Operating
Ingtructions ;
Impact Dot Matrix Printer
RootFOR USE IN U.K.
IMPORTANT:
The wires in the main leads are coloured in accordance with the following:
code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the main lead of this apparatus may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The wire which is coloured green and yellow must be connected to|
the terminal in the plug which is marked by the letter E or by the|
safety earth symbol + or coloured green or green-and yellow.
eThe wire which is coloured blue must be connected to the. terminal]
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
WARNING: This apparatus must be earthed.
eThis equipment is produced to BS800: 1977.
Any details given in these Operating Instructions are subject to change
without notice.WARNING
Power source voltage of this unit is listed on the nameplate. Do not
fail-to plug into the right voltage.
@To prevent fire or shock hazard, do not expose this product to rain
or any type of moisture.
The serial number of the unit may be found on the label on the rear
of the unit.
For your convenience, note this number below, and retain this book,
along with your proof of purchase, to serve as a permanent record of
your purchase in the event of a theft, or for future reference.
MODEL NO. _KX-P1180__- NAME OF DEALER
SERIAL NO. DATE OF PURCHASE
Microsoft is a registered trademark of Microsoft Corporation.
IBM and IBM-PC ;are registered trademarks of International Business
Machines Corporation.
IBM Proprinter Ir and IBM NLQ II are trademarks of International Busi-
ness Machines Corporation.
Apple is a registered trademark of Apple Computer, Inc.
FX-86e/FX-800 is a trademark of Seiko Epson Corporation: