You are on page 1of 1

T1 S2

Router1 fa0/0 192.168.7.126 255.255.255.128

fa0/1 192.168.7.190 255.255.255.192

Host A 192.168.7.1 255.255.255.128

Host B 192.168.7.129 255.255.255.192

T5 S2

Yes I was prompted for the secret password.

T6

Console is used for initial/local connections telnet is for remote connections. You would want different
passwords because it would be more secure.

The switch is operating on layer2 no layer3 therefore it does not need an IP address it uses MAC
addresses.

You might also like