on the under side of the disc is guided through a bridge cast integral with the seat, assuring better alignment and uniform seating at all times
·Valves are furnished with a back seat arrangement in the bonnet
CLASS 150
BOLTED FLANGED BONNET FLANGED and WELDING ENDS
PRESSUREnEMPERATURERATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIAL
ASTMSpec.
HandWheel Nut HandWheel
Upper Bushing Bushing Set Screw Gland Bolts s Nuts Gland
Gland Flange Packing Washer Bonnet
Packing
Body Nuts Body Studs
Gasket (Corrugated) Back Seat Bushing Stem
Disc Nul
Disc (2'·6')
(8'·12') Seat Ring Body
tOr Equal
Steel
Malleable Iron Ductile Ni·Resist Steel
Steel
Steel
Steel
Steel
Carbon Steel Grafoil
Steel
Steel
Stainless Steel/Graphite Coated Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Carbon Steel/13% Chrome Facing Stainless Steel! Stelli!e Facing Carbon Steel
A·563. Grade A or B A·47, Grade 32510 A·439, Type D2C
A·l08, Grade 1015/1025 A-307, Grade B
A-l08, Gr. 1015/1025 Commercial
A-10a, Grade 1015/f025 A-216, Grade WCB Commercial
A·194. Grade 2H
A-193, Grade B7 Commercial
t A-276, Type 410 t A-276. TyPe410
t A-217, Grade CA 15 A·217, Grade CA1S A·216, Grade WCB A·217, Grade CA 15 A·216, Grade WCB
SPECIFICATIONS
·Flanged and 8utt Welding End Globe and Angle valves have dimensions in accordance with ASME 816.5. 816.10,816.25 and 816.34
ORDERING
·When ordering other than standard Butt Welding End vatves, specify schedule of tubing or pipe and give complete data concerning style, figure number and contour of weld ends
THE WM. POWELL COMPANY-SINCE 1846
DIMENSIONS (Inches)
Size 2 21/2 3 4 6 a 10 12 14 thru 20
a 8 a 1/2 91/2 111/2 16 191/2 241/2 271/2 Data
. . R (F.E.) 43/4 On
..... -·~··~~_"......,....,_l 4 41/4 5 3/4 8 9 3/4 121/4 133/4
liT
..
N 8 81/2 91/2 111/2 16 191/2 241/2 271/2 ReQuest
s R.(W.E.) 4 41/4 43/4 53/4 a 93/4 121/4 133/4
i •
( ,.' V 8 a 9 10 12 16 18 22
I A 121/2 14 151/2 1a1/2 211/2 241J2 291J2 323/4
~J~ D 2.07 2.50 3.07 4.03 6.07 7.98 10.02 12.00
I) '.' ~~ WEIGHTS (Pounds)
"*" tt'uu. !. Fig. 1531 51 65 86 133 245 430 730 810
" Fig. 1531WE 40 52 73 120 211 381 680 710
~ 44
CAST STEEL GLOBE and ANGLE VALVES
Fig. 3031 flanged
Fig. 3031 WE-Welding Globe Valve
Sizes, 2" through 24" Above 12" Data on Request
Fig. 3033 Flanged
Fig. 3033 WE-Welding Angle Valve Sizes, 2" through S"
FEATIJRES
-Discs are retained to the stem by a disc locknut and are fully guided. The spindle on the under side of the disc is guided through a bridge cast integral with the seat, assuring better alignment and uniform seating at all times
·Valves are furnished with a back seat arrangement in the bonnel
CLASS 300
BOLTED FLANGED BONNET FLANGED and WELDING ENDS
PRESSUREnEMPERATURERATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIr..l
ASTMSpec,
Handwheel Nut Handwheel
Upper Bushing Bushing Set Sclew Eyebolts & Nuts Gland
Gland Flange Packing Washer Bonnet
Packing
Body Nuts
Body Studs
Gasket (Double Jacketed) Back Seat Bushing
Stem
Disc Nut
O'ISC (2' -5')
(8'-12')
Seat Ring
Body
Thrust Washer
• Non·Asbestos Insert tOr Equal
Steel
Malleable fran Ouc!ile Ni-Resist Stool
Steet
Steel
Steel
Steel
Carbon Steel Grafoil
Steel
Steel
Soft Iron/Steel' Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Carbon Stool/13% Chrome Facing
$Iainless Steel/ SteJlile facing
Carbon Steel
Nitralloy
A-563, Grade A 01 B A-47. Grade 32510 A-439. Type 02C Com;mrcial
A-307, Grade B A-lOB, Gr. 1015/1025 Commercial
A-lOB, Grade 1015/1025 A-216, Grade WCB Commercial
A-194. Grade 2H
A-193. Grade B7 Commercial
t A-276, Type 410 t A-276, Type 410
t A-217. Grade CA15 A-217. Grade CA1S A-2l5, Grade WCB
A-217, Grade CA1S
A-216, Grade WeB AMS6470E
SPECIFICATIONS
-Flanged and Butt Welding End Globe and Angle valves have dimensions in accordance with ASME B16.5, 816.10, B16.25 and 616.34
ORDERING
·When ordering other than standard Butt Welding End valves, specify schedule of pipe and give complete data concerning style, figure number and contour of weld ends
DIMENSIONS (Inches)
Size 2 21/2
A o WEIGHTS (Pounds)
Fig. 3031... ... 60 93
Fig. 3031 WE .. 47 74
a
R (F.E.) N R.(W.E.) v
THEWM.POWElLCOMPANy-srNCEI846
3
10'/2 5 '/. 10'/2 5'/. 8
18 2.07
11'/2 53/. 111/2 53/. 9 19'/2 2.47
12'/2 6 '/. 12'/2 6 '/. 10 203/. 3.07
14
7
14
7
13 24'/2 4.03
113 85
45
4
6
8
17'/2 83/. 17'/2 83/. 18
31 v. 6.07
22
11
22
11
22 37 J/. 7.98
173 132
325 267
481 411
10
12
14 thru24
24'/2
Data On Request
28
24'/2
28
26' 4,41/z 10.02
30' 473/8 12.00
686 605
837 680
CAST STEEL GLOBE and ANGLE VALVES
Fig. 6031 Flanged
Fig. 6031 WE-Welding Globe Valve
Sizes, 2" through 16" Above 12" Data on Request
Fig. 6033 - Flanged Fig. 6033 WE-Welding Angle Valve Sizes, 3" through 8"
ORDERING
-When ordering other than standard 8utt Welding End valves, specify schedule of pipe and give complete data concerning style, figure number and contour of weld ends
CLASS 600
BOLTED FLANGED BONNET FLANGED and WELDING ENDS
PRESSUREnEMPERATURERATINGS In accordance with ASME B16.34 MATERIALS
DESCRIPTION
ASTM Spec.
Hanfh,tleel
(21/2' and larger)
(2" and smaller) HJodlltleel Nut HJndlltleel Retainer Plate (2 1/2' & larger)
Gasket (DOuble Jacketed) PaCking
Crossarm (2 1/2' & larger) 8a<:K Seat Bushing
Body Studs
Body Nuts
Gland
Gland Flange Eyebolts & Nuts Groov-Pins BOOy
Bonnet
Disc (2' & 4') (6' -12")
Seat Ring S1em
PaCking Washer
Upper Bonnet BuShing Disc Nut
Thrust Washer
'Non-Asbestos Insert tOr Equal
MATERIAL
Car!){)nSteel Malleable Iron Steel
Steel
Soft IroniSteel' Grafoi!
Carbon Steel Stainless Steel Steel
Steel
Steet
Carbon Steel Steel
Steel
Carbon Steel Carbon Steel Stainless Steel Car!){)n Stee1/13% Chrome Facing
Stainless SteellStellite Facing Stainless $Ieel
Steel
Bronze
Siainiess $teel
Nitralloy
A-ZI6. Grade WCB A·47. Grade 32510 A-307. Grade B
A-36
Commercial Commercia! A·216. Grade WCB
t M.76. Type 410 A-l93. Grade B7 A-194. Grade 2H
A-lOS, Grade 101511025 A·216. Grade WCB A-307, Grade B Commercial
A·216. Grade WCB MIG, Grade WGB A-217. Grade CA1S A·216. Grade WCB
A-217.GradeCA1S t A-276. Type 410
A-lOS. Grade 1 015{1 025 B505 AllOy S5400
t A-276. Type 410 AMS6470-E
SPECIFICATIONS
-Flanged and 8utt Welding End Globe and Angle valves have dimensions in accordance with ASME 816.5, 816.10, 816.25 and 816.34
FEATURES
-Disc are retained to the stem by a disc locknut and are fully guided
-Valves are furnished with a back seat arrangement in the bonnet
DIMENSIONS (Inches)
Size 2 2 1/2 3 4 6 8 10 12 14 16
r - 0 11112 13 14 17 22 26 31 33
:'-'
be., .... ~>~_ ,ot R.(F.E.) 7 81/2 11 13
:¥ ' N 111/2 13 14 17 22 26 31 33 Data
, re ~ : • ~~ R.(W.E.) 7 81/2 11 13 On
""" • 9 Request
~~ ~~:, *~·i~ .... v 12t 12t 16t 20t 20t 26t 30t
r- "@' . ., .': ;0 A 183f4 211/4 221/2 271/4 333/4 461/2 49 53
ia -;:: ' .. ~- v;.i ~.1J. ~~~ f:- : 0 1.94 2.32 2.90 3.83 Schedule 80
*~ '&..:;:y\: jJ r~ '0.·-::':·'A;cr
. ' •• I~ tHammerblow Handwheel
; lN1uJr ~rI'u,."
~'~>I/'-///~>~ tv-· v.; ...... ,,
;!L_.~ til ~'~(: .. -~ WEIGHTS (Pounds)
_U--'
6031 94 130 166 315 630 1130 2100 2780
6031 WE 75 115 140 240 480 1070 1800 THE WM. POWELL COMPANY-SINCE 1846
46
CLASS 900
BOLTED FLANGED BONNET fLANGED and WELDING ENDS
PRESSUREnEMPERATURERATINGS tn accordance with ASME B16.34
MATERIALS
CAST STEEL GLOBE and ANGLE VALVES
MATERIAL
ASTM Spec.
DESCRIPTION
A-216, Grade WCB A-307. Grade B A-36
Commercial Commercial A-216, Grade WCB
t A-276, lype 410 A-193, Grade B7 A-194, Glade 2H A-lOB. Gr. 1015/1025 A-216. Grade WCB A-307, Grade B Commercial
A-216. Grade WCB A-216. Grade WCB A-Z7G, Type 410 A-216, Grade WCB
A-217, GradeCA15
t A-276, Type 410 A-l08. Gr. 1015/1025 B505 Alloy 95400
t A-276. Type 410 AMS6470-E
Carbon Steel Steel
Steel
Spiral Wound Grafoil
Carbon Steel Slain less Steel Steel
Slee!
Steel
Carbon Steel Steel
Steel
CarbOn Steel Carbon Steel Stainless Steel Carbon Steel/13% Chrome Facing
Stainless Steel/Stellite Facing Stain less Sleel
Steel
Bronze
Stainless Steel
NitraJloy
HMdwheel
Handwheel Nut Handwheel Reta iner Plate Gasket
Packing
Crossarm
Sack Seal Bushing Body Studs
800y NulS
Gland
Gland Flange Eyebolts & Nuts Groov-Pins Body
Bonnet
DiSC (3" & 4") (6" -12")
Fig. 9031 Flanged
Fig. 9031 WE-Welding Globe Valve
Sizes, 3" through 16" Above 12" Data on Request
Seat Ring Stem
Packing Washer Upper Bonnet Bushing Disc Nut
Thrust Washer
Fig. 9033-Ftanged Fig. 9033 WE-Welding Angle Valve Sizes, 3" through 6"
FEATURES
tOrEqual
Discs are retained to the stem by a disc locknut and are fully guided. The
spindle on the under side of the disc is guided through a bridge cast integral with the seat, assuring better alignment and uniform seating at all times
Valves are furnished with a back seat arrangement in the bonnet
Valves have Hammerblow Handwheel
•
SPECIFICATIONS
• Flanged and Butt We!ding End Globe and Angle valves have dimensions in accordance with ASME 616.5, 616.10, 16.25 and 16.34.
•
ORDERING
• Flanged and Butt Welding End Angle valves are supplied on special order
• When ordering Butt Welding End valves, specify schedule of tubing or pipe end and give complete data concerning style, figure number and contour of weld ends
•
DIMENSIONS (Inches)
Size 3 4 6 8 10 12 14 16
0 1500 Class Valves 15 18 24 29 33 38
R.(F.E.) are regularly 71/2 9 12 DATA
N supplied for 900 15 18 24 29 33 38 ON
R.(W.E.) Class Globe and 7112 9 12
A Angle Valves in 26314 301/2 401/2 54 66112 81 REQUEST
V S\zesbelcw 14 16 20 26 30 36
D 3 inches To Be Specified
WEIGHTS (Pounds)
Fig. 0031 280 445
Fig.9033WE 210 360 915 1760 THE WM. POWELL COMPANY -SINCE 1646 47
CAST STEEL GLOBE VALVES
CLASS 1500
BOLTED FLANGED BONNET FLANGED and WELDING ENDS
PRESSUREITEMPERATURERA~NGS In accordance with ASME B16.34
MATERIALS DESCRIPTION
MATERIAL
ASTMSpec.
A-216, Grade WGB A-47, Grade 32510 A-307, Grade B A-36
Carbon Steel Malleable Iron Steel
Steel
Handwheel (2 1/2'-6') Handwheel (2') Handwheel Nut Handwheel Retainer
prate {2 1/2' -o'} Gasket
Packing
Crossarm (2 1/2'-6) Back Seat Bushing Body Studs
Body Nuts
Gland
Gland Flange Eyebolls & Nuts Groov-Pins Body
Bonnet
Disc
Seat Ring
Stem
Packing Washer Upper Bonnet Bushing Disc Nul
Thrust Washer
Spiral Wound Graloil
Carbon Steel Stainless Steel Steel
Steel
Steel
Carbon Steel Steel
Steel
Carbon Steel Carbon Steel Stainless Steel Stainless SteelJ
Stellite FaCing Stainless Steel Steel
Bronze Stainless Steel Nitralloy
Commercial Commercial A-216, Grade WCB
t A-276, Type 410 A-193, Grade 87 A-194, Grade 2H
A-10S, Grade 1015/1025 A-216, Grade WCB A-307, Grade B Commercial
A-216, Grade WCB A-216, Grade WCB
t A-276, Type 410 A-217, Grade CA15
t A-276, Type 410
A-lOS, Grade 1015/1025 B505 Alloy 95400
t A-276, Type 410 AMS6470-E
Fig. 1331 Flanged
Fig. 1331 WE - Welding Sizes, 2" through 16" Above 6" Data on Request
FEATURES
• Discs are retained to the stem by a disc locknut and are fully guided. The spindle on the under side of the disc is guided through a bridge cast integral with the seat, assuring better alignment and uniform seating at all times
• Valves are furnished with a back seat arrangement in the bonnet
tOr Equal
SPECIFICATIONS
• Flanged and Butt Werding End Globe valves have dimensions in accordance with ASME B16.5, 816.10, 16.25 and 16.34.
ORDERING
• When ordering Butt Welding End valves, specify schedule of tubing or pipe end and give complete data concerning style, figure number and contour of weld ends
DIMENSIONS (Inches)
Size 2 21/2 3 4 6 8lhru 16
0 141/2 161/2 181/2 211/2 27314 Da1a
N 141/2 161/2 181/2 211/2 273/4 On
A 221/2 261/2 273/4 36 50 ReQuest
V 12 14' 16' 20' 30'
D To BeSpocifie1l
* Hammerbtow Handwheel
WEIGHTS (Pounds)
Fig. 1331 195 255 350 685 1300
Fig. 133fW£ 170 255 300 SSG 1380 48
THE WM. POWELL COMPANY -SINCE 1846
CAST STEEL NON·RETURN GLOBE and ANGLE VALVES
Fig. 3084 Flanged
Fig. 3084 WE-Welding Globe Valve Sizes, 3" through 12"
Fig. 3086-Flanged Fig. 3086 WE-Welding Angle Valve Sizes, 3" through 12"
FEATURES
• Globe and Angle Non-Return valves are required when two or more boilers are connected in a single mainheader. They close automatically, instantly cutting out the boiler connected in the battery when the pressure within this particular boiler suddenly drops betow that in the
header line. Non-Return valves 'must be mounted with the stem in vertical position so that the disc is free to close by gravity
• Equalizer-helps reduce pressure drop and prevents wear producing disc vibrations
CLASS 300
BOLTED FLANGED BONNET FLANGED and WELDING ENDS
PRESSUREnEMPERATURERATINGS In accordance with ASME 616.34
MATERIALS DESCRIPTION
MATERIAL
ASTM Spec.
