Professional Documents
Culture Documents
Block Diagram
Block Diagram
POWER SUPPLY
- The power supply circuit use a transformer to change the input voltage to a suitable
voltage value
HEAT TEMPERATURE
- This circuit is use for detect the moving value for sent to microcontroller
WATER DETECTER
DARK ON RELAY
- The circuit depends on a light sensitive device called a LDR,light dependent resistoris
used to apply bias to a transisror.
- The resistant of the LDR depend on the amount of light falling on it.
- The more dark the higher the LDR resistance. As the LDR changes resistance the change
in potential is detected by the circuit and the relay is active.
MICROCONTROLLER
BUZZER
LCD DISPLAY
LED
o This project is use three type of detector, the type is head temperature,dark on
relay andwater detecter. The three of this circuit operate with good the
information will be display on the LCD and the LED will on. Each circuit will be
place LED to know the status of the circuit operation and programmed to display
the information. The very important part in this project is we called
microcontroller. We use AT89C52 to control all the combination all the circuit to
display information that have been programmed and we use three type of LED
colour to easy know that the circuit is operation with clear. LED DISPLAY also
will show out different statement for each circuit. It will be showed for example
“overflow” when the water detector circuit run, “high temp” when the heat
temperature relay on and “lamp on” will be display if the dark on relay run.