The document describes a team's plan to build a wired robot for a tug of war competition. The robot will use two geared motors controlled remotely by wires to provide speed and accuracy. It will weigh 1kg and use gears to pull and power, along with sideways wheels to create friction and make the robot harder to pull. The team's name is Techunix from Mody Institute of Technology and Science, and the contact is Manjot Kaur.
The document describes a team's plan to build a wired robot for a tug of war competition. The robot will use two geared motors controlled remotely by wires to provide speed and accuracy. It will weigh 1kg and use gears to pull and power, along with sideways wheels to create friction and make the robot harder to pull. The team's name is Techunix from Mody Institute of Technology and Science, and the contact is Manjot Kaur.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
The document describes a team's plan to build a wired robot for a tug of war competition. The robot will use two geared motors controlled remotely by wires to provide speed and accuracy. It will weigh 1kg and use gears to pull and power, along with sideways wheels to create friction and make the robot harder to pull. The team's name is Techunix from Mody Institute of Technology and Science, and the contact is Manjot Kaur.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
Team Name: Techunix College: Mody Institute Of technology And Science Email ID of team member:kaurmanjot2@gmail.com Names of all the team members: Neeru Singh,Manjot Kaur
A Detailed Report Describing the Logic Used In Model
Idea & Design:
We are planning to make a wired robot for tug of war. The Following points brief out our model: 1. It will be motor based, 2-geared motor robot -> to provide good speed. 2. It will be wired remote controlled robot -> for better accuracy 3. to achieve the target we need pull and power, friction. Weight being fixed to 1Kg, we might be using gears for pull and power, Also we may put the wheels sideways which will create friction, making the robot harder to pull.