Body Bonnet
Disc {3' & 4'} Disc (6' - 12")
Seat Ring Stem
Gland
Gland Flange Upper Bonnet
Bushing Handwheel Body Studs Body Nuts Packing
Gasket (Double
Jacketed) Packing Washer Equalizer Pipe BeM Groov-Pins Eyebolts & Nuts Handwheel Key
(10· & larger) Back Seat Bushing Handwheel Nut
• Non Asbestos Insert t Or Equal
Carbon Steel Carbon Stee I Stainless Sleel Carbon Steel/13%
Chrome Facing Steel{Stelllte Facing Stain less Steel Steel
Carbon Stee I Bronze
Malleable Iron Steel
Steel
Graloil
Soft Iron/Steel"
Steel Steel Steel Steel Steel
Stainless Steel Steel
A-216 Gr. WCB A-216, Grade WCB A-217 Gr. GAlS A-216 Grade WCB
A-1 06, Grade B
t A-276, Type 410
A-108, Grade 1015/1025 A-216, Grade WCB
8505 Alloy 95400
A-47, Grade 32510 A-193, Grade B7
A-194, Grade 2H Commercial
Commercial
A-l08, Grade 1015/1025 1\-106, Grade B Commercial
A-307, Grade B
A.-l08, Grade 1015/1025
t A-276, Type 410
A-307, Grade B
SPECIFICATIONS
• Flanged and Welding End valves have dimensions in accordance with ASME B16.5, B16.10 and B16.25
ORDERING
• Flanged and Welding End Globe and Angle valves are avallable on order
DIMENSIONS (Inches)
-_v-.:=:1rr IT Size 3 4 6 8 10 12
I Ii a 121/2 14 171/2 22 24112 28
d A 61/4 7 83/4 11 12114 14
L l~ N 12112 14 171/2 22 241/2 28
V 10 13 22 26 26' 30'
,- i'\ A·Open 201/4 221/2 27 $/4 32314 371/4 431/2
&1
'I B-CJosed 19118 20314 247/8 29112 33 1/8 39
II At-open 187/8 211/2 24 $/4 271/2 34 7/8 41 1/4
Bl·CJosed 167/8 193/8 221/2 2S 31 1/2 373/4
-TO. D 3.07 4.03 6.07 7.98 10.02 To Be Specified
J 'HammerbJow HandwheeJ
•
, WEIGHTS (Pounds)
Fig. 3084 140 230 415 725 1360 1880
Fig.3084WE 115 170 330 605 THE WM. POWEll COMPANY -SINCE 1846
49
CLASS 600
BOLTED FLANGED BONNET FLANGED and WELDING ENDS
PRESSUREfTEMPERATURE RATINGS
In accordance with ASME B 16.34
MATERIALS Description
CAST STEEL NON-RETURN GLOBE and ANGLE VALVES
ASTM Spec.
Material
A-216, Grade WCB A-36
Carbon Steel Steel
Handwheel Handwheel Retaining
Plate
Gasket (Double Jacketed) Packing
Crossarm
Back Seat Bushing Body Studs
Body Nuts
Equalizer Pipe Bend Gland
Gland Flange Pipe Plug Eyebolts & Nuts Groov-Pins Body
Bonnet
Disc
Seal Ring
Stem Handwheel Nut Packing Washer
Upper Bonnet Bushing HandwtJeel Key
Soft Iron/Steel* Gra/oil
Carbon Steel Stainless Steel Steel
Steel
Steel
Steel
Carbon Steel Steel
Steel
Steel
Carbon Steel Carbon Steel Steel/Slellite Facing Steel/Stellite Facing Slain less Steer Steel
Steel
Bronze
Sleer
Commercial Commercial A-216, Grade WCB
t A-276, Type 410 A-193. Grade B7 A-194, Grade 2H A-l06, Grade B Commercial A-216. Grade WCB Commercial A-3D7, Grade B Commercial A-216, Grade WCB A-2l6, Grade WCB A-516, Grade 70 A-l06, Grade B
t A-276. Type 410 A-3D7, Grade B A-l08, Grade 1020 B505 Alloy 95400 A-108, Grade 1020
Fig. 6084 Flanged
Fig. 6084 WE-Welding Globe Valve Sizes, 3" through 12"
Fig. 60B6-Flanged Fig. 6086 WE-Welding Angle Valve Sizes, 3" through 12"
FEATURES
• Globe and Angle Non-Retum valves are required when two or more boilers are connected in a single mainheader. They close automatically, instantly cutting out the boiler connected in the battery when the pressure within this particular boiler suddenly drops below that in the header line. Non-Retum valves must be mounted with the stem in vertical position so that the disc is free to close by gravity
• Equalizer-helps reduce pressure drop and prevents wear producing disc vibrations
* Non Asbestos Insert tOrEqual
SPECIFICATIONS
• Flanged and Welding End valves have dimensions in accordance with ASME 816.5,816.10 and 816.25
ORDERING
• Flanged and Welding End Globe and Angle valves are available on order
DIMENSIONS (Inches)
Size 3 4 6 8 10 12
0 14 1'7 22 26 31 33
R 7 61/2 11 13 15112 16112
N 14 17 22 26 31 se
V 12 16 20- 20- 26- 30-
A·Open 21318 24112 31318 36 42314 48
B·Closed 20114 22314 28112 32314
At-Open 19314 23316 29 1/4 335/8 39314 44
B1·Closed 17 7/8 215/6 263/8 30318
0 Schedule 80
* Hammerblow Handwheel
WEIGHTS (Pounds)
Fig. 80$4 165 320 705 900 1780 2000
Flg.60S4WE 145 890 1800 50
THE WM. POWELL COMPANY -SINCE 1846
CAST STEEL SWING CHECK VALVES
I------A-----__l
Fig. 1561 Flanged
Fig. 1561 WE-Welding Sizes, 1" through 36"
FEATURES
• These valves can be used in horizontal or vertical position; however, when installed in vertical line flow must be upward with the pressure under the disc
CLASS 150
BOLTED FLANGED CAP FLANGED and WELDING ENDS
PRESSUREfTEMPERATURE RATINGS In accordance with AS ME 816.34
MATERIALS
DESCRIPTION MAIERIAL ASIM Spec.
Body Carbon Sleel A216 Gr. WCB
Gover Carbon Steel A216 Gr. WCB
Disc Stain less Steel A217Gr.GA-15
Hinge C arbon Steel A216 Gr. WeB
Hinge Pin Stainless Steel A182 Gr. F6a
Seat Ring Steel/Stellite Facing A-519. Grade 101511025
Plug Carbon Steel 11.108 Gr. 1045
Gover Bolt Carbon Steel A193 Gr. B7
Gover Nut Carbon Steel A194 Gr. 2H
Disc Nut Carbon Steel A563 Gr. B
Washer Stainless Steel 11.276 Type 304
Eye Bolt Carbon Steel 11.307 Gr. B
Name Plate Stainless Steel 11.240 Gr. 304
Gasket SoU Metal G orrugated Type SPECIFICATIONS
• Flanged and Welding End valves have dimensions in accordance with ASME 816.5,816.10 and 816.25
• End flanges are fumished with 1/16" raised face; special end flange facings can be supplied on special order
ORDERING
• When ordering other than standard Butt Welding End valves, specify schedule of pipe and give complete data conceming style, figure number and contour of weld ends
DIMENSIONS (Inches)
Size 1 11/2 2 21/2 3 4 6 8 10 12 14 16 18 20 24 30 36
A. FE 5 61/2 8 81/2 91/2 11112 14 19112 24112 271/2 31 34 381/2 381/2 51 60 77
A.WE 5 61/2 II II 1/2 Sl/2 111/2 14 HH/2 241/2 271/2 31 34 381/2 381/2 51 00 77
B. 33/8 41/2 51/8 51/2 61/8 71/4 111/2 131/8 145/8 163/8 191{4 20112 22 231/4 275/8 341/4 41112
WI. (Lbs) F.E 9.5 25 42 53 71 113 177 320 481 695 9$0 1250 1550 1950 3440 4965 THEWM. POWELL COMPANY-SINCE 1846
51
CAST STEEL SWING CHECK VALVES
I
8
~---------A----------~
Fig. 3061 Flanged
Fig. 3061 WE-Welding Sizes, 1" through 36" Above 24" Data on Request
FEATURES
• These valves can be used in horizontal or vertical position; however, when installed in vertical line flow must be upward with the pressure under the disc
'Non Asbestos Insert
CLASS 300
BOLTED FLANGED CAP FLANGED and WELDING ENDS
52
PRESSUREnEMPERATURERATINGS In accordance with ASME 816.34
MATERIALS DESCRIPTION
MATERIAL
ASTM Spec.
Body
Cover
Disc
Hinge Hinge Pin Seat Ring Plug
Cover Bolt Cover Nut Disc Nut Washer EyeBolt Name Plate
Gasket (Double Jacketed)
Carbon Steel Carbon Steel Stainless Steel Carbon Steel Stainless Steel Steel/Stellite Facing Carbon Steel Carbon Steel Carbon Steel Carbon Steel Stainless Steel Carbon Steel Stainless Steel Sofllron/Sleel"
A216 Gr. WeB A216 Gr. wee A217 Gr. CA-15 A216Gr. wee A182Gr. FSa
A-519, Grade 1015/1025
Al0S Gr. 1045
A193 Gr. 87
A194 Gr. 2H
A563 Gr. 8
A276 Type 304
A307Gr. 8
A240Gr. 304 Commercial
SPECIFICATIONS
• Flanged and Welding End valves have dimensions in accordance with ASME 816.5, B16.10 and B16.25
• End flanges are furnished with 1/16" raised face; special end flange facings can be supplied on special order
ORDERING
• When ordering other than standard Butt Welding End valves, specify schedule of pipe and give complete data concerning style, figure number and contour of weld ends
DIMENSIONS (Inches)
Size 1 1 1/2 2 1/2 3 6 10 12 14 16 13 20 24 30 36
A. F,E, 8112 9112 10112 11112 12 III 14 17112 21 24 1/2 28 33 34 38112 40 53
A.W.E. 8112 9112 101/2 11112 12 l/2 14 171/2 21 24 1/2 28 33 34 381/2 40 53 DAIA
8. 33/8 S 112 S 718 6112 11/4 8114 12 H 114 161/8 18 201/4 22 1/4 281/8 29318 311/8 ON
WI. (lb$) F.L 1G 36 56 15 105 155 265 420 600 9SS 1570 19M 2210 2610 4280 REOUEST THE WM. POWELL COMPANY -SINCE 1846
CAST STEEL SWING CHECK VALVES
Fig. 6061 Flanged
Fig. 6061 WE-Welding Sizes, 1" through 30" Above 12" Data on Request
FEATURES
• These valves can be used in horizontal or vertical position; however, when installed in vertical line flow must be upward with the pressure under the disc
CLASS 600
BOLTED FLANGED CAP FLANGED and WELDING ENDS
PRESSUREnEMPERATURERATINGS In accordance with ASME 816.34
MATERIALS DESCRIPTION
MATERIAL
ASTM Spec.
A-216. Grade WCB A-515, Grade 70
A-519. Grade 101511025 t A-216. Grade WCB
Body Cap
Seat Ring Oisc
Carbon Steel Carbon Steel Steel/Stellite Facing Carbon Steel/13%
Chrome Facing Stainless Steel Stainless Steel Stainless Sleel Soft Iron/Steel* Steel
Steel
Stainless Steel Stainless Steel
A-217, Grade CA15 t A-582, Type 303
t A-276, Type 410 Commercial
A-193, Grade B7 A-194, Grade 2H Commercial
A-312, Type 316
Carrier Disc Nut Carrier Pin
Gasket (Double Jacketed) Body Studs
Body Nuts
Disc Nut Pin
Seat Ring (1" -11/2') 'N()ll Asbestos Insert
t Or Equal
SPECIFICATIONS
• Flanged and Welding End valves have dimensions in accordance with ASME 816.5,816.10 and 816.25
• End flanges are furnished with 1/4" raised face; special end flanges are available on special order
ORDERING
• When ordering other than standard 8utt Welding End valves, specify schedule of pipe and give complete data concerning style, figure number and contour of weld ends
-:::-- ~-: _. ~"":-X.~'V'"r DIMENSIONS (Inches)
~: Size 1 11/2 2 21/2 3 4 6 8 10 12 14 t!Jru 30
~7~~nl 0 81/2 91/2 111/2 13 14 17 22 26 31 33 Data
\<z:'.:ji N 81/2 91/2 111/2 13 14 17 22 26 31 33 On
~u ~i A 47/8 63/8 63f4 711{16 87f16 101/8 1215/16 143/4 1713/16 201/8 Request
~-.;;J. D Scnetiule80
.~ t:f WEIGHTS (Pounds)
!"".-,~~ .. ~,~-, •. ()-~ •. , .... , ... - .. ..,
Fig 6061 16 48 70 100 140 225 550 870 1300 1960
. Fig.6061WE 15 36 50 80 110 200 425 670 HE WM. POWELL COMPANY -SINCE 1846
53
CAST STEEL SWING CHECK VALVES
Fig 9061 J Idng"d
Fig 90b1 WE Welding ";ue~ J through d4 Above 8 data on Reque::.t
FEATURES
Th"::.,, valv,,::. can be used In honzontal or vertical posmon however when In::.tdlr..,d In vertlwl hne flow mu .. t ue upward with the pressure under the dl::'L
CLASS 900
BOLTED FLANGED CAP FLANGED and WELDING ENDS
PRESSUREITEMPERATURE RATINGS In dLLordanL" with ASME 81b ,,4
O .. !:>I"RIPTION MATLRIAL A"'IM "'pe",
Body I"drbon "'teel A ~lb brd(l.,. WLS
I"dP LdTbon "'te,,1 A J1J bldde 70
"'edt Ring :,teel/:'Ielhte rdt..mg A J I" bTdd" 101,J/l OlJ
Ol~t.. Ldrbon st, ... I131 t A llb bTdde WI"S
t.nrom, rdt..lIlg
Lamer H 0 Idur :,tdlOl ... ~~ :,t..el A ~ 17 bTdde LA1J
Ol~\' Nut "'tdlnle~~ steel t A ..J8l Typ v .:!O.:!
I"drrter J 10 :,tdml v ~~ Ste v 1 t A lib Typ v 410
bd~ket "'DUdl Wound Lommerual
Body :'Iud~ :,teel A 19.:1 Grdd" Bf
Bocly Nu(~ ::,("e( A 1.A {'rdd ... lH
01:'(' Nut Pm Stamless :,teel ("omm"Tt..ldl
Plug &tdllll...~~ :,te,,1 I A 17b lyp" 410
t Or LqU..l SPECIFICATIONS
Flang .... d and W",ldmg End valves have dimensions In accordance with ASfvlE Blb v Blb 10 and Blb d"
End flang ... t> are fumuh .... d with 1/4 ral~"d f«Le special end fl,mge::. are dvaiiabl ... on ::.p ... Lldl order
ORDERINC
Wh"n ord"nng other than standard Butt Welding End Valve:. ::.peLify schedule of pIp" and give complete data cone .... mmg ::.tyl ... figure number and contour of w ... ld "nd::.
DIMENSIONS (In{,hes)
:, 0 8 10th l4
0 1 ... 0(){...I<I~ V I v I rJy 1" 18 l4 ':'v
N 1" 18 l4 <'-v o t
A p, 1 ed f vJOI . ..I :, 9 l.h k ~ ~/8 11 9/10 L...f8 1r ...flo 0
VI :;, be! J h R~ t
0 T B :'v led
WEICHTS (Pound~)
F 9 vObl lOO " .... 0 840 1.300
F q vOblWI:; 100 l70 .,OV 10 .... 0 CLASS 1500
BOLTED FLANGED CAP FLANGED and WELDING ENDS
CAST STEEL SWING CHECK VALVES
PRESSUREITEMPERATURE RATINGS In accordance with ASME B16.34
MATERIALS DESCRIPTION
ASTM Spec.
MATERIAL
A-216, Grade WCB A-SiS, Grade 70
A-5i9, Grade 1015/1025 tA-216, Grade WCB
A-217, Grade CA15 A-582, Type 303
A-276, Type 410 Commercial
A-193, Grade B7
A-194, Grade 2H Commercial
t A-276t Type 410
Carbon Steel Carbon Steel SteeliStellite Facing Carbon Steel 13%
Chrome Facing Stainless Steel Stainless Steel Stainless Steel Spiral Wound Steel
Steel
Stainless Steel Stainless Steel
Body Cap
Seat Ring Disc
Carrier Holder Disc Nut Carrier Pin Gasket
Body Studs Body Nuts Disc Nut Pin Plug
t Or Equal
Fig. 1361 Flanged
Fig. 1361 WE-Welding Sizes, 2" through 12"
SPECIFICATIONS
• Flanged and Welding End valves have dimensions in accordance with ASME B16.S, B16.10 and B16.25
• End flanges are furnished with 1/4" raised face; special end flanges are available on special order
FEATURES
ORDERING
• When ordering other than standard Butt Welding End valves, specify schedule of pipe and give complete data concerning style, figure number and contour of weld ends
• These valves can be used in horizontal or vertical position; however, when installed in vertical line flow must be upward with the pressure under the disc
DIMENSIONS (Inches)
Sire 2 21/2 3 6 8 10 12
0 141/2 16112 181/2 21112 273/4 323/4 Data
N 141/2 16112 181/2 211/2 273/4 323/4 On
A 93/16 103/8 11 Sta 135/16 16318 2013/16 ReQuest
D To Be Specilied
WEIGHTS (Pounds)
I Fig. 1361 195 250 310 550 1000 2200
L--N-----..J Fig. 1361 WE 135 200 230 430 800 1900 55
; WM. POWELLCOMPANY-SJNCE 1846
CAST STEEL TILTING DISC CHECK VALVES CLASS 150-1500
BOLTED FLANGED CAP FLANGED and WELDING ENDS
PRESSUREITEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS (Carbon Steel)
DESCRIPTION ASTM Spec.
