Professional Documents
Culture Documents
Gundam Model Kit Seamline Removal Tutorial
Gundam Model Kit Seamline Removal Tutorial
It’s been a while since I make some Gundam model kit tutorial, now while I have free time
please enjoy Gundam Model Kit Seamline Removal Tutorial! ^^;
You will need Hobby Cement to remove seamline, I use Tamiya brand but you could use
other brands too and…
First, prepare your part and hold it using a tools you comfortable with, I usually use alligator
clips on one parts.
Then take an amount of Tamiya Cement
*NOTE: BE CAREFUL NOT TO TOUCH THE CEMENT OR YOU WILL HAVE A BIG
MESSY TROUBLE.
Then clip it using any tools you have and LEAVE IT FOR A DAY, yes a day. Or 12 hours
minimal if you’re not a patient person like me :p
After the cement is dry (24 hours later) you will see something like this.
First, sand with 400 and then continue with 1000/1500 to get a smooth result.
For special case like this, you will need plastic scribber, I use Hasegawa plastic scribber.
To give back the detailing loss because of sanding process (You dont need to do this if you
sand a smooth non detailed parts)
final look before painting would be like this, of course you could do better than me now ^^;
The next step would be painting this part either using spray can or Airbrush.
and voila! the end result would be like this after priming and before painting.