Professional Documents
Culture Documents
Power Amplifiers
Power Amplifiers
Power Amplifiers
2
3
Ultra-High Power Subwoofer Amplifiers
Frequency response,THD+N
ECLIPSE DA7232 ICEpower, 1000W Analog Amplifier W/Supply
Frequency response in 4Ω, 8Ω, and 16Ω and open load. THD+N-Vs-Output power at 100Hz/1kHz/5kHz
+30 1
+27.5 +150 0.5
+25
+22.5 +100 0.2
+20 +50 0.1
d
B +17.5 0.05
g d
+15 +0 e %
g 0.02
A +12.5
+10 -50
0.01
+7.5 -100 0.005
+5
+2.5 -150 0.002
+0 0.001
10 20 50 100 200 500 1k 2k 5k 10k 20k 100m 200m 500m 1 2 5 10 20 50 100 200 500 1k
Hz W
5kHz 100Hz & 1kHz
4000W DA7232
2 Channel Class D Subwoofer Amplifier
Heavy-duty metal
speaker terminal
block easily accepts Independent toroidal
heavy gauge cables. transformers for each
channel deliver generous
clean power to the
amplification section.
Variable crossover Heavy-duty metal speaker
setting controls terminal block easily
for matching accepts heavy gauge
subwoofers. cables.
High-efficiency, high-
energy MOSFET power
supply.
Advanced input stage optimized Radio frequency Twin ICEpower amplification
for use with subwoofer noise filter. modules form the heart of this
ICEpower modules. designed-for-competition
subwooofer amplifier.
4
ECLIPSE’s dedicated subwoofer amplifiers Quality construction throughout. Features
use Class D amplifier technology and Built to the same exacting standards as other • Maximum power output of 2000W (both
topology to produce the greatest models in the Premium Amplifer Series, the channels) into a 2 ohm load.
efficiency of any class of amplifier DA7232 and DA7122 boast high-end amplifier • Peak output current in excess of 50A for
operation. The DA7232 2 channel and circuits and construction techniques such as virtually limitless power.
DA7122 1 channel Class D subwoofer high-efficiency high-energy isolated power • Immense 120dBA dynamic range for
amplifiers effortlessly drive any subwoofer supplies, symmetrical layout, high input effortless reproduction of the lowest
system to produce awesome low overload, discrete protection and audiophile- frequencies.
frequencies both heard and felt. ECLIPSE grade components. This uncommon level of • Built-in protection against over and under-
combined well-known specialist audio attention to build and quality in dedicated voltage conditions.
manufacturer Bang&Olufsen’s subwoofer amplifiers is what optimizes these • Additional protection for amplifier and
amplification modules with proprietary amplifiers for use in the most demanding speakers as well as soft clipping and soft
no-compromise audio technologies to systems. start-up functions.
create the ultimate subwoofer amplifiers. • Balanced inputs and outputs.
34230
2 Channel Power Amplifier with ChannelFlex Crossover plus Subsonic Filter
6
Power, control and intensity. Preamp outputs. High-current, high-speed output
The ECLIPSE Premium Amplifiers feature no The 34230 also features crossover preamp level devices.
current limiting and completely unregulated power outputs, for adding additional amplifiers. Signal The output devices are capable of generating high
supplies for a neutral, clean sound quality with purity is maintained throughout due to common current at high speed to improve both frequency
virtually unlimited dynamic power on demand. signal reference grounds and high signal voltages. response and amplifier damping.
It perfectly complements the simplicity of total
Separate power supply and signal system design using ECLIPSE amplifiers. High-efficiency, high-energy MOSFET
amplifier sections. power supply.