1 BODY A216-WCB
2 BONNET A216-WCB
3 DISC A216-WCB+41 0
4 HINGE PIN A479-410
5 BODY SEAT RING A576·1 020+41 0
6 COVER A105
7 GASKET GRAPHITE
8 COVER GASKET GRAPHITE
9 BONNET BOLT A193-B7
10 BONNET NUT A194-2H
11 BUSHING A479·304
15 COVER BOLT A193-B7
16 COVER NUT A194-2H
18 EYE BOLT A307-B SPECIFICATIONS
• Flanged and 8utt Welding End valves conform to ANSI 816.5,
816.10,816.25, 816.34 and API 600
DIMENSIONS (Inches)
CLASS 150 Fig. 1595FE, eWE
Size 2 2112 3 4 6 8 HI 12 14 16 18 20 24
L Face-Io-Face FE, WE 8 81/2 9112 11112 14 19112 24112 27112 31 34 33112 38112 51
H center-to-roo 61/4 6314 71/8 7112 9 11 133i8 151/8 15314 17 314 19 20518 23112
CLASS 300 Fig. 3095FE, eWE
Size 2 2112 3 4 6 8 10 12 14 16 18 20 24
L race-ie-race fE, WE 10112 11112 12112 14 17112 21 24112 28 33 34 38112 4G 53
H Center-to- Top 61/4 71/8 7112 8112 10112 12518 15 161/2 187/a 20112 211/4 22 3/4 271/8
CLASS 600 Fig. 6095FE, BWE
Size 2 2112 3 4 6 8 10 12 14 16 18 20 24
L Face-Io-Face FE. WE 11112 13 14 17 22 26 31 33 35 39 43 47 55
H center-tc-rcp 71/8 7112 81/4 10314 13314 161/8 17314 181/4 201/8 21 26 28112 321/4
CLASS 900 Fig. 9095FE, eWE CLASS 1500 Fig. 1395FE, BWE
Size 2 3 4 6 8 Size 2 3 6 8
L Face-to-Face FE. WE 14112 15 18 24 29 L Face-to-Faee FE. WE 14112 18112 21112 27314 32314
H Center-to-Top 10 112 10112 113/8 12 15118 181/8 H Center-la-Top 10112 11518 14 18114 211/4 THEWM. POWELLCOMPANY-$INCE 1846
56
CAST STEEL PRESSURE SEAL VALVES Gate· Globe • Angle· "Y" • Non-Return· Check
PRESSURE SEAL BONNET
WELDING ENDS
PRESSUREffEMPERATURE RATINGS
In accordance with ASME B16.34
CLASS 600-2500
POWELL PRESSURE SEAL VALVES ARE AVAILABLE IN THE FOLLOWING SIZES GATE VALVES
Flg. No. Class -Inches 2112 3 4 6 8 10 12 14 16 18 20 24
l6OO3WE €((I Gate · · · · · · · · .+ .+ .+ .+
19OO3WE 000 Gate · · · · · · · · .+ -+ .+ .+
l1303WE 1500 Gate · · · · · · · · .+ .+ "+ .+
120003WE 2COOGate · · · · · .+ .+ .+ .+
l25OO3WE 2500 Gate · · · · · · · .+ .+ .+ .+ .+ VENTURI VALVES ARE AVAILABLE· SIZES 6" and LARGER
+Handwheel actuated valve not available - Consult Powell Engineering for proper selection of Manual Gear or Power Actuator
• Indicates sizes in which valves are available
GLOBE- ANGLE- uY"_ NON-RETURN- CHECK- VALVES
FI~No. Oass and Type-lnches -. 2112 3 4 6 8 10 12 14 16 18 20
16031'M: €((I Gcl::aa Y Y U U YUT Y+ Y+ Y+ Y+ Y+
l6033WE €((IAA:Je · ·
l6084WE 00) Gcbe f\tn-PSum Y Y U U YU+ Y+ Y+ Y+ Y+ yo
l6086WE 6:X) ArrJe f\tn-PSum · · ·
16OO5WE 6:X) Uft QYi1d< .. Y Y U U Yu Y y Y Y Y
l6OO7WE 6:X) kt;je Uft O'le:::k · · ·
19m1'M: oc()Gcba y Y U U yU+ YUT y+ Y4- Y+ Y+
19033WE OC()Arrj.e · · · · "+ -+
19084WE OC() Gcba f\tn-PSum Y Y U U YU+ YU+ Y+ Y+ Y+ Y+
19O!!6\\£ OC() ArrJe f\tn-Rettm · · · · .+ .+
l0055'M: 9X) Uft QlEd< Y y U U Yu Yu Y y Y y
19OO7VVE OC() kYje Uft Ch€ck · · · · · ·
11331'M: 1500Gcba Y y Y Vu YU+ yU+ y+
11333\'1£ 1500Arde · · · · .+ .+
113S4'M; 1EOOGc:ba~ Y y y Yu yU+ yU+ y+
11386VVE 1500 An;:Je N:o-Rett.m. · · · · .+ .+
11365WE 1500 Uft 0'I€Ck Y Y Y Yu Yu Yu Y
11367WE 1500kgle Uft O'le:::k · · · · · · · .
i25ln1WE 25C()Gcba y Y Y y y+ y+ y+ y+ y+ y+
l25033WE 2500ArrJe · · ·
125084WE 2500 Gcba N::Jn.Retun y y Y Y y+ y+ Y+ y+ y.+ Y+
125()861M;. 2500 kf,je N::Jn.ROO.m · · ·
l25065WE 2500 Uft Q-e::k y y y y y y Y Y Y y
12500'7\\£ 2500 ArgIe Uft Oleck · · · · · · + Handwheel Actuated Valve Not Available - Consult Powell Engineering
for proper selection of Manual Gear or Power Actuator
• Indicates sizes in which valves are available U Upright Design
Y "Y" Design
Yu ''Y'' Design is standard, Upright Design is available if specified
THE WM. POWELL COMPANY -SINCE 1846
57
CAST STEEL
PRESSURE SEAL VALVES
Accurately machined Acme threads ----------prolong the life of the stem and bush ing.
Tapered roller bearings for ease of ----------~ operation.
Lifting lugs faciljtate hand))ng the valve --,
during erection and maintenance. Also provides means for supporting the weight of the valve.
Swing eyebolts and gland shelves -- ~
facilitate repacking.
Inner row of studs establish the initial ------..._ seal of the Pressure Seal Joint.
Outer row of studs secures the yokearm to the body.
The bonnet joint remains tight under all -- __
operating conditions as the sealing pressure is always many times greater that the pressure of the fluid in the line, thereby eJiminating leakage. The higher the internal pressure, the greater the sealing pressure.
Streamline contour of body simplifies -------- ... application and reduces cost of insulation, and effects marked savlngs in space and weight.
Stellited back seat area provides accurate guiding of stem.
Streamlined passage makes possible maximum flow with minimum turbulence.
Stellite faced flexible ~H" type wedge prevents sticking due to temperature changes and pipe line stresses.
Seal rings are Stellite securely welded in place.
THEWM. POWELLCClMPANY-SINCE 1846
58
CAST STEEL PRESSURE SEAL VALVES
Gate· Globe · Angle· "Y" . Non-Return · Check
DESIGN AND CONSTRUCTION
Powell Pressure Seal Valves are intended for high pressure, high temperature applications in all types of fluid except where severe coking is a factor.
The design and materials selections provide excellent service in fossil and nuclear steam generating stations, industrial and chemical plants, and refineries.
The Powell design Pressure Seal Valves provide the most efficient flow passage and sealing features possible resulting
in significant weight savings, ease of installation and maintenance features.
Manufacturing and quality assurance procedures include extra controls on dimensional, non-destructive examination and testing of critical areas such as the gasket seating, welding end and stellited seating surfaces.
BODY - Flow areas are designed for minimum turbulence and pressure drop. Casting and forging quality requirements are considered in the design of Powell Pressure Seal Valves. BONNET - Ample stuffing box and stellited stem guide and back seat shoulder are provided for accurate guiding of the stem and back seating.
WEDGE (Gate Valves) - Flexible wedge design on 4" and larger sizes provide flexibility to prevent sticking. Wedges are stellite faced and have machined guides for control of alignment during valve operation.
DISC (Globe & Check Valves) - Globe and check type discs are accurately fitted and guided to minimize vibration. Seating
surfaces are stellited. One piece stem and disc design are furnished on larger sizes.
SEAT RINGS - Seat rings are stellite faced, accurately fitted and seal welded in place.
YOKE DESIGN - Studs fasten the yoke directly to the valve body. The bolting and internal deSign features eliminate heavy clamp rings and provide rigidity, accurate alignment of the valve internal parts and operating mechanism. Lifting lugs on large size valves aid in installation and maintenance operation. STEM - Threads are accurately machined. Packing area is polished to reduce stem friction and packing wear.
Delta Pressure Seal Design
The Delta Seal Design is used in valves for pressures 2500 pound and higher and services which have drastic temperature variations. This exclusive double gasket design provides three sealing surfaces that contract and expand uniformly with the valve body eliminating body leaks. The 5° seat taper eliminates surface contact and possible damage to the gasket and seating surface of the valve during removal of the gasket. The Delta Seal Gasket can be easily removed for valve maintenance, reducing downtime appreciably. This results in more reliable operation of Powell Pressure Seal Valves.
THE WM. POWELL COMPANY -SINCE 1846
Standard Pressure Seal Design
The segmental thrust rings absorb all the thrust applied by internal pressure. A hardened stainless steel protective ring prevents deformation of the top surface of the soft metallic gasket. The 5° seat eliminates surface contact and possible damage to the gaskets and internal surface of the valve during removal of the gasket. The gasket can be removed freely without damaging the sealing surface of the body. The gasket seating surface in the body may be lapped, if required.
59
CAST STEEL PRESSURE SEAL GATE VALVES
Welding End Pressure Seal Gate Valve
Sizes, 2 1/2" through 4"
FEATURES
• Flexible "H" type wedge, which is stel1ite faced, prevents sticking when valves are closed hot
• Stellite faced Seat Rings are accurately machined, pressed and welded in place
• Stellite faced back seat area and stem guide insure tight sealing and accurate guiding of stem
• Yokearm design - studs and nuts hold the yokearm to the body. This eliminates the need of a heavy clamp. and maintains perfect alignment and rigidity of yokearm to the body
• Swing Eyebolts provide easy access to the packing chamber
• Body has a streamlined passage which produces maximum flow with minimum turbulence
• 2 1/2' & 3" Class 900 thru 2500 and 4· Class 1500 & 2500 furnished with AntiFriction bearings
THE WM. POWELL COMPANY - SINCE 1846
CLASS 600-2500
SMALL SIZE VALVES PRESSURE SEAL BONNET WELDING ENDS PRESSUREITEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec.
A·216, Grade WCB A·105
Body Bonnet
Yokearm Stem Wedge
Seat Ring
Carbon Steel Carbon SteeVSteltite
Integral Back Seat Carbon Steel Stainless Steel Carbon SteeVSteliite
Seat Facing SteeVSteUite Seat
Facing
Protective Ring Stainless Steel
Yokearm Face Ring Stainless Steel
Bonnet Take-Up Frange Chrome Moly Steel
Split Thrust Ring Stainless Steel
Gland Brass
Gland Flange Carbon Steel
Stem Bushing Bronze
Handwheel Malleable Iron
Key Steel
Stem Bushing Nut Malleable Iron
Gasket Soft Iron/Steel
Packing Grafoil
Segmental Thrust Ring Stainless Steel Lubricant Fitting Set Screw Eyebolts & Nuts Studs
Nuts
Groov-Pins
Bearing Cap Screws Stem Bushing
Thrust Washer Packing Washer Eyebolt Clamp
Stem Bushing Locknut Locknut
Take-Up Cap Screws Bearing Cap
Oil Seals
Bearing
t Or Equal
Steel Steel Steel Steel Steel Steel
Stainless Steel
Steel
Carbon Steel Brass Carbon Steel Steel
Slee!
A-216, Grade WCB
t A-182. Grade F6a A·216, Grade WCB
A-519, Grade 1015/1025
tA473, Type 416 t A473, Type 416 AISI4140
t A·473, Type 416 B·16
A-216. Grade WCB B-62
A-47. Grade 32510 A-W8, Grade 1015/1025 A-47, Grade 32510
commercat
t A-473, Type 416 CommerCial Commercial A-307, Grade B A-193, Grade B7 A-194, Grade 2H Oommerctat A-449
t A-473, Type 416
A-lOS, Grade 1015/1025 A-216, Grade WCB B-16
A-216. Grade WCB A-193, Grade B7 A-36
commerciai Commercial
SPECIFICATIONS
• 600 class valves have Diameter of bore equivalent to Schedule 80 pipe, and will be furnished unless otherwise specified.
. Contour ot weld ends to be the same as Figs. 2A or 3A, ASME B 16.25. Welding Bore can be fumished to meet customer's specflcatlons,
• Nominal pipe size, schedule of pipe, or bore or wall thickness, must be specified on 900 class valves and up, so that valve can be machined to match customer's pipe.
• When backing or chill rings are used, specific details must be given.
• End-to-end dimensions conform to ASM E 816.10
60
CAST STEEL PRESSURE SEAL GATE VALVES
Welding End Pressure Seal Gate Valve
Sizes, 6" and Larger
FEATURES
•
Flexible "H" type wedge, which is stellite faced, prevents sticking when valves are closed hot Stellite faced Seat Rings are accurately machined, pressed and welded in place Stellite faced back seat area and stem guide insure tight sealing and accurate guiding of stem
Yokearm design - studs and nuts hold the yokearm to the body. This eliminates the need of a heavy clamp, and maintains perfect alignment and rigidity of yoke to the body Swing Eyebolts provide easy access to the packing chamber
Body has a streamlined passage which produces maximum flow with minimum turbulence
Lifting lugs, an exclusive Powell feature, are cast on the yokearm of larger size valves to faCilitate handling during erection and in maintenance
600 and 900 class valves sizes 1S", 20· and 24" are available in forged and cast design
•
•
•
•
•
•
•
THE WM. POWELL COMPANY - SINCE 1846
CLASS 600-2500
LARGE SIZE VALVES PRESSURE SEAL BONNET WELDING ENDS
PRESSUREITEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIAL
ASTMSpec.
A-216, Grade WCB A-105
Body Bonnet
Carbon Steel Carbon SteeVStellite Integral Back Seat Carbon Steel Carbon SteeV Stellite Facing
SteeVStellite Seat Facing
A-519,
Grade 1015/1025 8·62
A-47, Grade 32510 A-36
t A-473, Type 416 t A-473, Type 416 t A-182, Grade F6a
A-108,
Grade 1015f1025 A-216, Grade WCB 8-16
A-216, Grade WCB
A-216, Grade WCB A-216. Grade WCB
Yokearm Wedge
Seat Ring
Slem Bushing Bronze
Stem Bushing Nut Malleable Iron
Bearing Cap Steel
Segmental Thrust Ring Stainless Steel
Protective Ring Stainless Steel
Stem Stainless Steel
Packing Washer Steel
Carbon Steel Brass
Carbon Steel Soft Iron/Steel Grafoil
Eyebolt Clamp Gland
Gland Flange Gasket
packing Bearings
Oil Seals lubricant Fitting Studs
Nuts
Key
Commercial Commercial Commercial Commercial A-193, Grade B7 A-194, Grade 2H A-1OS,
Grade 1015/1025 A-47. Grade 32510 A-449
A·307, Grade B Commercial A-193, Grade B7
tAISI4140
A-473, Type 416 A-216, Grade WCB
Steel Steel Steel
Handwheel Malleable Iron
Bearing Cap Screws Steel
Eyebolts & Nuts Steel
Groov-Pins Steel
Take-Up Cap Screws Steel
Bonnet Take-Up Flange Chrome Moly Steel
Split Thrust Ring Stainless Steel
Bearing Housing Carbon Steel
t OrEqual
SPECIFICATIONS
•
600 class valves have Diameter of bore equivalent to Schedule SO pipe, and will be furnished unless otherwise specified. Contour of weld ends to be the same as Figs. 2A or 3A, ASME B16.25. Welding Bore can be furnished to meet customer's specifications. Nominal pipe size, schedule of pipe, or bore or wall thickness must be specified on 900 class valves and up. so that valve can b~ machined to match customer's pipe.
When backing or chill rings are used, specific details must be given.
End-to-end dimensions conform to ASME 816.10 (except for 2000 class valves)
2500 class valves have Dena Seal Gasket.
•
•
•
•
61
CAST STEEL PRESSURE SEAL GATE VALVES WELDING ENDS
CLASS 600 through 2500
Gate -- Welding Ends Sizes, 2 1/2" - 4" 600 - 1500 Class
Gate -- Welding Ends Sizes, 6" and larger 600 - 1500 Class
DIMENSIONS (Inches)
Gate -- Welding Ends Sizes, 2 1/2" and 3" 2500 Class
Gate -- Welding Ends Sizes, 4" and 18" 2000 - 2500 Class
Size
21/2t 3t
30
4
6
8
10
12
14
16
18
20
22
24
600 Class N 81/2 10 12 18 23 28 32 35 39 43 47 - 55 65
Fig. 16003 WE A 207/8 235/8 303/8 423/4 501/4 561/2 685/8 733/8 81 7/8' 873/4' 941/2' - 1091/2" 138'
V 10 10 14 22 22 26 30 36 · · , - , .
900 Class N 10 12 14 20 26 31 36 39 43 48 52 - 61 -
Fig. 19003 WE A 241/8 23 331{4 443/4 467/8 57 657!8 723/4 80' 87314* 941/2' - 1091/2' -
V 14 10 18 22 26 30 30 30 · · , - · -
1500 Class N 10 12 16 22 28 34 39 42 47 53 58 64 66 -
Fig. 11303 WE A 241/8 25 263/4 443/8 535/8 621/4 68 741/2 98' lOS' 1231/4' 111' 116' -
V 14 14 14 26 30 30 30 36 · · , " · -
2000 Class N - - - 22 28 34 39 42 47 53 58 64 66 -
Fig. 120003 WE A - - 443/8 535/8 621/4 68 773/8 9S' 108' 1231/4' 111' 116' -
V - - - 26 30 30 30 36 · · . . · -
2500 Class N 13 141/2 18 24 30 36 41 44 49 55 62 - - -
Fig. 125003 WE A 241/8 25 39 431/8 533/4 631/2 673/4 903/8' 94' 1055/8' 98314" - - -
V 14 14 22 26 30 30 36 , · , . - - - t (900 Class) Size 3" valves have Solid Wedge
t (1500 Class) Size 2 1f2" and 3" valves have Sofid Wedge
600 and 900 Class valves size 18", 20" and 24" are also available in forged design
* Handwheel Actuated Valve Not Available - Consult Powell Engineering for proper selection of Manual Gear or Powered Actuator.
