Professional Documents
Culture Documents
Network
Step 1: Connect your wireless router to your cable or DSL modem. Plug
the Ethernet cable directly into the back of your router in the port
labelled either WAN, WLAN, or Internet.
Step 2: Turn on your router. Wait until the WAN or WLAN light on your
router starts to flash and light up. Be patient as this can take up to a
minute.
Step 3: Plug the cable that came with your router into the network or
Ethernet jack on your computer. Plug the other end of the cable into any
one of the open ports on the back of the router.
Step 4: Open the web browser on your computer. In the top URL field,
enter your router's IP address. This should be supplied in your router's
user manual. If you cannot find it, "192.168.1.1" is the default address
for most routers. You should immediately be prompted for a username
and password. Your router manual should also contain this information.
If not, go to Routerpasswords.com and select the brand and model of
your router to find its default login information.
Step 5: Configure your router. There are three things you should
configure. The first is the SSID, which is the name that identifies your
wireless network. Choose a name for your network that will be uniquely
different from your neighbours. Second, set either a WEP or WPA
password to protect your network. This password will be needed to log
on to your Wi-Fi network. Third, be sure to create an administrative
password that you can use anytime you need to change your router's
settings in the future. Click "OK" or "Apply" to save your new
configurations.