WELDER TRAINING AND TESTING INSTITUTE
=W-I-T-I
WWW. WELDERINSTITUTE.COM ‘1144 N. GRAHAM ST. - ALLENTOWN, PA 18109 - TEL 610.820.0551 - FAX 610.820.0271
Welding Procedure Specification (WPS)
Company Name: Sore
Supporting POR No. (s: Pre-Qualified Date: 7/1822007
WPS No. () RUT-AS Ren Nod Date:
Welding Processes): GTAW Type: Manual Transfer Mode: w/a Current: DCEN
Joint Detail Position
Type of Joint: Fillet Weld in T & Lap Joint (Sheet to Sheet & Position: All Positions
Supporting Member)
Weld Progression: Uphill Only
(es oF No): wa
= Percent Flow Rate
Backing: Wa Shielding —— Gaxex) esCompasiion (CFM
Groove Welded frome + n/a Argon 100% 10-25
Base Metals Coating(s)
‘Material Specification Type & Grade: pee News ae
Sheet Steel: All Prequalified Material %* All Prequalified Material
nD : Preheat
Suppring Se: A AWSDI.1 Stuur Sel Coderewalites | Pte atin: 50°F Mane —_650
Thickexs Ringer Scping St 3 SF, 1 12 V2 DST, Over? 1207FY
Sheet: Proqualitied-(7 gage t0 18 gage)
Supporting Steet: Prequalified (3/16" Max.)
Base Metal Preperation: na i
Filler Metals
[AWS Class: ER 705-6, SFA Specification: A 5.18
Travel Speed (Are
Passes__| Electrode Size Amps Volts Spot Weld-Time) | _ melting rate_| Wire feed Speed
a TS 3-77 13-10 a we
77:93 Bos
Mie 90-110 BI 4-6
108 - 132 14-16 8
The procedure may vary due to fabrication Sequence, fit up, pass size, etc. within the limitations of variables given in ANSUAWS.
DI3( 1998 )- Structural Welding Code-Sheet Steel.
Authorized By: ilWELDER TRAINING AND TESTING INSTITUTE
‘1144 N.GRAHAM ST. ~ ALLENTOWN, PA 18109
TEL 610-820-9551 - FAX 610-820:0271
Welding Procedure Specification (WPS)
AWS D1.3
Company Name: Sarmple
Supporting POR No. (9): Pre-Qualified
je Hevea Ce See
Date: 7/19/2007
WPS No. (9): RTF-19 RevNos0 Date
Welding Process (es) GTAW Manual Transfer Mode: nia (Current: DCEN
Joint Detail Position
Type of Joint: Square Groove (Sheet to Sheet) Position: All Positions
Weld Progression: Uphill Only
Backing (Yes or No): No
a Percent Flaw Fae
Backing: Without Shielding Gases) ef Composiion (CFI)
Groove Welded from- : One Side Only Argon 100% 10-25
Base Metals Coating(s)
‘Material Specification Type & Gra era Thickness 8
Sheet Steel: All Prequalified Material %* All Prequalified Material
i ai 5 Preheat
Supporting tec: AWS DL. Src Sel Code Prequalified | Pepe temp. (Min): 50 °F Mace 680 °F
Thickess Range:
‘Sheer: Proqualitied-(7 gage to 18 gage)
‘Supporting Steel: Prqualifed -(3/16" Max.)
Base Metal Preperation: nla
Sappenng Steck 3471 12° (180), 1122 12° 25°F), Over? 12.000)
Filler Metals
[AWS Class: ER 708-6
SFA Specification: A 5.18,
Travel Speed (Are
Spot Weld-Time)
The procedure may vary due to fabrication Sequence, fit up, pass size, ee. within the limitations of variables given in ANSVAWS
DIL3( 1998 )- Structural Welding Code-Sheet Steel.
Authorized By:WAI
\WWW.WELDERINSTITUTE.COM
WELDER TRAINING AND TESTING INSTITUTE
‘14d N.GRAMAM ST. - ALLENTOWN, PA 18109 «
TEL 610-820-9551 + FAX 610.820.0271
Welding Procedure Specification (WPS)
Company Name: Sample
Supporting POR No. (9): Pre-Qulified Date: 71972007
WPS No. (): RTF-20 Ren Nor Date:
Welding Process (es): GTAW Type: Mans Transfer Mode: n/a Current: DEEN
Joint Detail Position
Type of Join: Fare-Bevel Groove (Sheet to Sheet & Supporting Position: All Positions
Member), Flae-V Groove (Sheet to Sheet) enn
Backing (Yes oF No): Yes
re Percent Flow Bate
‘Backing: Prequalified Material Shielding Gas efCompestion —"(CPH)
Groove Welded from- : One Side Only Argon 100% 10.25
Base Metals Coating(s)
Material Specification Type & Grade etd) Tiicknesss 8
Sheet Steel: All Prequalified Material 10: All Prequalified Mate
; Preheat
Supporting Ste: A AWSDI.t Stitura Stee! Code-Proqaliied || Sr ermp, (atin: 50°F (Mays 650 °F
Steels
Thickess Range:
Sheet: Prequalified -(7 gage to 18 gage)
‘Supporting Steel: Prequalified -(3/16" Max.)
‘Base Metal Preperation: nla
Stoporing Set: 3471 12" USIP, 1122 V2" 257, Over? OOP
Filler Metals A
AWS Class: ER 708-6 SFA Specifiation: A S.18, &
Travel Speed (Are
Passes__|Klectrode Size a Volts Spot Wetd-Time) | _ melting rate__| Wire feed Speed
an oS a 1-19 ala wa
77-93 13-15
v6" 90-110 13-15
tos - 132 14-16
The procedure may vary due to fabri
D1.3( 1998 )- Structural Welding Code-Sheet Steel.
Authorized By
ion Sequence, fit up, pass size, etc. within the limitations of variables given in ANSUAWS