Professional Documents
Culture Documents
Take Assessment - Module 2 Exam - CCNP: Building Multilayer Switched Networks (Version 5.0)
Take Assessment - Module 2 Exam - CCNP: Building Multilayer Switched Networks (Version 5.0)
0)
1 Which two statements are true about VLAN design using the Enterprise Composite Model model? (Choose two.)
Local VLANs used with DHCP allow workstations to be mo ved from one network segment to another with little administrative
overhead.
Local VLANs that are limited to the local access and distribution layers allow Layer 2 and Layer 3 redundancy protocols to wo rk
together with greater ease.
End-to-end VLANs allow the simplest integration between Layer 2 and Layer 3 redundancy protocols.
End-to-end VLANs allow for more optimal traffic patterns in a typical network with an 80/20 remote/local traffic pattern.
2 Which two items are benefits of implementing local VLANs within the Enterprise Composite Model? (Choose two.)
A single VLAN can extend further than its associated distribution-layer switch.
3 Which statement is true regarding best -practice design of local VLANs using the Enterprise Composite Network model?
Local VLAN is a feature that has only local significance to the switch.
A local VLAN does not extend beyond the Building Distribution submodule.
Local VLANs should be created based upon the job function of the end user.
Refer to the exhibit. Hosts on VLAN 10 must be able to communicate with hosts on VLAN 20. Given the topology in the exhibit, which
statement is correct?
Routing between VLANs should be configured at the access layer.
Routing between VLANs is not possible without a router; therefore, hosts will not be able to communicate.
5 Which two VLAN Trunking Protocol (VTP) statements are true? (Choose two.)
A switch may belong to several VTP domains.
VTP updates are exchanged only with other switches in the same VTP domain.
VTP updates include VLAN number, name, description, and assigned ports.
Refer to the exhibit. What is the problem between the connection on Switch1 and Switch2?
encapsulation mismatch
MTU mismatch
VTP mismatch
DTP mismatch
It is a Cisco proprietary protocol that inserts a tag into the original Ethernet header.
It supports multiple Layer 2 protocols (Ethernet, Token Ring, FDDI and ATM).
The encapsulation process leaves original frames unmodified and is less prone to error and more secure.
The native VLAN interface configurations must match at both ends of the link or the trunk may not form.
Refer to the exhibit. What is the problem between the connection on Switch1 and Switch2?
native VLAN mismatch
encapsulation mismatch
VTP mismatch
DTP mismatch
hardware failure
10 Which three statements regarding the use of VTP within the Campus Infrastructure module are true? (Choose three.)
In high-availability environments, it is best practice to set all switches to ignore VTP updates.
In the default VTP mode, a switch can create, modify, and delete VLANs at the command line interface (CLI).
There are three VTP versions that support different features, of which VTP version 3 is the most prevalent.
VTP-enabled switches can exchange three types of advertisements: summary routes, subnet advertisements, and advertisement
requests from transparent bridges.
VTP keeps VLAN information consistent between Building Core and Building Distribution switches.
11
Refer to the exhibit. A network administrator is unable to ping between two workstations, PC1 and PC2, connected to switch354 8. PC1
is connected to port Fa0/19, and PC2 is connected to port Gi0/2. Given the output of the show vlan command, which statement is true?
Both workstations are on the same VLAN.
12
Refer to the exhibit. Which configuration will enable trunking on the SW2 switch?
SW2(config-if)# switchport trunk encapsulation dot1q
SW2(config-if)# switchport mode trunk
SW2(config-if)# switchport trunk encapsulation isl
SW2(config-if)# switchport mode trunk
SW2(config-if)# switchport trunk encapsulation dot1q
SW2(config-if)# switchport mode access
SW2(config-if)# switchport trunk encapsulation isl
SW2(config-if)# switchport mode access
The switch will hold the untagged frame and send a BPDU to the originating switch.
The switch will associate the frame with the VLAN that the receiving port is assigned to.
14
Refer to the exhibit. Switch2 is not updating its VLAN information based on updates from Switch1. Why is this occurring?
The VTP domains are different.
VLAN IDs are added before a frame exits a port configured as a trunk.
VLAN IDs help the switch determine which ports will be pruned from particular VLANs.
16
Refer to the exhibit. Which two statements are true about the switch CAT2? (Choose two.)
Eleven VLANs were manually configured on the switch.
Six VLANs were manually configured on the switch.
17
Refer to the exhibit. Which statement is true if the two switches were connected with their default settings?
DTP frames will be exchanged between SW1 and SW2.
STP is disabled.
18 What are three benefits of local VLANs in the Enterprise Composite Network model? (Choose three.)
Users can be grouped on a common IP segment even though they are geographically dispersed.
Problem isolation and resolution are expedited within the swi tch block.
Traffic is switched rather than routed as it passes from the distribution layer into the core.
19
Refer to the exhibit. Both switches have maintained their default configurations. Given the output of the show interface fastethernet 0/2
switchport command, which mode should be displayed after the "Negotiation of Trunking: " field?
on
off
auto
desirable