ASME / ANSI B16.9 90¡ã, 45¡ã All Fittings Elbows and Reducers Caps 180¡ã Returns Angularity Tolerance Tees Outside Inside Center to Back to Nominal Wall Center to End Overall Overall Alignment Nominal off off Diameter Diameter Center face Pipe Size Thickness Dimension Length Length of Ends Pipe Size Angle Plane at Bevel at End Dimension Dimension (in) D ¡¡ t A.B.C.M H E O K U (in) Q P 1 1 +1.52- 1 /2to 2 /2 0.76 1.52 1.52 3.05 6.35 6.35 0.76 /2 to 4 0.76 1.51 0.76 3 to 31/2 1.52 1.52 1.52 1.52 3.05 6.35 6.35 0.75 5 to 8 1.52 3.05 4 1.52 1.52 1.52 1.52 3.05 6.35 6.36 0.76 10 to 12 2.29 4.83 +2.29- 5 to 8 1.52 Not Less 1.52 1.52 6.35 6.35 6.35 0.76 14 to 16 2.29 6.35 1.52 Than +4.06- 10 to 18 3.05 87.5% of 2.29 2.29 6.35 9.65 6.35 1.52 18 to 24 3.05 9.65 3.05 Nominal +6.35- 20 to 24 4.83 Thickness 2.29 2.29 6.35 9.65 6.35 1.52 26 to 30 4.83 9.65 4.83 +6.35- 26 to 30 4.83 3.05 4.83 9.65 - - - 32 to 36 4.83 12.7 4.83 +6.35- 32 to 36 4.83 4.83 4.83 9.65 - - - ¡¡ 4.83