Professional Documents
Culture Documents
6211
6211
6211-I3-xxx
Destination or Source IP The Zhone 6200 ADSL2+ endpoints are easily user-installed. The
Address and MAC
embedded web-based user interface is designed to simplify ADSL
Addresses
deployment. All products provide an Ethernet connection that is
✓ Traffic Class Rules based auto-sensing, eliminating the worry about connection cable type
on Protocol, Source IP, (straight-through vs crossover).
Source Port, Destination
IP, Destination Port, DELT or Dual End Loop Test, is a feature that is present the 6200 Family
802.1p of ADSL2+ CPEs. DELT is primarily used for reactive tests on a loop after
a modem has been deployed—either to help troubleshoot a line or to
✓ Single Click DSL test - Tests capture a baseline of loop characteristics at the time of installation.
Ethernet connection and Because DELT is a dual-ended test, it requires equipment that supports
ADSL Synchronization
the DELT feature at both ends of the copper loop. While this prevents
along with ATM OAM F5
DELT from being used on loops where no CPE has yet been deployed,
segment pings and
end-to-end pings. DELT in turn offers a deeper set of loop tests, and can provide very
valuable information on the condition of a copper loop.
✓ Configured through
Default settings make for a quick and easy installation that doesn't
easy-to-use web interface
require any configuration.
✓ DELT - Integrated Loop
The modem, when operating in router mode, support DHCP
Testing for Line
troubleshooting Server/Relay/Client, NAPT, as well as RIP, dynamic routing, port
forwarding, and static routing. For security, firewall functions including
PAP/CHAP authentication and IP filtering are supported.
1133131 13
ADSL2+ Single Port Modem
Technical Specifications
Dimensions Standards Support Protocol Support
■ 1.2"(3.0cm) high x 6"(15.2cm) wide x ■ ATM Support ■ ANSI T1.413 (Full Rate ADSL)
4.4"(11.8cm) deep - ITU-T I.610 F4/F5 OAM Send and ■ ITU G.992.1 (DMT)
Receieve/Loop back ■ ITU G.992.2 (G.lite)
Weight
- Support for 8 PVC's ■ ITU G.992.3 (ADSL2)
■ 1.5lbs (0.7kg) - RFC 1483/2684 (Bridged/Routed Ethernet ■ ITU G.992.5 (ADSL2+)
over ■ ITU G.994.1 (G.hs)
Power ATM) ■ ITU G.997.1
■ Routing/Bridge Support ■ Annex L
■ 100 VAC, 50Hz
- Transparent Bridge Support ■ Annex M
■ 110 VAC, 60Hz
- DHCP Server/Relay/Client
■ 220 VAC, 50/60Hz Management
- DNS Relay Agent
Interfaces - Dynamic DNS Support ■ Web-based Configuration GUI
- DMZ support ■ CLI
■ DSL Line: RJ11
- Static Routing ■ Telnet Remote Management
■ Ethernet: 10/100BaseT
- RIPv1 and RIPv2 ■ FTP/TFTP firmware upgrade and
■ USB 1.1
- Policy based QoS (TOS, 802.1p, configuration backup/restore
■ Integrated Phone Filter
Source/Destination IP Address, ■ Syslog Support
Source/Destination Port, Protocol) ■ TR-069 Support
■ PPP Support
- PAP/CHAP authentication Regulatory Compliance
- PPPoA
■ FCC Part 15, Part 68
- PPPoE
■ CE
■ Security
■ UL
- NAT for Basic Firewall support
■ TUV
- Ingress and Egress Packet Filtering
■ RoHS compliant
- Parental Control
- MAC Filtering Operating Requirements
- Stateful Packet Inspection
■ Operating Temperature: 32F to 104F (0C to
■ DELT support
40C)
■ TR-069 Support
■ Storage Temperature: -4F to 149F (-20C to 65C)
■ SNMP Support
■ Humidity: 5% to 95%, non-condensing
Ordering Information