Professional Documents
Culture Documents
Datasheet Amplificador741
Datasheet Amplificador741
November 1994
Schematic Diagram
TL/H/9341 – 1
TL/H/9341 – 7
2
Electrical Characteristics (Note 3) (Continued)
LM741A/LM741E LM741 LM741C
Parameter Conditions Units
Min Typ Max Min Typ Max Min Typ Max
Output Voltage Swing VS e g 20V
RL t 10 kX g 16 V
RL t 2 kX g 15 V
VS e g 15V
RL t 10 kX g 12 g 14 g 12 g 14 V
RL t 2 kX g 10 g 13 g 10 g 13 V
Output Short Circuit TA e 25§ C 10 25 35 25 25 mA
Current TAMIN s TA s TAMAX 10 40 mA
Common-Mode TAMIN s TA s TAMAX
Rejection Ratio RS s 10 kX, VCM e g 12V 70 90 70 90 dB
RS s 50X, VCM e g 12V 80 95 dB
Supply Voltage Rejection TAMIN s TA s TAMAX,
Ratio VS e g 20V to VS e g 5V
RS s 50X 86 96 dB
RS s 10 kX 77 96 77 96 dB
Transient Response TA e 25§ C, Unity Gain
Rise Time 0.25 0.8 0.3 0.3 ms
Overshoot 6.0 20 5 5 %
Bandwidth (Note 4) TA e 25§ C 0.437 1.5 MHz
Slew Rate TA e 25§ C, Unity Gain 0.3 0.7 0.5 0.5 V/ms
Supply Current TA e 25§ C 1.7 2.8 1.7 2.8 mA
Power Consumption TA e 25§ C
VS e g 20V 80 150 mW
VS e g 15V 50 85 50 85 mW
LM741A VS e g 20V
TA e TAMIN 165 mW
TA e TAMAX 135 mW
LM741E VS e g 20V
TA e TAMIN 150 mW
TA e TAMAX 150 mW
LM741 VS e g 15V
TA e TAMIN 60 100 mW
TA e TAMAX 45 75 mW
Note 1: For operation at elevated temperatures, these devices must be derated based on thermal resistance, and Tj max. (listed under ‘‘Absolute Maximum
Ratings’’). Tj e TA a (ijA PD).
Thermal Resistance Cerdip (J) DIP (N) HO8 (H) SO-8 (M)
ijA (Junction to Ambient) 100§ C/W 100§ C/W 170§ C/W 195§ C/W
Note 2: For supply voltages less than g 15V, the absolute maximum input voltage is equal to the supply voltage.
Note 3: Unless otherwise specified, these specifications apply for VS e g 15V, b 55§ C s TA s a 125§ C (LM741/LM741A). For the LM741C/LM741E, these
specifications are limited to 0§ C s TA s a 70§ C.
Note 4: Calculated value from: BW (MHz) e 0.35/Rise Time(ms).
Note 5: For military specifications see RETS741X for LM741 and RETS741AX for LM741A.
Note 6: Human body model, 1.5 kX in series with 100 pF.
3
Connection Diagrams
TL/H/9341–2
TL/H/9341 – 5
Ceramic Flatpak
TL/H/9341 – 6
4
Physical Dimensions inches (millimeters)
5
Physical Dimensions inches (millimeters) (Continued)
6
Physical Dimensions inches (millimeters) (Continued)
7
LM741 Operational Amplifier
Physical Dimensions inches (millimeters) (Continued)
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.