THE WM. POWELL COMPANY - SINCE 1846
62
CAST STEEL PRESSURE SEAL VENTURI GATE VALVES WELDING ENDS
CLASS 600 through 2500
A OPEN
Venturi Gate .- Welding Ends
DIMENSIONS (Inches)
8XbX8 10x8:1.10
12x1M2 14)(12x14 16;(14)(16 18)(16)(18 20x18::\20 24::\20)(24 24::\22::\24
600 Class N 18 23 28 32 35 39 43 52 -
Fig. 16003 WE A 423/4 501/4 561/2 685/8 733/8 81 7/8' 873/4' 941/2' ·
V 22 22 26 30 36 · · " ·
900 Class N 20 26 31 36 39 43 48 52 -
Fig. 10003 WE A 443{4 467{8 57 65 7/8 723/4 733/4* 87SW 941/2' -
V 22 26 30 30 30 · , , ·
1500 Class N 22 28 34 39 42 47 53 62 64
Fig. 11303 WE A 443/8 535/8 621/4 68 773/8 98" lOS' 94' 111'
V 26 30 30 30 36 , " " ,
2000 Class N 22 28 34 39 42 47 53 62 64
Fig. 120003 WE A 443/8 535/8 621/4 68 77 3/8 98' lOS' 983/4' nr
V 26 30 30 30 36 · · . ·
2500 Class N 24 30 36 41 44 49 55 62 ·
Fig. 125003 WE A 431/8 533/4 631/2 673/4 903/8" 94' 1055/S' 983/4' ·
V 26 30 30 36 , , · " - * Handwheel Actuated Valve Not Available - Consult Powell Engineering for proper selection of Manual Gear or Powered Actuator
THE WM. POWELL COMPANY - SINCE 1846
63
CAST STEEL PRESSURE SEAL "Y"
GLOBE VALVES
Pressure Seal "Y" Grobe Valve
FEATURES
• Discs are accurately fitted and guided to minimize vibration. Seating surfaces are stellited
• SteUite faced back seat area and stem guide insure tight sealing and accurate guiding of stem
• Yoke design - Studs fasten the yoke directly to the valve body. The bolting and internal design features eliminate heavy clamp rings and provide rigidity, accurate alignment of the valve internal parts and operating mechanism
• Body has a flow area that is designed for minimum turbulence and pressure drop
iHE WM. POWELL COMPANY - SINCE 1846
CLASS 600·2500 PRESSURE SEAL BONNET WELDING ENDS PRESSUREffEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec.
A-216, Grade WCB
Body
Bonnet
Yokearm Stem Disc
Disc Nut Protective Ring Packing Washer
Carbon SteeVlntegral Stellite Seat
(6" & smaller) Carbon SteeYSteliite
Integral Back Seat Carbon Steel Stainless Steel Stainless SteeU
Stellite Facing Stainless Steel Stainless Steel Steel
Yokearm Face Ring Stainless Steel Bonnet Take-Up Flange Chrome Nickel
Moly Steel Brass
Carbon Steel Stainless Steel Brass
Carbon Steel Nitralloy Rod Steel
Gland
Gland Flange Segmental Thrust Ring Stem Bushing Handwheel
Thrust Washer
Stem Bushing Nut
Gasket Packing Crossarm
Take-Up Cap Screw Lubricant Fitting
Set Screw
Eyebolts & Nuts Studs
Nuts
Groov-Pins
Split Thrust Ring Handwheel Retainer
Plate Seat Ring
t Or Equal
Soft I ron/Steel Gratoil Carbon Steel Steel
Steel
Steel
Steel
Steel
Steel Stainless Steel Steel
SteeliStellite Facing (Above 6" Size)
A-105
A-216, Grade WCB t A-182, Grade F6a t A-276, Type 410
t A-582, Type 416
t A-473, Type 416
A-108,
Grade 1 015/1 025
t A-473, Type 416 AISI4140
B-16
A-216, Grade WCB
t A-473, Type 416 B-16
A-216, Grade WeB Commercial
A-108,
Grade 1015/1025
Commercial
A-216, Grade WCB A-193, Grade B7 Commercial Commercial
A-307, Grade B A-193, Grade B7 A-194, Grade 2H Commercial
t A-473, Type 416 A-108,
Grade 101511025 A-519,
Grade 101511026
SPECIFICATIONS
• 600 class valves have Diameter of bore equivalent to Schedule 80 pipe, and will be furnished unless otherwise specified. Contour of weld ends to be the same as Figs. 2A or 3A, ASME B16.25. Welding Bore can be furnished to meet customer's specifications.
• Nominal pipe size, schedule of pipe, or bore or wall thickness, must be specified on 900 class valves and up, so that valve can be machined to match customer's pipe.
• When backing or chill rings are used, specific details must be given.
64
CAST STEEL PRESSURE SEAL "Y' GLOBE VALVES WELDING ENDS
CLASS 600 through 2500
·Y· Globe Valve
with Hammerblow Handwheel
DIMENSIONS (Inches)
·Y· Globe Valve Gear Operated
"Y" Globe Valve Motor Operated
Size
21/2 3
14
4
5
6
12
20
8
10
16
18
600 Class N · 10 12 15 - 34 39 42 47 53 58
Globe A - 241/8 273/4 29 . · 59 65 741/4 87 101 113
Fig. 16031 Y WE V 12' 16' 20' · .. ,. .. ., .. ..
900 Class N - 12 14 17 - · 34 39 42 47 53 58
Globe A · 243/4 301/2 29 - - 59 65 741/4 87 101 113
Fig. 19031YWE V · 16' 22' 20' . · " .. .. " .. ..
1500 Class N 10 12 16 19 273/4 323/4 39 441/2 - - - ·
Globe A 221/8 261/2 31 38 473/4 55 621/2 76 - - - ·
Fig. 11331Y WE V 12' W 22' 20'· 30" .. .. .. . . -
2500 Class N 13 14 18 . 273/4 323/4 39 441/2 491/2 541/2 601/2 ·
Globe A 22 7/8 261/2 301/8 - 47 561{2 571/2 761/8 845/8 957116 1005/8 -
Fig. 125031YWE V 14' 16' 20' . 30" .. " .. .. .. .. · • Hammerblow Handwheel
** Handwheel actuated Valve Not Available - Consult Powell Engineering for proper selection of Manual Gear or Powered Actuator
• Anti-Friction Bearing Yoke
THE WM. POWELL COMPANY - SINCE 1646
65
CAST STEEL PRESSURE SEAL UPRIGHT GLOBE and ANGLE VALVES
Pressure Seal Upright Globe Valve With Hammerblow Handwheel
FEATURES
• Disc are accurately fitted and guided to minimize vibration. Seating surfaces are steltited. One piece stem and disc design are furnished on larger size valves
• Seat Ring is stellite faced, accurately fitted and seal welded in place
• Stellite faced back seat and stem guide insure tight sealing and accurate guiding of stem
• Yoke design - Studs fasten the yokearm directly to the valve body. The bolting and internal design features eliminate heavy clamp rings and provide rigidity, accurate alignment of the valve internal parts and operating mechanism
• Body has flow area that is designed for minimum turbulence and pressure drop
• Lifting lugs, on larger size valves, aid in installation and maintenance operation
THE WM, POWELL COMPANY - SINCE 1846
CLASS 600-2500 PRESSURE SEAL BONNET WELDING ENDS PRESSUREITEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec.
Body Bonnet
A-216, Grade WCB A-105
Yokearm Stem Disc
Protective Ring Packing Washer
Retaining Ring Gland
Gland Flange Segmental Thrust Ring Gasket
Packing
Lubricant Fitting
Set Screw
Eyebolts and Nuts Studs
Nuts
Groov-Plns
Seat Ring
Key Bushing
Key
Carbon Steel Carbon SteeVStellite
Integral Back Seat Carbon Steel Stainless Steel SteelfStellite Facing Stainless Steel
Steel
Stainless Steel Brass
Carbon Steel Stainless Steel Soft I ronlSteel Grafoil
Steel Steel Steel Steel Steel
Steel/Stellite Facing
Steel
Steel
Bearings Oil Seals
Bearing Cap Carbon Steel
Disc Guide Carbon Steel
Hammerblow Handwheei Carbon Steel
Stem Bushing Bronze
Crossarm Carbon Steel
Stem Bushing Nut Steel
Handwheel Retainer Plate
Eyebolt Clamp
t Or Equal
Steel
Carbon Steel
A-216, Grade WCB t A-182, Grade F6a A-5i6, Grade 70
t A-473, Type 416 A-lOa,
Grade 1015/1025 t A-473, Type 416 B-16
A-216, Grade WCB t A-473, Type 416
Commercial Commercial Commercial A-307, Grade B A-193, Grade B7 A-194, Grade 2H Commercial A-519,
Grade 1015/1026 A-lOB,
Grade 1015/1025 A-1G8,
Grade 1 015/1025 Commercial Commercial
A-216, Grade WCB A-216, Grade WCB A-216, Grade WCB B·62
A-216, Grade WCB A-1G8,
Grade 1015/1025 A-l08,
Grade 1015/1025 A-216, Grade WCB
SPECIFICATIONS
• 600 class valves have Diameter of bore equivalent to Schedule 80 pipe, and will be furnished unless otherwise specified. Contour of weld ends to be the same as Figs. 2A or 3A, ASME B16.25. Welding Bore can be furnished to meet customer's specifications.
• Nominal pipe size, schedule of pipe, or bore or wall thickness, must be specified on 900 class valves and up, so that valve can be machined to match customer's pipe.
• When backing or chill rings are used, specific details must be given.
66
CAST STEEL PRESSURE SEAL GLOBE and ANGLE VALVES WELDING ENDS
CLASS 600 through 2500
Globe Valve
with Hammerblow Handwheel
Angle Valve
with Hammerblow Handwheel and Anti-friction Bearing Yoke
DIMENSIONS (Inches)
Size
21/2
3
4
5
6
8
10
12
600 Class N - 10 12 · 18 23 28t ·
Globe a · 6 7 81/2 10 . - ·
Fig. 16031 WE A - 243/4 27 · 35 423/4 50 ·
Angle B - 193/4 24 33 303/4 - · ·
Fig. 16033 WE V · 12' 16" 16' 20' 26" 30'· ·
900 Class N · · · · 20 26 31t 36t
Globe 0 - 6 7 81/2 10 13 151/2 18
Fig. 19031 WE A · · · · 411/4 521/2 50 591/4
Angle B · 211/8 253/8 28 373/4 46 481/2 591/4
Fig. 19033 WE V - 16 20' 20* 26*· 30*· •• "
1500 Class N · .. · · 22t 28t 34t ·
Globe 0 5 6 8 · 11 14 17 ·
Fig. 11331 WE A · · · · 44 50 621/2 ·
Angle B 181/2 211/4 255/8 · 371/2 50 591/4 ·
Fig. 11333 WE V 12' 16' 20' · 26'· ,. •• ·
2500 Class N · · · · · . · ·
Globe a 61/2 71/4 9 · · - - -
Fig. 125031 WE A - - - - · - · -
Angle a 203/4 241/2 291/4 - - - - -
Fig. 125033 WE V 14' 16' 20' - - - · - * Hammerblow Handwheel
** Handwheel actuated Valve Not Available - Consult Powell Engineering for proper selection of Manual Gear or Powered Actuator
t ~Y" Design is Standard, Upright Design is available jf specified • Anti-Friction Bearing Yoke
THE WM. POWELL COMPANY - SINCE 16%
67
CAST STEEL PRESSURE SEAL NON-RETURN "Y" GLOBE and ANGLE VALVES
Pressure Seal Non-Return "Y" Globe Valve
FEATURES
• Non-Return valves should always be mounted in a horizontal position with the stem pointing vertically upwards so the disc is free to close by gravity yet cushioned in the dash-pot
• Full floating, accurately guided discs.
Seating surfaces are stellited
• Stellite faced back seat area and stem guide insure tight sealing and accurate guiding of stem
• Yoke design - Studs fasten the yoke directly to the valve body. The bolting and internal design features eliminate heavy clamp rings and provide rigidity, accurate alignment of the valve internal parts and operating mechanism
• Body has flow area that is designed for minimum turbulence and pressure drop
• Equalizer helps reduce pressure drop and prevents wear producing disc vibration. An external pressure-balancing line connects the high pressure zone above the disc with the lower pressure area in the valve outlet. This reduces the pressure above the disc causing the higher pressure below the disc to raise it to full lift; also higher and quicker at low rates of low, thereby giving improved pressure drop characteristics
THE WM. POWELL COMPANY - SINCE 1846
CLASS 600-2500 PRESSURE SEAL BONNET WELDING ENDS PRESSUREfTEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS DESCRIPTION
MATERIAL
ASTM Spec.
Body
A-216, Grade WCB
Bonnet
Yokearm Stem Disc
Protective Ring Packing Washer
Carbon Steet!
Integral Stellite Seat (6" & smaller) Carbon Steel/Stellite
Integral Back Seat Carbon Steel Stainless Steel Stainless Steet!
Stellite Facing Stainless Steel Steel
Yokearm Face Ring Stainless Steel Bonnet Take-Up Flange Chrome Nickel
Moly Steel Stainless Steel Brass
Carbon Steel Stainless Steel Bronze Carbon Steel Steel
Split Thrust Ring Gland
Gland Flange Segmental Thrust Ring Stem Bushing Handwheel
Stem Bushing Nut
Gasket Packing Crossarm
Take-Up Cap Screw Lubricant Fitting
Set Screw
Eyebolts and Nuts Studs
Nuts
Graov-Pins Equalizer Handwheel Retainer
Plate Seat Ring
t Or Equal
Soft Iron/Steel Grafoil Carbon Steel Steel
Steel Steel Steel Steel Steel Steel Steel
Steet!Stellite Facing (Above 6" Size)
A-105
A-216, Grade WCB t A-182, Grade F6a t A-276, Type 410
t A-473, Type 416
A-10S,
Grade 1015/1025 t A-473, Type 416 AlSI4140
t A-473. Type 416 B-16
A-216. Grade WCB
t A-473, Type 416 B-62
A-216, Grade WCB A-lOS,
Grade 1015/1025
Commercial
A-216, Grade WeB A-193, Grade B7 Commercial Commercial
A-307, Grade B A-193. Grade B7 A-194, Grade 2H Commercial
A-l06, Grade B A-108,
Grade 1015/1025 A-519,
Grade 1015/1026
SPECIFICATIONS
• 600 class valves have Diameter of bore equivalent to Schedule 80 pipe, and will be furnished unless otherwise specified. Contour of weld ends to be the same as Figs. 2A or 3A, ASME B16.25. Welding Bore can be furnished to meet customer's specifications.
• Nominal pipe size, schedule of pipe, or bore or wall thickness, must be specified on 900 class valves and up, so that valve can be machined to match customer's pipe.
• When backing or chill rings are used, specific details must be given.
68
CAST STEEL PRESSURE SEAL NON·RETURN "Y" GLOBE VALVES
WELDING ENDS
CLASS 600 through 2500
Non-Return "Y" Globe Valve with Hammerblow Handwheel
DIMENSIONS (Inches)
Non-Return ''Y'' Globe Valve Gear Operated
Non-Return "Y" Globe Valve Motor Operated
Size
21/2 3
18
4
6
10
12
20
8
14
16
600 Class N - 10 12 - - 34 39 42 47 53 58
Non-Return 'Y' Globe Valve A - 225/8 273/4 - - 59 65 741/4 87 1011/4 113
Fig. 16084YWE V - 12 16 - - n .. •• .. W> ..
900 Class N - 12 14 - - 34 39 42 47 53 58
Non-Return 'Y' Globe Valve A - 243/4 301/2 - - 59 613/4 741/4 87 1011/4 113
Fig. 19084YWE V - lS' 22" - - .0 u *" .. 00 .,
1500 Class N 10 12 16 273/4 323/4 39 441/2 - - - "
Non-Return 'Y' Globe Valve A 215/8 243/4 30 1/2 47 55 621/2 76 - - - -
Fig. 11384Y WE V 12" 1S" 22" 30*· *" u ** - - - -
2500 Class N 13 141/2 18 273/4 323/4 39 441/2 491/2 541/2 601/2 -
Non-Return ·Y· Globe Valve A 227/S 261/2 333/8 47 561/2 571/2 761/8 845/8 957/16 1005/8 -
Fig. 125084Y WE V 14' 16" 20· 300• H H ** .. n ** - * Hammerblow Handwheel
*" Handwheel Actuated Valve Not Available - Consult Powell Engineering for proper selection of Manual Gear or Powered Actuator
• Anti-Friction Bearing Yoke
THE WM. f'OWELl COMPANY - SINCE 1846
69
CAST STEEL PRESSURE SEAL NON-RETURN UPRIGHT GLOBE and ANGLE VALVES
Pressure Seal Non-Return Upright Globe Valve
FEATURES
• Non-Return valves should always be mounted in a horizontal position with the stem pointing vertically upwards so the disc is free to close by gravity yet cushioned in the dash-pot
• Discs are full floating and accurately guided. Seating surfaces are stellited
• Seat Rings are stellite faced, accurately fitted and seal welded in place
• Stellite faced back seat area and stem guide insure tight sealing and accurate guiding of stem
• Yoke design - Studs fasten the yoke directly to the valve body. The bolting and internal design features eliminate heavy clamp rings and provide rigidity, accurate alignment of the valve internal parts and operating mechanism
• Body has flow area that is designed for minimum turbulence and pressure drop
• Lifting Lugs, on larger size valves, aid in installation and maintenance operation
THE WM. POWELL COMPANY - SINCE 1846
CLASS 600-2500 PRESSURE SEAL BONNET WELDING ENDS PRESSURElTEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec.