The ECLIPSE 34230 has separate and independent Intelligent 7-way discrete protection The ECLIPSE power supply uses current draw
amplifier power supply and signal sections. The circuitry. from the car’s electrical system more efficiently
benefit of having separate power and driver stages Seven-way protection circuitry protects the to produce higher power.
are greater in a car audio environment, with its amplifiers from accidental misconnections or short
significant electrical current, vibrations and circuits in the audio system. There is thermal Double-sided printed circuit boards.
various sources of distortion. The ECLIPSE 34230 protection (up to 90°C), DC offset, protection ECLIPSE Premium Amplifiers employ 70-micron
has no noise interference between the power and against excessive current on the output side, copper circuit board traces (twice the thickness of
driver stages such as switching distortion and voltage output overload, excessive current in the a conventional copper trace) for superior sound
radiated noise for sonic purity and effortless power supply, reverse polarity power input and quality. This technology provides lower distortion
power. shorted speaker leads. A servo system monitors and improved low frequency performance.
each of these circuits and measures them against a
Symmetrical layout. reference. If a condition is determined to be Audiophile-grade component selection.
The ECLIPSE 34230 utilizes a symmetrical outside of reference tolerances, the amplifier enters High-quality components and parts designed
component layout to achieve superior channel a protection mode, preventing damage to the amp exclusively for quality audio applications are
separation. The right and left channels are and audio system. The protection circuitry is employed for a difference that is easily heard.
physically isolated to eliminate intermodulation never in the audio signal path, keeping the audio
and achieve excellent separation, resulting in signal free of interference, coloration or noise.
vastly improved system imaging capability.
Noise reduction with low distortion and
Massive bus bars. ultralow negative feedback.
The massive bus bars allow high current to flow to ECLIPSE amplifiers use very high-quality amp
the PC board more efficiently and keeps unwanted devices and the circuit makes minimal use of
heat and resistance to a minimum. negative feedback for better sound. The higher-
quality components in ECLIPSE amplifiers and
High voltage input. their advanced circuits make “bandaid” fixes like
ECLIPSE engineered very high input voltage too much NFB unnecessary.
capabilities into its amplifiers to take advantage of
the high signal voltage output from the head unit.
Able to handle input signals of up to 8 volts, these
amplifiers easily cope with competition-use
demands.
ChannelFlex Crossover.
There are effectively two separate and distinct
crossovers with a variable subsonic filter in the
34230 and switchable slope control for the
PA4212. The selectable slope allows for more
precise control of bandwidth limited output power,
which means more sonic accuracy in subwoofers,
midbass drivers, and midrange drivers without
distortion. The variable subsonic filter in the
34230 and switchable slope control for the
PA4212 will make speakers last longer and sound
audibly better.
7
34230 960W PA5532
2 Channel Power Amplifier 5/3 Channel Power Amplifier
with ChannelFlex Crossover plus Subsonic Filter with ChannelFlex Crossover plus Subsonic Filter
Specifications
34230 PA5532
13.8V POWER SUPPLY
Max. Power Output 550W × 2ch (4Ω) 125W × 4ch (2Ω), 460W × 1ch (SW, 2Ω)
2Ω — 70W × 4ch, 280W × 1ch
Power Output 4Ω 370W × 2ch 50W × 4ch, 200W × 1ch
4Ω bridged — 140W × 2ch
THD @ Rated Power @ 2Ω stereo 0.008% 0.008%
@ 4Ω stereo 0.004% 0.004%
@ 4Ω bridged 0.008% 0.008%
Signal to Noise 105dB 105dB
Freq. Response +0, –0.7 +0, –0.7
Crosstalk –75dB –75dB
Slew Rate 10Vµs 10Vµs
Damping Factor @ 60Hz >200 >200
Input Sensitivity 0.2 ~ 8V 0.2 ~ 8V
Max. Current Consumption (4Ω) 100 amps 70 amps
CHANNELFLEX CROSSOVER
Amp Crossover High Pass 12dB/octave — 50 ~ 200Hz (Front)
120Hz (Rear)
Low Pass 12dB/octave 50 ~ 200Hz 50 ~ 200Hz
Pre-Out Crossover High Pass 12dB/octave 50 ~ 200Hz —
Low Pass 12dB/octave — —
Subsonic Filter Freq. Range 0-60Hz 20Hz (Fix)
18dB/octave 12dB/octave
Slope (Fix) (Fix)
Dimensions (W × H × D) 18.80˝ × 2.05˝ × 11.85˝ 18.80˝ × 2.05˝ × 11.85˝
Designed, engineered and made in the U.S.A.
