KinEmote provides a dynamic video overlay that shows you what the Kinect camera is seeing. To start a tracking session make a quick front-back motion toward the Kinect controller. The back motion will set the 'zero-point' of the mid plane. Practice finding a comfortable spot for your mid plane as that is where you are going to be doing most of your movements.
KinEmote provides a dynamic video overlay that shows you what the Kinect camera is seeing. To start a tracking session make a quick front-back motion toward the Kinect controller. The back motion will set the 'zero-point' of the mid plane. Practice finding a comfortable spot for your mid plane as that is where you are going to be doing most of your movements.
KinEmote provides a dynamic video overlay that shows you what the Kinect camera is seeing. To start a tracking session make a quick front-back motion toward the Kinect controller. The back motion will set the 'zero-point' of the mid plane. Practice finding a comfortable spot for your mid plane as that is where you are going to be doing most of your movements.
1. D ownload the required packages from the KinEmote web site: http://code.google.com/p/kinemote/ To initiate a tracking session make a quick front-back motion toward the Kinect controller. The back motion 2. Install the software in this order: will set the ‘zero-point’ of the Mid Plane. a). OpenNI Framework b). Sensor driver c). NITE Middleware using the following key: 0KOIk2JeIBYClPWVnMoRKn5cdY4=
3. Run the KinEmote Software.
4. E nter the IP address or Hostname of the computer running XBMC or Boxee. If you are running XBMC/Boxee on the same computer as the Kinect controller just use ‘localhost’
5. Choose XBMC, Boxee or Custom Keys
6. Click connect to start the KinEmote server.
Practice finding a comfortable spot for your mid plane
Video Overlay as that is where you are going to be doing most of your movements. KinEmote provides a dynamic video overlay that shows you what the Kinect camera is seeing. You can choose to enable/disable The back plane lies about 8 inches behind the mid this in the Video drop down menu. plane. Remember to stop a tracking session pull to the back plane and move your hand down. Show Visual Feed - Show video feedback window Autostart Visual Feed - S hows the video whenever a tracking session is active and hides it when a ses- sion drops.
To keep the video window on top of all other windows, right-click