A-216, Grade WeB A-105
Gland Brass
Gland Flange Carbon Steel
Segmental Thrust Ring Stainless Steel
Body Bonnet
Yokearm Stem Seat Ring
Key
Protective Ring Retaining Ring Packing Washer
Stem Bushing Handwheel
Stem Busing Nut Gasket
Packing
Crossarm Lubricant Fitting Set Screw Eyebolts and Nuts Eyebolt Clamp Studs
Nuts
Disc Guide Disc
Key Bushing
Bearing Cap Graov-Pins Bearings Handwheel Retainer
Plate Oil Seals
t Or Equal
Carbon Steel Carbon SteeVStellite
Integral Back Seat Carbon Steel Stainless Steel Steef/Stellite Facing
A-216, Grade WCB t A-182, Grade F6a A-519,
Grade 1015(1026 A-10a,
Grade 1015/1025 t A-473 , Type 416
t A-473t Type 416 A-108,
Grade 101511025 B-16
A-216, Grade WCB
t A-473 , Type 416 B-62
A-216, Grade WCB x-tos, Grade 1020
Steel
Stainless Steel Stainless Steel Steel
Bronze Carbon Steel Steel
Soft I ron/Steel Grafoil Carbon Steel
Commercial
A-216, Grade WCB Commercial
Steel Steel
Carbon Steel Steel
Steel
Stainless Steel Carbon SteeV
Stellite Facing Steel
A-307, Grade B A-216, Grade WCB A-193, Grade B7 A-194, Grade 2H A-217. Grade CAI5 A-216, Grade WCB
A-lOB,
Grade 1015(1025 A-216, Grade WCB Commercial Commercial
A-lOB,
Grade 101511025 Commercial
Carbon Steel Steel
Steel
SPECIFICATIONS
• 600 class valves have Diameter of bore equivalent to Schedule 80 pipe, and will be furnished unless otherwise specified. Contour of weld ends to be the same as Figs. 2A or 3A, ASME B16.25. Welding Bore can be furnished to meet customer's specifications.
• Nominal pipe size, schedule of pipe, or bore or wall thickness, must be specified on 900 class valves and up, so that valve can be machined to match customer's pipe.
• When backing or chill rings are used, specific details must be given.
70
CAST STEEL PRESSURE SEAL NON·RETURN VALVES GLOBE and ANGLE WELDING ENDS
CLASS 600 through 2500
Non-Return Globe Valve Hammerblow Handwheel
Non-Return Angle Valve Hammerblow Handwhsel
Non-Return Globe Valve Gear Operated
Non-Return Angle Valve Motor Operated
DIMENSIONS (Inches)
Size 21/2 3 4 5 6 8 10 12
600 Class N 10 12 18 23 28t
Globe 0 6 7 81/2 10
Fig. 16084 WE A 243/4 27 35 423/4 58
Angle
Fig. 16086 WE B 193/4 24 33 303/4
V 12' 16' 16' 20' 26'- 30'-
900 Class N 20 26 31t 36t
Globe 0 6 7 81/2 10 13 151/2 18
Fig. 19084 WE A 411/4 521/2 50 591/4
Angle
Fig. 19086 WE B 211/8 255/8 28 373/4 46 481/2 591/4
V 16" 20· 20· 26·· 30··
1500 Class N 22t 28t 34t
Globe 0 5 6 8 11 14 17
Fig. 11384 WE A 44 50 621/2
Angle
Fig. 11386WE B 181/2 211/4 253/4 371/2 50 591/4
V 12' 16' 20- 26··
2500 Class N
Globe 0 61/2 71/4 9
Fig. 125084 WE A
Angle
Fig. 125086 WE B 203/4 241/2 291/4
V 14' 16· 20·
• Hammerblow Handwheel
•• Handwheel Actuated Valve Not Available - Consult Powell Engineering for proper selection of Manual
Gear or Powered Actuator
t "Y" Design is Standard, Upright Design is available if specified
• Anti-Friction bearing Yoke THE WM. POWELL COMPANY - SINCE 1846
71
CAST STEEL PRESSURE SEAL HORIZONTAL, ANGLE & "Y" LIFT CHECK VALVES
Pressure Seal Horizontal lift Check Valve
FEATURES
• Discs are accurately fitted and guided to minimize vibration. Seating surfaces are stellited
• Seat Rings are stelfite faced, accurately fitted and seal welded in place
• Body has flow area that is designed for minimum turbulence and pressure drop
THE WM. POWELL COMPANY - SINce 1846
CLASS 600 .. 2500
WELDING ENDS PRESSUREffEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION MATERIAL ASTM Spec.
Body Carbon Steel A-216, Grade WCB
Disc Carbon Steel/ A-216, Grade WCB
Stellite Facing
Seat Ring Steel/Stellite Facing A-519,
Grade 1015/1026
Protective Ring Stainless Steel t A-473, Type 416
Segmental Thrust Stainless Steel t A-473, Type 416
Ring t A-473 , Type 416
Segmental Retaining Stainless Steel
Ring
Disc Guide Stainless Steel A-217, Grade CA15
Cap Carbon Steel t A-105
Retainer Plate Steel A-36
Gasket Soft Iron/Steel
Studs Steel A-193, Grade B7
Hex Nuts Steel A-194, Grade 2H
Equalizer Pipet Steel A-106, Grade B
t Or Equal
t "Y" Lift Check Only SPECIFICATIONS
• 600 class valves have Diameter of bore equivalent to Schedule 80 pipe, and will be furnished unless otherwise specified. Contour of weld ends to be the same as Figs. 2A or 3A, ASME 816.25. Welding sore can be turrusned to meet customer's specifications.
• Nominal pipe size, schedule of pipe, or bore or wall thickness. must be specified on 900 class valves and up, so that valve can be machined to match customer's pipe.
• When backing or chill rings are used, specific details must be given.
72
CAST STEEL PRESSURE SEAL LIFT CHECK VALVES HORIZONTAL and ANGLE WELDING ENDS
CLASS 600 through 2500
Horizontal Lift Check Valve
Angle Lift Check Valve
DIMENSIONS (Inches)
Size 21/2 3 4 5 6 8 10 12 14
600 Class N - 10 12 18 23 28
Horizontal 0 - 6 7 81/2 10
Fig. 16065 WE A - 1(11/2 103/4 173/4 21 26
Angle
Fig. 16067 WE B 61/4 73/4 11 3/4 13
900 Class N 20 26 31
Horizontal 0 - 6 7 81/2 10 13 151/2
fig. 19065 WE A 181/2 221/4 251/2
Angle
Fig. 19067 WE B 6 83/4 91/2 111/2 16 16
1500 Class N 22 28 34
Horizontal 0 5 6 8 11 14 17 191{2 21
Fig. 11365 WE A - 161/2 201/4 231/4 273/4 321/4
Angle
fig. 11367 WE B 61{8 61{8 71/4 10 153/4 20 203/4 203/4
2500 Class N -
Horizontal 0 61/2 71/4 9 12 15 18
Fig. 125065 WE
Angle A -
Fig. 125067WE B 7 71/2 8 111/4 131/2 191/4 THE WM. POWELL COMPANY - SINCE 1846
73
CAST STEEL PRESSURE SEAL LIFT CHECK VALVES "Y" HORIZONTAL
WELDING ENDS
CLASS 600 through 2500
"Y" Horizontal Lift Check Valve Sizes, 4" and Smaller
"Y" Horizontal Lift Check Valve Sizes, 6" and Larger
DIMENSIONS (Inches)
Size 21/2 3 4 6 8 10 12 14 16 18 20
600 Class N - 10 12 34 39 42 47 53 58
Horizontal 'Y'
Fig. 16065Y WE A - 103/4 123/4 - 30 32 34 38 43 491/2
900 Class N - 12 14 34 39 42 47 53 58
Horizontal T
Fig. 19065Y WE A - 95/8 121/8 - 30 32 34 38 43 491/2
1500 Class N 10 12 16 273/4 323/4 39 441/2 -
Horizontal 'Y'
Fig. 11365Y WE A 93/8 95/8 121/8 181/2 269/16 30 30
2500 Class N 13 141/2 18 273/4 323/4 39 441/2 491/2 541/2 601/2 -
Horizontal 'Y'
Fig. 125065YWE A 121/2 15 171/4 271/2 30 33 36 38 42 45 THE WM. POWELL COMPANY - SINCE 1$46
74
CAST STEEL PRESSURE SEAL SWING CHECK VALVES
WELDING ENDS
Fig. 16061 WE Sizes, 2" through 24" Fig. 19061WE Sizes, 2" through 24" Fig. 11361WE Sizes, 2" through 24" Fig. 125061WE Sizes, 2" through 12"
:c
CLASS 600·2500
PRESSUAEITEMPERATURE RATINGS In accordance with ASME B16.34
MATERIALS (Carbon Steel)
DESCRIPTION ASTM Spec.
BODY A216WCB
COVER A216WCB
ARM A216WCB
BODY SEAT RING C/S1020+STL No.6
DISC A216WCB+STL NO.6
RETAINER A479-410
PIN A479-410
DISC NUT A194GrB
PLUG A307B
GASKET SOFT STEEL
COVER CLAMP BOLT A193 B7
NUT A194-2H
ADAPTER RING A479-410
COVER CLAMP C/S1045
SEALING BOLT A479-410
GASKET RING SOFT STEEL
EYE BOLT Al05
WASHER A479-410
SPUT PIN A580-304
SEALING NUT A 194-2H
PLUG BOLT A307B
COVER NUT A 1 94-2H
COVER A216WCB
BONNET A216WCB
DIMENSIONS (Inches)
Size
3
24
2
4
6
8
10
12
14
16
18
20
Class 600 l 7 10 12 18 23 28 32 35 39 43 47 55
Fig. 16061WE H 71/2 93/4 121/8 143/8 161/8 183/8 201/8 221/8 243/8 261/2 283/4 30 7/8
Class 900 l 81/2 12 14 20 26 31 36 39 43 48 52 61
Fig. 19061WE H 91/2 91/2 133/8 153/4 181/8 21 24 27 293/4 325/8 353/8 381/4
Class 1500 l 81/2 12 16 22 28 34 39 42 47 601/2 651/2 761/2
Fig.11361WE H 95/8 113/4 133/4 16 191/4 225/8 267/8 295/8 315/8 341/2 367/8 405/8
Class 2500 L 11 141/2 18 24 30 36 41 - - - - -
Fig. 125061WE H 101/4 133/4 16 173/4 201/2 235/8 27 - - - - - THE WM. POWELL COMPANY - SINCE 1846
75
CAST STEEL PRESSURE SEAL TILTING DISC CHECK VALVES
WELDING ENDS
Class 600,900 & 1500
: Size 4 & Under Class 2500 : Size 3 & Under
H
Flanged End Valves Available on Special Order
1 BODY
2 BONNET
3 DISC
4 HINGE PIN
5 BODY SEAT RING
6 COVER
7 GASKET
8 COVER GASKET
9 BONNET BOLT
10 BONNET NUT 11 BUSHING
12 BONNET CLAMP 13 RETAINER
14 ADAPTER RING 15 COVER BOLT 16 COVER NUT
17 HINGE PIN NUT 18 EYE BOLT
19 BONNET NUT
A216-WCB A216-WCB A216-WCB+STL A479-410 A576-1020+STL A105
SOFT STEEL SOFT STEEL A193-B7
A194-2H
A479-304 A576-1045 A576-1020+ZnPlat. A576-1020+ZnPlat, A193-B7
A194-2H
A194-2H
A307-B
A194-2H
CLASS 600-2500
PRESSUREITEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS (Carbon Steel)
DESCRIPTION
ASTM Spec.
SPECIFICATIONS
• Flanged and Butt Welding End valves conform to ANSI B16.5, B16.10, 816.25, 816.34 and API 600
DIMENSIONS (Inches)
S8
E
CLA 600 Fig. 16095W
Size 2 21/2 3 4 6 8 10 12 14 16 18 20 24
l 7 81/2 10 12 18 23 28 32 35 39 43 47 55
H 71/2 77/8 81/4 93/8 105/8 12 135/8 161/8 173/4 201/8 213/4 231/4 253/8 CLASS 900 Fig. 19095WE
Size 2 21/2 3 4 6 8 10 12 14 16 18 20 24
L 81/2 10 12 14 20 26 31 36 39 43 48 52 61
H 55/8 8 9 97/8 115/8 131/8 151/8 181/8 191/2 217/8 227/8 243/8 273/8 C SS
F WE
LA 1500 Ig.11095
Size 2 21/2 3 4 6 8 10 12 14 16 18 20 24
L 81/2 10 12 16 22 28 34 39 42 47 601/2 651/2 761/2
H 75/8 81/8 9 97/8 10 lJ4 113/4 157/8 19 201/8 22l!4 231/4 243/8 287/8 C SS
F 2 09 WE
LA 2500 Ig. 1 5 5
Size 2 21/2 3 4 6 8 10 12 14 16 18
L 11 13 141/2 18 24 30 36 41 44 49 55
H 71/4 77/8 93/8 97/8 113/4 145/8 165/8 211/4 227/8 201/2 243/4 THE WM. POWELL COMPANY - SINCE 1846
76
CAST STEEL VALVES with BY·PASS
GATE • GLOBE • ANGLE • NON~RETURN CLASS 150 • 300 • 600 • 900 • 1500 • 2000 • 2500
Welding End Gate Valve With By-Pass
Powell Cast Steel Valves can be furnished with By-Passes in sizes shown on the following page. By-Passes are suitable for equalizing the pressure around main control valves used on steam and other fluids. The By-Pass unit has all connections socket welded to make a strong tight joint.
When valves are ordered with By-Pass, the By-Pass unit shall be attached at the side of the main valve with the stems of both valves parallel, pointing vertically upward as illustrated. By-Pass valves may also be attached to the bottom of the main valve, with stem of the By-Pass valve at right angle to the main valve stem. If By-Pass valve is to be attached in any special location, a sketch must accompany the order.
GATE VALVE FIGURE NUMBERS
Flanged Ends Bolted Bonnet Fig. i5i3-Class 150 Fig. 30l3-Class 300 Fig. 60l3-Class 600 Fig. 9013-Class 900 Fig. 1313-Class 1500
Welding Ends Bolted Bonnet
Fig. l513WE-Class 150 Fig. 30l3WE-Class 300 Fig. 6013WE-Class 600 Fig. 9013WE-Class 900 Fig. 1313WE-Class 1500
Welding Ends Pressure Seal Bonnet Fig. 16013WE-Class 600 Fig. 1901SWE-Class 900 Fig. 11S13WE-Class 1500 Fig. l20013WE-Class 2000 Fig. 125013WE-Class 2500
GLOBE VALVE FIGURE NUMBERS
Flanged Ends Bolted Bonnet Fig. 1541-Class 150 Fig. S041-Class 300 Fig. 6041-Class 600 Fig. 9041-Class 900 Fig. 1341-Class 1500
Welding Ends Bolted Bonnet
Fig. 1541 WE-Class 150 Fig. 3041 WE-Class 300 Fig. 6041WE-Class 600 Fig. 9041WE-Class 900 Fig. 1341WE-Class 1500
Welding Ends Pressure Seal Bonnet Fig. 16041 WE-Class 600 Fig. 19041WE-Class 900 Fig. 11341 WE-Class 1500 Fig. 125041 WE-Class 2500
ANGLE VALVE FIGURE NUMBERS
Flanged Ends Bolted Bonnet Fig. 154S-Class 150 Fig. 3043-Class sao Fig. 6043-Class 600 Fig. 9043-Class 900
Welding Ends Bolted Bonnet
Fig. 1543WE-Class 150 Fig. 3043WE-Class 300 Fig. 6043WE-Class 600 Fig. 9043WE-Class 900
THE WM. POWEll COMPANY - SINCE 1846
rr
Welding Ends Pressure Seal Bonnet Fig. 16043WE-Class 600 Fig. 19043WE-Class 900 Fig. 11343WE-Class 1500 Fig. 125043WE-Class 2500
CAST STEEL VALVES with BY·PASS
CLASS 150 • 300 • 600 • 900 • 1500 • 2000 • 2500
One-Valve By-Pass
Two-Valve By-Pass
One-Valve By-Pass with Drain Valve
Two-Valve By-Pass with Drain Valve
BY-PASS SIZES AND CLEARANCE DIMENSIONS-BOLTED BONNET (Inches)
Size of Valve 4 6 8 10 12 14 16 18 20 24
Size 01 fuo-Pass 1/2 3/4 3/4 1 1 1 1 1 1 1
150 Class M - FE - - 171/2 1913116 211/8 231/8 233/4 251/8 251/2 283/4
M-W.E. - - 187/8 207/8 2113116 241/2 259/16 2513/16 267/8 30
C - H. - - 233/8 2611/16 28 30 305/8 32 323/8 355/8
BUill-uP C - WE - - 243/4 273/4 2811/16 313/8 327/16 3211116 333/4 367iS
By-Passes for Use 300 Class M - - 1813116 2013/16 221/8 243/4 253/4 271/4 281/2 311/8
with Main Valves C - - 2411/16 2711/16 29 315/8 325/8 341/8 353/8 38
Approximate 600 Class M 167/8 193/8 201/2 241/4 251/4 26 267/8 303/4 303/4 -
Clearance. Inches C 22 253/8 26H2 31 32 323/4 335/8 371/2 371/2 -
900 Class M 16718 191/2 205/8 241/4 253/8 261/8 271/4 301/8 - -
C 221/8 251/2 26518 31 321/8 327/8 34 367/8 - -
1500 Class M 17 195/8 203/4 241/4 253/8 - - - - -
C 223/8 253/4 26718 311/8 323/8 - - - - - BY-PASS SIZES AND CLEARANCE DIMENSIONS-PRESSURE SEAL BONNET (Inches)
Size of Valve 4 6 8 10 12 14 16 18 20 24
Size of ~-Pass 1/2 3/4 3/4 1 1 1 1 1 1 1
600 Class M 17 245/8 251/2 275/8 29118 301/8 291/2 293/4 31 331/4
C 231/2 325/8 331/2 35718 371/4 381/4 375/8 377/8 39118 413/8
BUilt-up 900 Class M 17 241/2 251/8 271/2 281/2 295/8 29 301/2 311/2 333/4
By-Passes for Use C 231/2 321/2 331(4 355/8 36518 373/4 37118 385/8 395/8 417/8
wilh Main Valves 1500 Class M 17 241/2 255/8 281{4 28 283/4 297/8 - - -
Approximate C 231/2 321(2 333/4 363/8 361/8 367/8 38 - - -
Clearance. Inches 2500 Class M
C } Dimensions on Request THE WM. POWELL COMPANY - SINCE 1846
78
THE WM. POWELL COMPANY - SINCE 1846
CAST STEEL MOTOR .. ACTUATED VALVES FIGURE NUMBERS
BOLTED and PRESSURE SEAL BONNETS
All Powell Cast Steel Gate, Globe, Angle and Non-Return Valves may be obtained with motor operators. Existing hand actuated valves can be fitted for motor operation.
