2. Next 3. Director – HND1A 4. Next 5. NO 6. Next 7. Family – cyclone – first one 8. Next 9. Finish File New Block diagram/schematic Ok 1. Blue for full screen 2. Choose components (full 74 series) 3. Ok 4. Place components 5. Primitive options are available 6. Inputs and output have to be connected to pins 7. Choose which are the inputs and which are the outputs 8. A box has to appear in order to make sure that the connection is ok 9. An X marks a wrong connection 10. Choose the pin name to which it needs to be connected to (pin name – A,B,C,D,E) 11. For 5V, it is a component (VCC/Ground) 12. For clock choose an input 13. For inputs do the same procedure for the output 14. Exit from every screen and save (counter)/ save in the same directory where the project is saved 15. Add file to current project 16. Save 17. Compile 18. Right click 19. Start Tools Net list RTL Viewer (register transfer level) VCC or Ground may be eliminated in the following schematic Print the schematic (file, print) 1. Compilation report (lists resources that uses from IC) 2. Print report (file, print) 3. Analysis Synthesis Usage Report Summary