You are on page 1of 4

1.- A sensitive dc meter takes 9 mA from a line when the voltage is 108 V.

What is the
resistance of the meter?

2.- A 12 Ω resistor in a power supply circuit carries 0.5 A. How many watts of power
are dissipated in the resistor? What must be the wattage rating of the resistor in
order to dissipate this power safely as heat?

3.- Find the power used by a 10 kΩ resistor drawing 0.01 A.

4.- In Fig., a 12-V battery supplies a current of 2 A. If R2 = 2 R, find RI and VI.


5.- Find I, V1, V2, P2, and R2 in the circuit shown (Fig.).

6 What is the resistance of 500ft of No.


6.- No 20 copper wire?

7.- What is the resistance of 1000ft of No. 23 copper wire?

8.- A parallel circuit consists of a coffee maker, a toaster, and a frying pan
plugged into a kitchen appliance circuit on a 120-V line (Fig.). What currents
will flow in each branch of the circuit and what is the total current drawn by
y all
the appliances?
9.- Find all mesh currents and voltage drops for the two-mesh circuit shown in Fig.

10.- For a two-delta bridge circuit (Fig.), find the values of current through all the resistors.
11.- Find the total resistance of the circuit (Fig.)

12.- In the Wheatstone bridge circuit (Fig. 8-37), the bridge is balanced.
Calculate Rx,
Rx Ix
Ix, II,, and each voltage
voltage.

You might also like