MAKE YOUR OWN A380
Some tips for a better flight
Yu may get better resis by adjusting slightly the wings and the tal
7.Cut out the plan's fuselage and tll Hold the plane behind the wings, and throw ithorzontaly.
careful folowing the outer
back lines. Also eut out the sits
that are located on te rear
land onthe sides ofthe fuselage
(they appear as thick black lines).
2Fold the plane's fuselag
‘al aiong the central cated ine
FE
‘8.First fold down the tall along the central dotted line
‘then fold it up along the dotted lines ofthe sides.
‘The plane wil fly further if you place a paperclip on its nose,
<4.W\hile fattening it with your thumb and forefinger,
Insert the plane's tail genlly al a 45° angle
in the corresponding sis that you previously cut out
inthe fuselage.
‘Then pul it firmly upwards and backwards
(CUT THE SLITS FOR THE TALL
Fold up the), and @ parson hemseives
Make sure ney aren between the forward fseage
sides so that te primed areas sil show,
insert part @) in he coresponcng sit
The planes tselage is now fat
Careful
Do nat throw
the plane in direction
Te” auc
t
4
,
6.Straighten the wings and the tai's horizontal sides.
Fold the engines dowm vertically and fold
the tips of the wings upwards,
PTI