Professional Documents
Culture Documents
Todd Nelson
Design Manager
Signal Chain
Modules
tnelson@linear.com
2
• Macrocell Towers
• Smaller – Lower Property Rental Costs
• Lower Power – Lower Electricity Costs
• Remote Radio Heads
OVDD
0.5V to 3.6V
I
ADC
0
LNA CLKOUT
ADC CLK
MUX
90 OF
ADC
Q
OGND
Offset Adjust
LO GND
LTM9004–AA
• Key Parameters:
• RF input @ -1dBFS: -7.2 dBm @ 1950 MHz
• Gain flatness: 0.15 dB
(DC to 1.92 MHz)
• Group delay flatness: 10 nsec
(DC to 1.92 MHz)
• Channel imbalance: 0.15 dB
• Channel quadrature error: 0.6˚
• Passband noise floor: -148.4dBm/Hz
• IIP2, 2 tone: +50dBm
• IIP3, 2 tone: +21.7dBm
• ACPR, 1 ch WCDMA: -62.5dBc
(@ -1dBFS )
• AltCPR, 1 ch WCDMA: -73.5dBc
(@ -1dBFS)
• Nearly Identical Numbers for –AB, –AC, –AD
LTM9004 Options
-5 dB AB version
AC version
-10 dB AD version
-15 dB
-20 dB
-25 dB
-30 dB
-35 dB
-40 dB
0.1 1 10 100 1000
IF Frequency
RF ADC
Input
SAW
LO Gain ADC
Input Control CLK
LTM9005–AA
• Key Parameters:
• RF input @ -1dBFS: -19dBm @ 1950 MHz
• Gain flatness: 0.5 dB
(over 14 MHz)
• 1 dB bandwidth: 15 MHz
• Passband noise floor: -158.5 dBm/Hz
• 2RF x 2LO product: -70 dBc
(@ -19 dBm)
• 3RF x 3LO product: -93 dBc
(@ -19 dBm)
LTM9005–AB
• Key Parameters:
• RF input @ -1dBFS: -19dBm @ 1.95GHz
• Gain flatness: 0.5 dB
(over 20 MHz)
• 1 dB bandwidth: 20 MHz
• Passband noise floor: -158.5 dBm/Hz
• 2RF x 2LO product: -70 dBc
(@ -19 dBm)
• 3RF x 3LO product: -93 dBc
(@ -19 dBm)