8
PA5422 PA4212
4/3/2 Channel Power Amplifier 2/1 Channel Power Amplifier
with ChannelFlex Crossover with ChannelFlex Crossover plus Subsonic Filter
Specifications
PA5422 PA4212
13.8V POWER SUPPLY
Max. Power Output 200W × 4ch (2Ω) 310W × 2ch (2Ω)
2Ω 120W × 4ch 200W × 2ch
Power Output 4Ω 85W × 4ch 130W × 2ch
4Ω bridged 240W × 2ch 400W × 1ch
THD @ Rated Power @ 2Ω stereo 0.008% 0.008%
@ 4Ω stereo 0.004% 0.004%
@ 4Ω bridged 0.008% 0.008%
Signal to Noise 105dB 105dB
Freq. Response +0, –0.7 +0, –0.7
Crosstalk –75dB –75dB
Slew Rate 10Vµs 10Vµs
Damping Factor @ 60Hz >200 >200
Input Sensitivity 0.2 ~ 8V 0.2 ~ 8V
Max. Current Consumption (4Ω) 60 amps 50 amps
CHANNELFLEX CROSSOVER
Amp Crossover High Pass 12dB/octave 50 ~ 200Hz (Front) —
120Hz (Rear)
Low Pass 12dB/octave 50 ~ 200Hz 50 ~ 200Hz
Pre-Out Crossover High Pass 12dB/octave — —
Low Pass 12dB/octave — —
Subsonic Filter Freq. Range N/A 20Hz (Fix)
12dB/octave
Slope — 24dB/octave
(Switchable)
Dimensions (W × H × D) 13.32˝ × 2.05˝ × 11.85˝ 11.32˝ × 2.05˝ × 11.85˝
Designed, engineered and made in the U.S.A.
9
Integrated Amplifier Series
0 0 0 0
–6 –6 –6 –6
–12 –12 –12 –12
20 45 50 120 200 1k 10k 20k 20 45 50 120 200 1k 10k 20k 20 45 50 90 1k 10k 20k 20 45 50 120 200 1k 10k 20k
The Integrated Amplifier Series from • High-current, high-speed output devices • Epoxy composite PCB
ECLIPSE represent the highest value in their
class. Keeping our reputation for the • Audiophile-grade component selection • High-level input (Add-on capability)
tradition of delivering the best audio quality • Bass boost • Subwoofer input and output (EA3532)
in mobile audio, we have developed the new EA2212: 45Hz, 9dB ON/OFF
amplifiers to maximize your listening EA3422: 45Hz, 0 ~ 9dB (variable)
pleasure. ECLIPSE also offers the best (F/R separate)
warranty in the business, a responsibility
consistent with our serious commitment to • ChannelFlex crossover
build quality amplifiers that deliver superior EA2212:
performance year after year of demanding Low-pass (50 ~ 200Hz) variable
use. EA3422:
Low-pass (90Hz) fixed
• High-efficiency, high-energy MOSFET High-pass (50 ~ 200Hz)
power supply L/R independent
• Easily drives low impedance 2Ω loads EA3532:
Low-pass (50 ~ 200Hz) variable
• Intelligent 7-way discrete protection High-pass (50 ~ 200Hz) variable [front]
circuitry High-pass (120Hz) fixed [rear]
• Noise reduction with low distortion and
ultra-low negative feedback
10
BP1502
Premium Amplifier Bridge
BASS BOOST
+9 ON/OFF
0
–6
–12
1911
20 45 50 120 200 1k 10k 20k
Integrated Amplifier Bridge
Specifications
EA3532 EA3422 EA2212
13.8V POWER SUPPLY
Max. Power Output 105W × 4ch (2Ω)
230W × 1ch (Subwoofer) 123W × 4ch (2Ω) 105W × 2ch (2Ω)
2Ω 60W × 2ch (Front), 60W × 2ch (Rear)
120W × 1ch, 4Ω (Subwoofer) 70W × 4ch 70W × 2ch