You are on page 1of 4
OW isms ve Wrert [ooige toile ti Loudspeaker System Bose’ 301” Series II Di f S : i) Bose’ 301" Series Il Direct/Reflecting’ pes System 1. Introduction ‘Thank-you for purchasing the Bose 301 Series IIDiect/ Reflecting® Loudspeaker System: Its advanced design and ‘quality construction wil give you many years oflistening pleasure. ‘The installation and operating principles of your 301 system ate significantly cfferent from those of conventional specker systems, To obtain the best possible performance, please ‘take the time to read this manual. 2. Unpacking The shipping carton contains two 301 speakers labeled Part 1 (lefl) and Part2 (right). Unpack each unit caretully, saving the carton and all packaging materials for laler use. ifeither speakerappearsto be damaged when unpacking, donot operate the damaged unit. Fiepack both speakers in theiroriginal carton and notify your authorized Bose dealer immediately 3. Placement The following placement guidelines withelp you to realize the best possible performance fromyour 301 Laudspeakers, Refer to FIGURE 1 201 speakers work est when muisie is given space to dovelop “around’ the cabinels, reflecting off nearby walls, tocieale aide, transparentstereo mage Hard materials such 2s wood, brick, glass, sheelrock and/or sturdy pan- ling generally provide the most effective sound-reflecting surfaces. Sound-absorbent lumishings (heavy drapes, ete.) should be kept away from the immeciete vicinity of the speakers b. Place the Part and Part 2sneakerson the left and right sides of the room respectively, spaced 4-12 feet (1 2-3 6m) apart. Vertical placement (with the tweetets facing directly Upward or downward) is not recommended, A CEILING yom 134001 (0—90cm) Minimum 18 inches (45cm) BACK WALL ‘

You might also like