Please specify the following figure numbers for respective motor actuated valves:
Flanged Welding
150 CLASS Ends Ends
Gate Valve-Bolted Bonnet 1523 1523 WE
Globe Valve-Bolted Bonnet 1551 1551WE
Angle Valve-Bolted Bonnet 1553 1553 WE
300 CLASS
Gate Valve-Bolted Bonnet 3023 3023WE
Globe Valve-Bolted Bonnet 3051 3051 WE
Angle Valve-Bolted Bonnet 3053 3053 WE
600 CLASS
Gate Valve-Bolted Bonnet 6023 6023 WE
Globe Valve-Bolted Bonnet 6051 6051 WE
Angle Valve-Bolted Bonnet 6053 6053 WE
Gate Valve-Pressure Seal Bonnet 16023 WE
Globe Valve-Pressure Seal Bonnet 16051 WE
Angle Valve-Pressure Seal Bonnet 16053 WE
900 CLASS
Gate Valve-Bolted Bonnet 9023 9023 WE
Globe Valve-Bolted Bonnet 9051 9051 WE
Angle Valve-Bolted Bonnet 9053 9053 WE
Gate Valve-Pressure Seal Bonnet 19023 WE
Globe Valve-Pressure Seal Bonnet 19051 WE
Angle Valve-Pressure Seal Bonnet 19053 WE
1500 CLASS
Gate Valve-Bolted Bonnet 1323 1323 WE
Globe Valve-Bolted Bonnet 1351 1351 WE
Gate Valve-Pressure Seal Bonnet 11323 WE
Globe Valve-Pressure Seal Bonnet 11351 WE
Angle Valve-Pressure Seal Bonnet 11353 WE
2500 CLASS
Gate Valve-Bolted Sonnet 25023 25023 WE
Gate Valve-Pressure Seal Bonnet 125023 WE
Globe Valve-Pressure Seal Bonnet 125051 WE
Angle Valve-Pressure Seal Bonnet 125053 WE For additional Motor Actuated Valve Information see page 136
79
CORROSION RESISTANT VALVES
GENERAL INDEX
METAL and ALLOY DESIGNATIONS. STANDARDS and SPECIFICATIONS.
PAGE .81
.81
GATE VALVES
Class 200 Screwed-in Bonnet .
Class 150-200 O.S. & Y .
Class 300 0.8. & Y.
Class 600 O.S. & Y.
.82
. 83,84 ·85
. ·86
GLOBE VALVES
Class 200 Union Bonnet. . . . . . . . . . . .. 87
Class 150-200 O.S. & Y. . . . . . . . . . . .. 88,89
Class 300 O.S. & Y 90,91
Class 600 O.S. & Y , " .92
3000 PSI Needle Globe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
CHECK VALVES - SWrNG CHECK
200 WOG Screwed-in Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Class 150-200 Bolted Cap 94,95
Class 300 Bolted Cap . . . . . . . . . . . . 96
Class 600 Bolted Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
CHECK VALVES - HORIZONTAL LIFT
Class 150-200 Bolted Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Class 300 Bolted Cap . . . . . . . . . . . . . . . . . . . . 99 Class 600 Bolted Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
FLUSH BOTTOM TANK VALVES Class 150.
Class 300.
Class 600.
.101,102 .103 .104
MOTOR OPERATED VALVES .
HYDRAULIC, PNEUMATIC OPERATED VALVES .
.135 . .136
Powell Corrosion Resistant Valves are available in standard to highly specialized designs, for example, NACE (National Association of Corrosion Engineers). etc. Standard Corrosion Resistant Valves contain PTFE with a service temperature limit of 450°F. Packing and Gaskets for higher temperature service are available on request.
THE WM. POWEll COMPANY - SINCE 1846
80
METAL and ALLOY DESIGNATIONS FOR CORROSION RESISTANT VALVES
ALLOYS TYPE A.S.T.M. Designation
Stainless:
CF-3 304L A351 , Grade CF-3
CF-8 304 A351 , Grade CF-8
CF-3M 316L A351 , Grade CF-3M
CF-8M 316 A351 , Grade CF-SM
CN-7M Alloy 20 A351, Grade CN-7M
CD-4MCu Duplex A35i, Grade CD-4MCu
Nickel:
Nickel Nickel A494, CZi00
Nickel B160
Nickel Copper Monel A494, M35-1 and M35-2
Monel 8164, UNS N04405
Monel B164, UNS N0440D
Nickel-Molybdenum Hastelloy B A494, Grade N-12M
Hastelloy B B335, UNS N10665
Nickel-Molybdenum-Chromium Hastelloy C B574
Hastelloy C A494, Grade CW12-MW Other Alloy Materials Available
FUGITIVE EMISSIONS OPTIONS
Powell standard design corrosion resistant valves are designed and manufactured to meet Level 1-500 ppm maximum fugitive emissions. LevellHOO ppm maximum emissions - is optionally available.
STANDARDS and SPECIFICATIONS
dimensional standards and requirements for piping system.
In the interest of uniformity and safety for the consumer, a number of national organizations have developed and published Standards and Specifications. These standards and specifications prescribe the rules and regulations for the construction of boilers and pressure vessels, including valves and safety appliances, specifications for materials,
Powell Corrosion Resistant Valves and Engineering Speclallties, wherever applicable, conform to the requirements set forth in the publications (latest editions) of the foHowing associations.
API - American Petroleum Institute Specifications
MSS - Manufacturers' Standardization Society of the Valve and Fittings Industry
Standard Practices
ASME - American Society of Mechanical Engineers
Boiler Construction and Unfired Pressure Vessel Code
ANSI - American National Standards Institute
ASTM - American Society for Testing Materials
Material Specifications
NACE - National Association of Corrosion Engineers
THE WM. POWELL COMPANY - SINCE 1846
81
CORROSION RESISTANT GATE VALVES
Fig. 1832
Threaded Sizes, 1/4" through 2"
FEATURES
• Fully guided Solid Wedge
• Integral Seats
• Socket and Butt Welding End valves are available
CLASS 200
SCREWED-IN BONNET
INSIDE SCREW RISING STEM THREADED ENDS
PRESSUREffEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec.
Handwheel Nut Identification Plate Handwheel
Stem
Packing Gland Packing Nut Packing Packing Collar Bonnet Wedge
Body
Steel Aluminum Malleable Iron Stainless Steel Stainless Steel Stainless Steel PTFE Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Commercial Commercial
A-47, Grade 32510 A-276, Type 316 A-276, Type 316 A-276, Type 316 Commercial
A-276, Type 316 A-351 , Grade CF8M A-3S1, Grade CF8M A-3S1, Grade CF8M
ORDERING
• Other AllOyS are available on special order
• Socket Welding End valves use Threaded End figure number with suffix S.w.E.
DIMENSIONS (Inches)
Size 1/4 3fS 1/2 3/4 1 11/4 11/2 2
A (T .E., S.w£) 13/4 2 21/4 21/2 31f4 31/2 33/4 4
G 49/16 49/16 51f4 611/16 713f16 91f4 101/2 125/8
H 21/2 21/2 23/4 3 31/4 35/8 41f16 43f4
WEIGHTS (Pounds)
Fig. 1832 .S .8 1.3 2.1 3.3 4.5 6.2 10.4
Fig. 1832 THE WM. POWELL COMPANY - SINCE: 1846
82
CORROSION RESISTANT GATE VALVES
Class 200 Threaded
Sizes, 1/4" through 2" Solid Wedge Fig. 2490 Split Wedge Fig. 2494
Class 150 Flanged
Sizes, 1/2" through 2" Fig. 2491
Fig. 2495
For Sizes, 2 1/2" through 48" See Fig. 2456, page 84
FEATURES
• Fully guided Solid Wedge
• Integral Seats
• Yoke bushing can be lubricated to minimize friction and prolong life of the stem
• Gasket completely nested in the valve neck flange
• Valves are available with Socket or Butt Welding Ends
• Split Wedges are available on order and are interchangeable with Solid Wedges
DIMENSIONS (Inches)
CLASS 150-200
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM THREADED and FLANGED ENDS
PRESSUREffEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec.
Stainless Steel Stainless Steel Steel Aluminum Malleable Iron Steel
Stainless Steel Steel
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel PTFE Stainless Steel Stainless Steel PTFE Stainless Steel Stainless Steel
A-5S2, Type 416 A-5S2, Type 416 Commercial Commercial
A-47, Grade 32510 Commercial
A-351 , Grade CFSM Commercial
A-276, Type 316 300 Series
300 Series
300 Series
300 Series Commercial
A-193, Grade B8 A-194, Grade S Commercial
A-351 , Grade CFSM A-351 , Grade CF3M
Yoke Bushing
Yoke Bushing Locknut Headless Set Screw Identification Plate Handwheel Handwheel Key
Yoke
lubricant Fitting Stem
Gland Eyebolt Nut Gland Eyebolt
G land Eyebolt Pin Gland Flange Packing
Yoke Bolt
Yoke Bolt Nut Gasket
Body (FE)
Body (T.E., S.W.E., B.W.E.)
Wedge
Gland Follower
Stainless Steel Stainless Steel
A-351 , Grade CFSM A-276, Type 316
SPECIFICATIONS
• Flanges End valves have end flanges in accordance with ASME B16.5
• Face-to-face dimensions conform to ASME B16.10
ORDERING
• Other Alloys are available on special order
• Socket Welding End valves use Threaded End figure number with suffix S.W.E.
• Butt Welding End valves use Flanged End figure number with suffix B.W.E.
• When ordering Butt Welding End valves, specify schedule of tubing or pipe end, and give complete data concerning style, figure number and contour of weld ends
Size 1/4 3/8 1/2 3/4 11/4 11/2 2 2 1/2 through 48"
A 21/8 2118 3 31/2 4 45/8 45/8 5 FOR
C 41/4 45/8 5 51/2 61/2 7* DATA
G 61/2. 6112 713/16 85/8 97/16 103/4t 121/8 14114 SEE
H 3 3 31/2 4 41/2 5; 6 7 PAGE 84
t 121/8 for (U .. S,W.E.) • 8 1/2 lUI {B.W.E.} t 6 for (T .E., S.w .E.)
WEIGHTS (Pounds)
Fig. 2490 3 3.5 4.8 6.5 9 14.4 18 24.3
Fig. 2490 Fig. 2491 6 8.4 12.5 18.4 23.9 33.9
Fig. 2491 THE WM. POWEll COMPANY - SINCE 1846
83
CORROSION RESISTANT GATE VALVES
Fig. 2456
One-piece YOke Sizes, 21/2" through 10·
Fig. 2456
Separate Yoke Arms Sizes, 12" through 4S"
Above 24" Data on Request
FEATURES
• Flexible Wedge sizes 3" through 48"
• Integral Seats
• Separate yoke arms are furnished on valve sizes 12· through 48"
• Butt Welding End valves are available on order
• Other alloys are available on special order
ORDERING
• Butt Welding End valves use Flanged End figure number with suffix B.W.E.
• When ordering Butt Welding End valves, specify schedule of tubinq.or pipe end, and give compfete data concerning style, figure number and contour of weld ends
CLASS 150
BOLTED FLANGED YOKE~BONNET OUTSIDE SCREW RISING STEM FLANGED ENDS
PRESSUREITEMPERATURE RATINGS In accordance wIth ASME 816.34
MATERIALS
DESCRIPTION MATERIAL ASTMSpec.
Stem Bushing Nut Malleable Iron A-47, Grade 32510
(8' & Up)
Handwheel Key Steel Commercial
Handwheel Malleable Iron A-47, Grade 32510
Stem Bushing (S" & Up) Bronze B-62
Lubricant Fitting Steel Commercial
Yoke arm Bolts" Stainless Steel A-582, Type 303
Yokearm' Stainless Steel A-351 , Grade CFSM
Yokearm Nuts· Slainless Steel A-278, Type 316
Eyebolt Stainless Steel 300 Series
Gland Flange Stainless Steel 300 Series
Eyebolt Nut Stainless Steel 300 Series
Gland Follower Stainless Steel A-276t Type 316
Packing PTFE Commercial
Gasket PTFE'" Commercial
Stem Stainless Steel A-276, Type 316
Body (F.E.) Stainless Steel A-351, Grade CF8M
(B.W .. E.) Stainless Steel A-351 , Grade CF3M
Wedge Stainless Steel A-351 , Grade CFSM
Stem Bushing Stainless Steel A-582, Type 416
(2112"-6")
Stem Bushing Stainless Steel A-582, Type 416
Locknut (2 1/2"-6")
Headless Set serew" Steel Commercial
Identification Plate·· Aluminum Commercial
Yoke Stainless Steel A-351, Grade CF8M
Eyebolt Pin Stainless Steel 300 Series
BodyIYoke Bolt Stainless Steel A-193, Grade BS
Body Yoke Nuts Stainless Steel A-194, Grade S
• 12" and Up
.. 2 112" through 10"
••• 8" and larger, glass filled PTFE
SPECIFICATIONS • Flanges valves have end flanges in accordance with A8ME 16.5
• Face-to-face dimensions conform to ASME 816.10
DIMENSIONS (Inches)
Size 1/4102 21/2: 3 4 6 S 10 12 14 16 18 20 24 3OIl1ru 48
e(f.E.) see 71/2 8 S 101/2: 111/2: 13 14 15 16 17 18 20 DATA
C{B.W.E.) S 1/2 111/8 12 157/8 161/2 18 193/4 221/2 24 26 28 32 ON
G page 147116 161/8 20 281116 371/2 481/4 573/4 64 743/8 845/16 92 99 REQUEST
H 83 7 7 9 11 14 16 18 22 22 24 24 26
WEIGHTS (Pounds)
Fig. 2456 39.1 52 88 146 224 332 464 650 862 1550 2000 2650
Fig.2456 THE WM. POWELL COMPANY - SINCE 1846
84
CORROSION RESISTANT GATE VALVES
Fig. 2467 Flanged
Sizes, 1/2' through 30' Above 12" Data on Request
Fig. 2466 Threaded Sizes, 1/4" through 2"
ORDERING
• Other Alloys are available on special order
• Socket Welding End valves use Threaded End figure number with suffix S.W.E.
• Butt Welding End valves use Flanged End figure number with suffix B.W.E.
• When ordering Butt Welding End valves specify schedule of tubing or pipe end, give complete data concerning style, figure number and contour of weld ends
CLASS 300
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM THREADED and FLANGED ENDS
PRESSUREITEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec.
Body (F. E.)
Body (T.E., S.W.E., B.W.E.) Bonnet
Yokearm (S" & Up) Gland
Wedge
Stem
Handwheel
Stem Bushing (8" & Up) (1/4" - 6")
Stem Bushing Nut (1/4" - 6")
(S" & Up) Handwheel Key Gasket
Packing Lubricant Fitting Gland Flange
Yokearm Bolts (S" & Up) Yokearm Nuts (8" & Up) Eyebolts
Eyebolts Nuts
Body Studs
Body Nuts
Groov-Pin
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Malleable Iron Bronze Stainless Steel Stainless Steel Malleable Iron Steel
PTFE
PTFE
Steel
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
A-351 , Grade CFSM A-351 , Grade CF3M A-351 , Grade CFSM A-35i, Grade CFSM A-276, Type 316 A-351 , Grade CF8M A-276, Type 316 A-47, Grade 32510 B-62
A-5S2, Type 416 A-582, Type 416 A-47, Grade 32510 Commercial Commercial Commercial Commercial
300 Series
300 Series
300 Series
300 Series
300 Series
A-193, Grade B8 A-194, Grade 8 300 Series
85
SPECIFICATIONS
• Flanged valves have end flanges in accordance with ASME B16.5
• Face-to-face dimensions conform to ASME B16.10
FEATURES
• Fully guided Flexible Wedge sizes 3" through 12"
• Integral Seat
• Socket and Butt Welding End valves are available
THE WM. POWEll COMPANY - SINCE 184$
DIMENSIONS (Inches)
Size 1/4 318 112 3/4 1 114 1112 2 2112 3 4 6 8 10 12 14thru30
A (T.E .. S.W.E.) 21/8 21/8 3 3112 4 45/8 45/8 5
C (F.E.. aW.E.) 5112 6 6112 7 71/2 8112 9112 111/8 12 157/8 161/2 18 193/4 DATA
G 6112 61/2 77/8 87/8 97f16 10314 121/8 14114 147/16 161/8 20 28 9/16 39 318 491/4 57718 ON REQUEST
H 3 3 3112 4 41/2 St 6 7 7 9 10 14 17 22 22
t 6 for (T.E .. S.W.E.)
