Professional Documents
Culture Documents
Installation Manual of Vmu
Installation Manual of Vmu
INSTALLATION MANUAL FOR REFURBISHED AND NEW VMU
VMUs will be having Active SIM cards and loading with new F/W and VMU ID is also set. So only
physical installation is required.
A) Mounting of Combo antenna. Combo Antenna houses both GPS and GSM antenna within same
box. The Combo antenna is covered with a separate dome cover for additional protection.
B) Screw mounting with double NUTs to prevent loosening of screw due to vibration.
C) The Antenna cable should not be exposed outside the cabin.
D) You have to make 3 holes – 2 for box mounting and one for pulling cable within the cabin.
COMBO ANTENNA
NO ANTENNA CABLE IS VISIBLE. CABLE
HAS DIRECTLY ENETERED INTO CABLE.
4 Holes to
be done
for VMU
mounting.
DOUBLE
BOLTS
BACK SIDE OF THE OPERATOR CABIN
HOLE FOR
ANTENNA
CABLE
COMBO
ANTENNA
MOUNTED
USING NUT
BOLTS
VISIBLE
SWITCH
MOUNTED
USING
CLAMP
CABLE IS
CLAMPED
USING CLIP.
CABLE
SHOULD
NOT HANG.
USE CABLE TIE FOR EXCESS CABLE
BUNDLING TOGETHER
USE AMALGAMATING TAPE FOR THE EXPOSED
POWER CABLE (EXPOSED PORTION OF THE
CABLE SEEN AS RED WILL BE COVERED USING
AMALGAMATING TAPE