WE(GHTS (Pounds)
Rg.2466 3.4 3.4 4.6 6.1 9.1 13.5 18 28.9
Fig. 2466 Rg.2467 7.3 11.2 15.4 27.2 33.1 37.5 50.4 95 157 270 420 70S 1020
Flg.2467 CLASS 600
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM THREADED and FLANGED ENDS
CORROSION RESISTANT GATE VALVES
PRESSUREfTEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS DESCRIPTION
ASTM Spec.
MATERIAL
A-582, Type 416 A-582, Type 416 Commercial Commercial
A-47, Grade 32510 Commercial
A-351 , Grade CF8M Commercial
A-276, Type 316 300 Series
300 Series
300 Series
300 Series Commercial
A-193, Grade 88* A-194, Grade 8 Commercial
A-351 , Grade CFSM A-351, Grade CF3M A-351 , Grade CFSM A-276, Type 316
Stainless Steel Stainless Steel Steel Aluminum Malleable Iron Steel
Stainless Steel Steel
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel PTFE Stainless Steel Stainless Steel PTFE** Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Yoke Bushing
Yoke Bushing Locknut Headless Set Screw Identification Plate Handwheel Handwheel Key
Yoke
lubricant Fitting Stem
Gland Eyebolt Nut Gland Eyebolt Gland Eyebolt Pin Gland Flange Packing
Yoke Stud
Yoke Stud Nut Gasket
Body (F.E.)
BOdy (T.E. & W.E) Wedge
Gland Follower
Fig. 1973 Flanged
Sizes, 1/2" through 24" Above 2" Data on Request
Fig. 1972 Threaded Sizes, 1/4" through 2"
* Class 2 (strain hardened) Bolting for 1/2" and smaller sizes .. Spiral wound with Type 316 Stainless Steel with PTFE filler
ORDERING
• Socket Welding End valves use Threaded End Figure number with suffix S.W.E.
• Butt welding End valves use Flanged End figure number with suffix B.W.E.
• When ordering Butt Welding End valves specify schedule of tubing or pipe end, and give complete data concerning style, figure number and contour of weld ends
SPECIFICATIONS
• Flanged valves have end flanges in accordance with ASME B16.5
• Face-to-face dimensions conform to ASME B16.10
FEATURES
• Fully guided Solid Wedge
• Integral Seats
• Other alloys are available on special order
• Valves can be furnished with Socket or Butt Welding Ends
DIMENSIONS (Inches)
S;~e 1{4 3J8 1/2 3/4 11/4 1112 2 21/2' through 24'
t.. (T.E .. s.w.E.) 21/8 21/8 3 3112 4 41/2 53/4 DATA
G (F.E .. B.W.e.) 61/2 7112 81/2 9 91/2 111/2 ON
G 65/8 65/8 715/16 87/8 93/4 111/16 127/16 141/4 REOUEST
H 3 3 3112 4 5 6 7 8
WEIGHTS (Pounds)
fig. 1972 3.6 4.3 5.1 7.1 10.6 16 21.3 32
Fig. 1973 8.3 15 20.9 26.5 38.1 42
Fig. 1972
Fig. 1973 86
THE WM. POWELL COMPANY - SINCE 1846
CORROSION RESISTANT GLOBE VALVE
CLASS 200 UNION BONNET THREADED ENDS
PRESSUREfTEMPERATURE RATINGS In accordance with ASME 616.34
MATERIALS
DESCRIPTION
ASTM Spec.
MATERIAL
Steel Aluminum Malleable Iron Stainless Steel Stainless Steel Stainless Steel PTFE Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Handwheel Nut Identification Plate HandwheeJ
Stem
Packing Gland Packing Nut Packing
Packing Collar Bonnet
Bonnet Ring
Disc locknut Horse Shoe Ringt Disc
Body
Commercial Commercial
A-47, Grade 32510 A-276, Type 316 A-276, Type 316 A-276, Type 316 Commercial
A-276, Type 316 A-351 , Grade CF8M A-351 , Grade CF8M A-276, Type 316 A-582, Type 303 A-276, Type 316 A-351 , Grade CF3M
t 1/4 to 1 incl.
FEATURES
• Plug type disc; however, valves can be furnished with special discs on special order
• Integral Seats
• Socket Welding end valves can be furnished on order
ORDERING
• Socket Welding End valves use Threaded End figure number with suffix S.W.E.
• When ordering Socket Welding End valves, specify schedule of tubing or pipe end, and give complete data concerning style, figure number and contour of weld ends
Fig. 1861 Threaded Sizes, 1/4" through 2"
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1114 1112 2
A 27/16 27/16 27/16 33/8 33/8 51/2 51/2 6
G 43/8 43/8 43/8 527132 527/32 812116 81/16 91/8
H 23/4 23/4 23/4 31/4 31/4 41/16 41/16 43/4
WEIGHTS (Pounds)
Fig. 1861 1.1 1.1 1.1 2.7 4.9 8.8 9.8 12.4
Fig. 1861 87
THE WM. POWEll COMPANY - SINCE 1846
CLASS 150-200
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM THREADED and FLANGED ENDS
CORROSION RESISTANT GLOBE VALVES
PRESSURE/TEMPERATURE RATINGS In accordance with ASME B16.34
MATERIALS DESCRIPTION
ASTM Spec
MATERIAL
Steel Aluminum Malleable Iron Stainless Steel Stainless Steel Steel
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel PTFE Stainless Steel Stainless Steel PTFE Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Commercial Commercial
A-47, Grade 32510 A-276, Type 316 A·582, Type 416 Commercial
A·351 , Grade CF8M 300 Series
300 Series
300 Series
300 Series
A·276, Type 316 Commercial
A·194, Grade 8 A-193, Grade 88 Commercial
A-276, Type 316 A-276, Type 316 A-351 , Grade CF8M A-351 , Grade CF3M
Handwhee! Nut Identification Plate Handwheel
Stem
Yoke Bushing Headless Set Screw Yoke
Gland Eyebolt Nut Gland Eyebolt Gland Eyebolt Pin Gland Flange Gland Follower Packing
Yoke Bolt Nut Yoke Bolt Gasket
Disc Locknut Disc
Body (F.E.)
Body (T.E., S.W.E., B.W.E.)
Fig. 2475 (Class 150) Flanged
Sizes, 1/2" through 2 1/2" Sizes, 3" through 24" See Page 89
Fig. 2474 (Class 200) Threaded Sizes, 1/4" through 3
ORDERING
• Socket Welding End valves use Threaded End figure number with suffix S.W.E.
• When ordering Socket Welding End valves, specify schedule of tubing or pipe end, and give complete data concerning style, figure number and contour of weld ends
SPECIFICATIONS
• Flanged valves have end flanges in accordance with ASME 816.5
• Face-to-face dimensions conform to ASME 816.10
FEATURES
• Plug type disc; however, special discs are available on order.
• Other alloys are available on special order
• Socket and Butt Welding End valves are available
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 i if4 1112 2 2112 3" 4 thru 24
A (T.E .. SW.E.) 27/8 27/8 27/8 3114 33/4 51/2 51/2 6 63/4 8
G {F.E.. B.W.E.} 41/4 4518 5 51{2 6112 8 8112 See
Page
G 63/4 63/4 63/4 75116 83116 87/8t 97/8 107/8 121/4 141/8 89
H 3 3 3 31/2 4 41121: 5 6 7 8
t 9 718 (TE, WE)
1:5 (TE. WE)
Fig. 2474 Fig. 2475 WEIGHTS (Pounds)
Fig. 2474 3.5 3.5 3.5 4.5 6.7 10.5 13.7 19.8 27.4 40.4
Fig. 2475 5 6.5 9.3 14.7 20 29.5 40
• for 3" 2475, see page 89 88
THE WM. POWELL COMPANY - SINCE 1$46
CORROSION RESISTANT GLOBE VALVES
I
B
~------A--------~
Fig. 2475 Sizes, 3" & 4 u
Fig. 2629 Sizes. 6" through 24"
Above 12" Data on Request
ORDERING
• Butt Welding End valves use Flanged End figure number with suffix B.WE
CLASS 150
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM FLANGED ENDS
PRESSUREITEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec
Body (F.E.) Body (W.E.) Bonnet
Disc
Stem
Handwheel Gland Flange Gland Follower Disc Locknut Yoke Bushing Bonnet Bolt Bonnet Nut Gland Eyebolt Gland Nut
Gland Eyebolt Pin Wheel Nut
Name Plate Packing
Gasket
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Ductile Iron Stainless Steel Stainless Steel Stainless Steel DuctJle Iron Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel PTFE
PTFE
A-351. Grade CF8M A-351 , Grade CF3M A·351 , Grade CF8M A·351 , Grade CF8M A-276, Type 316. or A-182, Grade F316 A-536, Grade 65-45-12 300 Series
A-182, Grade F316 A·351 , Grade CF8M A-439, Grade D2C A·193, Grade B8 A·194, Grade 8
300 Series
300 Series
300 Series
A-194, Grade 8 A-240, Grade 304 Commercial
Sheet
89
SPECIFICATIONS
• Flanged valves have end flanges in accordance with ASME 816.5
• Face-to-face dimensions conform to ASME 816.10
FEATURES
• Other alloys are available on special order
DIMENSIONS (Inches)
Size 1/4 to 2112 3 4 6 13 10 12 14 throUGh 24
A. Face to Face RF. • see 9112 11112 16 19112 24112 271J2 DATA ON
A. face 10 Face aWE, page 9112 111/2 16 19112 24112 27112 REQUEST
a. Valve Open. . . • 88 147/8 17314 201/4 223/4 293/8 323/4
C. Hand Wheel Dia . 10 12 14 16 22 22
Weight(LbS) F.E.. . 71 109 173 323 565 1105 THE WM. POWELL COMPANY - SINCE 184~
CLASS 300
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM THREADED and FLANGED ENDS
CORROSION RESISTANT GLOBE VALVES
PRESSUREITEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS DESCRIPTlON
ASTM Spec
MATERIAL
Commercial Commercial
A-47, Grade 32510 A~276, Type 316 A-5S2, Type 416 Commercial
A~351, Grade CFSM 300 Series
300 Series
300 Series
300 Series
A-276, Type 316 Commercial
A-194, Grade S A-193, Grade BS Commercial
A-276, Type 316 A-276, Type 316 A-351 , Grade CFSM A-351, Grade CF3M
Steel Aluminum Malleable Iron Stainless Steel Stainless Steel Steel
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel PTFE Stainless Steel Stainless Steel PTFE Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Handwheel Nut Identification Plate Handwheel
Stem
Yoke Bushing Headless Set Screw Yoke
Gland Eyebolt Nut Gland Eyebolt Gland Eyebolt Pin Gland Flange Gland Follower Packing
Yoke Bolt Nut Yoke Bolt Gasket
Disc Locknut Disc
Body (FE)
Body (T.E., S.W.E., B.W.E.)
Fig. 2447 Flanged
Sizes, 1/2" through 2 1/2" Sizes, 3" through 16" See Page 91
Fig. 2446 Threaded Sizes, 1/4" through 3"
ORDERING
• Socket Welding End valves use Threaded End figure number with suffix S.W.E.
• Butt Welding End valves use Flanged End figure number with suffix B.W.E.
• When ordering Butt Welding End valves, specify schedule of tubing or pipe end, give complete data concerning style, figure number and contour of weld ends
SPECIFICATIONS
• Flanged valves have end flanges in accordance with ASME 816.5
• Face-to-face dimensions conform to ASME B16.10
FEATURES
• Plug type disc; however, special discs are available on special order
• I ntegral Seats: renewable Seat Rings can be supplied on special order
• Other alloys are available on special order
• Socket and Butt Welding End valves are available
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 11/4 1 1/2 2 2112 3' 4 through 16
A (T.E., S.W.E.) 27/8 27/8 27/8 31/4 33/4 51/2 51/2 6 6314 8
C (F.E., B.W.E.) 6 7 8 81/2 9 10112 11 1/2 See
G 63/4 63/4 63/4 75/16 83/16 87/8t 97/8 107/8 121/4 141/8 Page
H 3 3 3 3112 4 4112t 5 6 7 8 91
t 9718 for (T.E .• S.W.E.) t 5 for (T.E., S.W.E.)
WEIGHTS (Pounds)
Fig. 2446 3.6 3.6 3.8 4.6 7.1 13.5 19.1 25.8 34.6 51
Fig. 2446 Fig. 2447 Fig. 2447 6.5 11.3 13.1 16.4 25.3 34.1 50
• for 3" 2447, see page 91 90
THE WM. POWELL COMPANY - SINCr: 1846
CLASS 300
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM THREADED and FLANGED ENDS
CORROSION RESISTANT GLOBE VALVES
~-------C-------4
PRESSUREITEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec
Body (FE) Body (W.E.) Bonnet
Disc
Stem
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
A-351, Grade CF8M A-351 , Grade CF3M A-351 , Grade CF8M A-351 , Grade CF8M A-276, Type 316, or A-182, Grade F316 A-536, Grade 65-45-12 300 Series
A-182, Grade F316 A-351 , Grade GF8M A-439, Grade 02C A-193, Grade 88 A-194, Grade 8
300 Series
300 Series
300 Series
A-194, Grade 8 A-240, Grade 304 Commercial
Sheet
I
B
Handwheel Gland Flange Gland Follower Disc Locknut Yoke Bushing Bonnet Bolt Bonnet Nut Gland Eyebolt Gland Nut
Gland Eyebolt Pin Wheel Nut
Name Plate Packing
Gasket
Ductile Iron Stainless Steel Stainless Steel Stainless Sleel Ductile I ron Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel PTFE
PTFE
....... ----A ------4
Fig. 2447 Sizes, 3" through 16"
SPECIFICATIONS
• Flanged valves have end flanges in accordance with ASME B16.5
• Face-to-face dimensions conform to ASME B 16.10
ORDERING
• Butt Welding End valves use Flanged End figure number with suffix B.W.E.
• When ordering Butt Welding End valves specify schedule of tubing or pipe end, give complete data conceming style, figure number and contour of weld ends
FEATURES
• Other alloys are available on special order
• Socket and Butt Welding End valves are available
DIMENSIONS (Inches)
Size 1/4 to 2 1/2 3 4 6 8 10 12 14 through 16
A. Face to Face R.F .• . see 121/2 14 171/2 22 241/2 28
A. Face to Face B.W .. • page 121/2 14 17112 22 241/2 28 DATA
ON
B. Valve Open . . . • . 90 153/8 183/8 221/8 275/8 325/8 367/8 REQUEST
C. Hand Wheel. • . . . 10 12 16 22 22 22
Weight(Lbs) F.E •. 100 148 300 510 830 1435 91
THE WM. POWELL COMPANY - SINCE 1846
CLASS 600
BOLTED FLANGED YOKE-BONNET OUTSIDE SCREW RISING STEM THREADED and FLANGED ENDS
CORROSION RESISTANT GLOBE VALVES
PRESSUREITEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec
Steel Aluminum Malleable Iron Stainless Steel Stainless Steel Steel
Steel
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel PTFE Stainless Steel Stainless Steel PTFE** Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Commercial Commercial
A-47, Grade 32510 A-276, Type 316 A-5S2, Type 416 Commercial Commercial
A-351 , Grade CFSM 300 Series
300 Series
300 Series
300 Series
A-276, Type 316 Commercial
A-194. Grade S A-193. Grade 88* Commercial
A-276. Type 316 A-276. Type 316 A-351 , Grade CFSM A-351 , Grade CF3M
Handwheel Nut Identification Plate Handwheel
Stem
Yoke Bushing Lubricant Fitting Headless Set Screw Yoke
Gland Eyebolt Nut Gland Eyebolt Gland Eyebolt Pin Gland Flange Gland Follower Packing
Yoke Stud Nut Yoke Stud Gasket
Disc Locknut Disc
Body (FE)
Body (T.E. & WE)
Fig. 1983 Flanged, Globe Valve Sizes. 1/2" through 12"
Fig. 1982 Threaded. Globe Valve Sizes, 1/4" through 2"
* Class 2 (Strain Hardened) Bolting for 3/4~ and smaHersizes
U Spiral wound Type 316 Stainless Steel with PTFE filler
ORDERING
• Socket Welding End valves use Threaded End figure number with suffix S.W.E.
• Butt Welding End valves use Flanged End figure number with suffix B.WE
• When ordering Butt Welding End valves, specify schedule of tubing or pipe end, give complete data concerning style, figure number and contour of weld ends
SPECIFICATIONS
• Flanged valves have end flanges in accordance with ASME B16.5
• Face-to-race dimensions conform to ASME 816.10
FEATURES
• Plug type disc; however, other discs are available on
special order
• Integral Seats
• Other alloys are available on special order
• Socket and Butt Welding End valves are available
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1 11/4 1112 2 3 4 through 12
A (T.E., S.w.E.) 27/8 27/8 27/8 31/4 33/4 5 55/8 61/4 - DATA
C (F.E., a.w.E.) 61/2 71/2 81/2 91/2 11 112 14 ON
G 63/4 63/4 63/4 75/16 85/16 101/16 107/8 123/4 177/16 REQUEST
H 3 3 3 31/2 5 6 7 8 10
WEIGHTS (Pounds)
Fi9·1982 Fig. 1982 3.7 3.7 3.8 4.8 7.4 17.5 21 40
Fig. 1983 Fig. 1983 8.1 12.8 16.5 35.8 58 80 92
THE WM. POWELL COMPANY - SfNCe: 1846
CORROSION RESISTANT NEEDLE GLOBE VALVES
SCREWED~IN BONNET THREADED ENDS
PRESSUREITEMPERATURE RATINGS 3000 psi Non-Shock Cold Water, Oil or Gas
Fig. 1976 Sizes, 1/4" through ,.
MATERIALS
DESCRIPTION MATERIAL
ASTM Spec
Handwheel Nut Bronze Commercial
Identification Plate Aluminum Commercial
Handwheel Malleable Iron A-47, Grade 32510
Stem Stainless Steel A-276, Type 316
Packing Gland Stainless Steel A-276, Type 316
Packing Nut Stainless Steel A-276, Type 316
Packing PTFE Commercial
Bonnet Stainless Steel A-276, Type 316
Body Stainless Steel A·276, Type 316*
* Alternate cast material A-351 , Grade CF8M
SWING CHECK VALVES 200 WOG SCREWED~IN CAP PRESSUREITEMPERATURE RATINGS 350°F Steam Pressure
Fig. 1847 Sizes, 1/4" through 3"
MATERIALS
DESCRIPTION
MATERIAL
ASTM Spec.
Cap Stainless Steel A-351. Grade CF8M
Carrier Plug Stainless Steel A-276, Type 316
Carrier Pin Stainless Steel A-276, Type 316
Disc Stainless Steel A-3S1 t Grade CF8M
Body {T.E., S.W.E.) Stainless Steel A-351 , Grade CF3M
Gaskets PTFE Commercial
DIMENSIONS (Inches) Fig. 1976
Size 1/4 3/8 112 3/4
A 17/8 21/2 21/2 3 3112
J Center To Bottom-Globe 7116 5/8 5/8 11/16 718
G Center To Top-Ope n 3 311/16 3 11116 4112 53/8
H Diameter of Wheel 21/8 21/2 21/2 3 3114
Diameter of Seat Opening 3116 1/4 1/4 3/8 1/2
Fig. 1976 WEIGHTS (Pounds)
Fig. 1976 1.1 1.5 2.4 3.9
DIMENSIONS (Inches) Fig. 1847
Size 1/4 3/8 1/2 3/4 1 11/4 1112 2 2112 3
A 29/16 29/16 29/16 31/8 31/2 41/8 43/4 51/2 73/32 77/8
Fig. 1847 G 15/8 15/8 15/8 2 23/8 25/8 3 31/8 311/16 43/32
WEIGHTS (Pounds)
Fig. 1847 .9 .9 .9 1.5 1.9 2.6 3.4 4.9 7.3 11.5 THe WM. POWEll. COMPANY - SINCE 184ll
93
MATERIALS
DESCRIPTION MATERIAL ASTM Spec.
Cap Bolt Stainless Steel A-193, Grade B8
Cap Bolt Nut Stainless Steel A-194, Grade 8
Cap Stainless Steel A-351 , Grade CF8M
Fig. 2341 Gasket PTFE Commercial
Threaded Carrier Pin Stainless Steel A-276, Type 316
Sizes, 1/4" through 2" Carrier Stainless Steel A·351 , Grade CF8M
(Class 200) Disc Locknut Stainless Steel A·276, Type 316
Disc (1/4"-3/4") Stainless Steel A·276, Type 316
Disc (1"-8") Stainless Steel A·351 , GradeCF8M
Body (F.E.) Stainless Steel A·351 , Grade CF8M
Body (T.E.. & W.E.) Stainless Steel A·351 , Grade CF3M
Locating Pin Stainless Steel Commercial CORROSION RESISTANT SWING CHECK VALVES
Fig. 2342 Flanged
Sizes, 1/2" through 8" (Class 150)
Sizes 10" and up, see page 95
ORDERING
• When ordering Butt Welding End valves specify schedule of tubing or pipe end, and give complete data concerning style, figure number and contour of weld ends
CLASS 150-200
BOLTED FLANGED CAP THREADED and FLANGED ENDS
PRESSUREITEMPERATURE RATINGS In accordance with ASME 816.34
SPECIFICATIONS
• Flanged valves have end flanges in accordance with ASME B16.5
• Face-to-face dimensions conform to ASME B 16.10
FEATURES
• Disc suspended from valve cap and without side plugs
• Integral Seats, however, Renewable Screwed-In Seat Rings are available on order
• Cap has a male and female [oint
• Valves can be used in horizontal or vertical position; however, when installed in vertical line, flow must be upward with pressure under the disc
• Other alloys are available on special order
THE WM. POWELL COMPANY - SINce 1646
94
r MATERIALS
I DESCRIPTION MATERIAL ASTM Spec.
B Body (F.E.) Stainless Steel A-351, Grade CF8M
Body (W.E.) Stainless Steel A-351 , Grade CF3M
Cover Stainless Steel A·351, Grade CF8M
Disc Stainless Steel A·351 , Grade CF8M
Hinge Stainless Steel A-351 , Grade CF8M
Hinge Pin Stainless Steel A-182, Grade F316
Plug Stainless Steel A-193, Grade B8
Cover Bolt Stainless Steel A-193, Grade B8
Cover Nut Stainless Steel A-194, Grade 8
Disc Nut Stainless Steel A-194, Grade 8
Washer Stainless Steel A-276, Grade 316
Eye Bolt Stainless Steel A-193, Grade B8
Name Plate Stainless Steel A-240, Grade 304
Gasket PTFE Sheet CORROSION RESISTANT SWING CHECK VALVES
Fig. 2633 Sizes, 10" through 30" Sizes, 1/2" through 8", See Page 94
ORDERING
• When ordering 8utt Welding End valves specify schedule of tubing or pipe end, and give complete data concerning style, figure number and contour of weld ends
CLASS 150
BOLTED FLANGED CAP FLANGED ENDS
PRESSUREITEMPERATURE RATINGS tn accordance with ASME B16.34
SPECIFICATIONS
• Flanged valves have end flanges in accordance with ASME 816.5
• Face-to-face dimensions conform to ASME B 16.10
FEATURES
• Valves can be used in horizontal or vertical position; however, when installed in vertical line, flow must be upward with pressure under the disc
• Other alloys are available on special order
DIMENSIONS (Inches)
Size (1111I1ches) 10 12 14 16 18 20 24 30
A. Face 10 Face R.F. 24112 27112 31 34 381/2 381/2 51 60
A. face to face B.W. 24112 27112 31 34 381/2 38112 51 60
B. Valve Height 13114 155/8 17112 201/2 22 231/4 275/8 34114
Weight(LbS) 365 505 655 1250 1550 1950 3440 4965 THE WM. POWELL COMPANY - SINCE 1846
95
CORROSION RESISTANT SWING CHECK VALVES
Fig. 2346 Flanged
Sizes, 1J2" through 24" Above 8" Data on Request
Fig. 2345 Threaded Sizes, 1/4" through 2"
CLASS 300
BOLTED FLANGED CAP THREADED and FLANGED ENDS
PRESSUREITEMPERATURE RATINGS In accordance with ASME 616.34
MATERIALS
DESCRIPTION MATERIAL
ASTMSpec.
Cap Bolt Stainless Steel
Cap Bolt Nut Stainless Steel
Cap Stainless Steel
Gasket PIFE
Carrier Pin Stainless Steel
Disc Locknut Stainless Steel
Oisc (1/4'-3/4') Stainless Steel
Disc (1' & up) Stainless Steel
Body (F.E.) Stainless Steel
Body (T.£., S.w.£., RW.E.J Stainress Steer Locating Pin (1/4' -S') Stainless Steel
A-193-B8
A-194, Grade 8 A-351 , Grade CF8M Commercial
A-276, Type 316 A-276, Type 316 A-276, Type 316 A-351 , Grade CFSM A-351 , Grade CF8M A-351 , Grade CF3M Commercial
SPECIFICATIONS
-Flanged valves have end flanges in accordance with ASME B16.5
-Face-to-face dimensions conform to ASME B16.10
ORDERING
·When ordering Butt Welding End valves specify schedule of tubing or pipe end, and give complete data concerning style, figure number and contour of weld ends
FEATURES
-Disc suspended from valve cap and without side plugs
-Integral Seats, however, Renewable Screwed-In Seat
Rings are available on order -Cap has a male and female joint
·Valves can be used in horizontal or vertical position; however, when installed in vertical line. flow must be upward with pressure under the disc
-Other alloys are available on special order
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1 11/2 2 3 4 6 8 10 thru 24
A (T.E .. S.W.E.) 23/4 23/4 23J4 33/4 4 51/2 6 Data
C (FE. SW.E.) - 6 7 81/2 91/2 101/2 121/2 14 171/2 21 On
G (H.) 25/32 25/32 25/32 3 33/8 41/16 49/16 - Request
G (F.E.) 27/16 35/16 311/16 41/16 49{16 59116 61/8 81/8 101/4
WEIGHTS (Pounds)
Flg.2345 2.2 2.2 4,4 6.1
Fig. 2346 10.6 18 30 33.3 68 112 225 360
Fig. 2345
Fig. 2346 THE WM. POWEll COMPANY - SINCE 1846
96
CORROSION RESISTANT SWING CHECK VALVES
Fig. 2350 Flanged
Sizes, 1/2~ through 18~ Above 3n Data on Request
Fig. 2349 Threaded Sizes, 1W through 2
CLASS 600
BOLTED FLANGED CAP THREADED and FLANGED ENDS
PRES$UREfTEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION MATERIAL
ASTM Spec.
Cap Stud Stainless Steel
Cap Stud Nul Stainless Steel
Cap Stainless Steel
Gasket PTFE
Carrier Pin Stainless Steel
Carrier Stainless Steel
Disc Locknut Stainless Steel
Disc (1/4" -3/4') Stainless Steel
Disc (1' & up) Stainless Steel
Body (F,€,) Stainless Steel
Body (H., S.W.E., S.W.E.) Stainless Steel Locating Pin (1/4' -S') Stain less Steel
A-193-BSA-194, Grade 8 A-351 , Gr. CFSM
A-276, Type 316 A-351 , Gr. CF8M A-276, Type 316 A-276, Type 316 A-351 , Gr. CF8M A-351 , Gr. CFSM A-351 , Gr. CF3M Commercial
• Class 2 (Strain hardened) Bolling for 3/4" and smaller sizes •• Spiral wound Type 316 Stainless Steel with PTFE filler
ORDERING
·When ordering Butt Welding End valves specify schedule 01 tubing or pipe end, and give complete data concerning style, figure number and contour of weld ends
SPECIFICATIONS
-Flanged valves have end flanges in accordance with ASME 816.5
-Pace-to-face dimensions conform to ASME B16.10
FEATURES
-Disc suspended from valve cap and without side plugs
·Integral Seats, however, Renewable Screwed-In Seat Rings are available on order
·Cap has a male and female joint
·Valves can be used in horizontal or vertical position; however, when installed in vertical line, flow must be upward with pressure under the disc
·Other alloys are available on special order
DIMENSIONS (Inches)
Size 114 318 1/2 3/4 1 11/2 2 3 4 Thru 18
A (T.E., S.W£) 23/4 23/4 23/4 3314 4 55/8 61/4 Data
C (H., B.W.E.) • 61/2 71/2 81/2 91/2 11112 14 On
G (T.E.) 29132 29/32 29/32 31/8 317/32 41/4 57116 Request
G (F.E.) 21/2 313/32 327{32 41/4 57/16 6 13/16
WEIGHTS (Pounds)
Fig. 2349 Fig. 2349 4.3 8.5 11 14.6
Fig. 2350 Fig. 2350 lOA 23.8 52.4 83.7 THE WM. POWELL COMPANY - SlNCE 18<1Q
97
CORROSION RESISTANT HORIZONTAL LIFT CHECK VALVES
Fig. 2003 Flanged
Sizes, 1/2" through 3" (Class 150)
Fig. 2002 Threaded Sized, 1W through 3" (Class 200)
ORDERING
-When ordering 8utt Welding End valves specify schedule of tubing or pipe end, and give complete data concerning style, figure number and contour of weld ends
CLASS 150-200 BOLTED CAP
THREADED and FLANGED ENDS
PRESSURErrEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION MATERIAL
ASTM Spec.
Cap Bolt Stainless Steel
Cap Bolt Nut Stainless Steel
Cap Stainless Steel
Gasket PTFE
Body (FE) Stainless Steel
Body (IE., S.w.E., e.wE) Stainless Steel Disc Stainless Steel
A-193, Grade B8 A-194, Grade 8 A-351 , Gr. CF8M Commercial A-351, Gr. CF8M A-351, Gr. CF3M A-276, Type 316
SPECIFICATIONS
-Flanged valves have end flanges in accordance with ASME 816.5
-Face-to-face dimensions conform to ASME 816.10
FEATURES -Renewable Disc
-Integral Seat
-Salted Caps with male and female joint
-Other alloys are available on special order
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3
A (H., S.W.E.) 2 7/B 27/B 27/8 31/4 33/4 51/2 51/2 6 63/4 8
C (F.E., B.W.E.) " 41/4 45/8 5 51/2 61/2 8 81!2 91/2
G 23(16 23M 23/16 25M 25/B 31/32t 39/32 323/32 45/32 5SM
t 3 9/32 lor (lE., S.W.E.)
Fig. 2002 WEIGHTS (Pounds)
Fig. 2002 1.5 2 2.2 2.9 4.6 7.7 11 15.3 17.7 29.9
Fig. 2003 4.7 5.9 7.6 16.1 18.8 23.2 31 42.9 Fig. 2003
THE WM. POWELL COMPANY - SINCE 1846
98
CORROSION RESISTANT HORIZONTAL LIFT CHECK VALVES
Fig. 2004 Threaded Sizes, 1/4· through 3"
Fig. 2005 Flanged
Sizes, 1/2" through 3"
ORDERING
·When ordering Butt Welding End valves specify schedule of tubing or pipe end, and give complete data concerning style, figure number and contour of weld ends
CLASS 300 BOLTED CAP
THREADED and FLANGED ENDS
PRESSUREITEMPERATURE RATINGS In accordance with ASME 816.34
MATERIALS
DESCRIPTION MATERIAL
ASTM Spec.
Cap Bol! Stainless Steel
Cap Bolt Nut Stainless Steel
Cap Stainless Steel
Gasket PTFE
Body (F.E.) Slain less Sleel
Body (T.E., SW.E., BW.E.) Stainless Steel Disc Stainless Steel
A-193, Grade BS A-194, Grade 8 A-351, Gr. CF8M Commercial A-351 , Gr. CFSM A-351, Gr. CF3M A-276, Type 316
SPECIFICATIONS
=Flanqed valves have end flanges in accordance with ASME B16.5
-Face-to-face dimensions conform to ASME B16.10
FEATURES -Renewable Disc
-Integral Seat
-Bolted Caps with male and female joint
-Other alloys are available on special order
Fig. 2005
THE WM. POWELL COMPANY - SINCE 1846
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2 21/2 3
A (T.E .. S.W.E.) 27/8 27/8 27/8 31/4 33/4 51/2 51/2 6 63/4 8
C (F.E., B.w.E.) - 6 7 8 81/2 9 101/2 111/2 121/2
G 23/16 23/16 23/16 25/16 25/8 31/32t 39132 323132 47/32 53{16
t 3 9{32 for (T.E.. SWE.)
WEIGHTS (Pounds)
Fig. 2004 1.4 2 2.7 3.4 5.3 7.1 11 15.3 17.7 29.9
Fig. 2005 4.7 6.1 8.5 16.1 23.8 26.8 31 42.9 99
CORROSION RESISTANT HORIZONTAL LIFT CHECK VALVES
Fig. 2007 Flanged
Sizes, 1/2" through 2"
Fig. 2006-Threaded Sizes, 1/4" through 2"
ORDERING
-Socket Welding End valves use Threaded End figure number with suffix S.W.E.
-Butt Welding End valves use Flanged End figure number with suffix B.W.E.
·When ordering Butt Welding End valves specify schedule of tubing or pipe end, and give complete data concerning style, figure number and contour of weld ends
CLASS 600 BOLTED CAP
THREADED and FLANGED ENDS
PRESSUREITEMPERATURE RATINGS In accordance with ASME B16.34
MATERIALS
DESCRIPTION MATERIAL
ASTM Spec.
Cap Stud Stainless Steel
Cap Stud Nut Stainless Steel
Cap Stainless Steel
Gasket PTFE**
Body (FE) Stainless Steel
Body (T.E., S.W.E., BW.E.) Stainless Steel Disc Stainless Steel
• Class 2 (Strain Hardened) Bolting
• 'Spiral wound Type 316 Stainless Steel with PTFE filler
A-193, Grade B8' A-194, Grade 8 A-351 , Gr. CF8M Commercial A-351 , Gr. CF8M A-351 , Gr. CF3M A-276, Type 316
SPECIFICATIONS
·Flanged valves have end flanges in accordance with ASME 816.5
=Face-to-face dimensions conform to ASME B16.10
FEATURES
·Disc, accurately guided on top and bottom, is
quickly renewable without removing valve from line -Integral Seats
-Bolted Caps with male and female joint
-Socket and Butt Welding End valves are available
-Other a1r0Ys are avaftaole on speciar order
DIMENSIONS (Inches)
Size 1/4 3/8 1/2 3/4 1 11/4 11/2 2
A (U., S.w.f.} 2 7(8 27(8 27(8 31{4 33/4 5 6 7
C (rE., B.W.E.) - 61/2 71/2 81{2 91{2 111/2
G 23/8 23/8 23/8 219/32 231/32 315/16 43/16 59/16
Fig. 2006 WEIGHTS: On Application THE WM. POWEll COMPANY - SINCE 1846
100