Professional Documents
Culture Documents
R
1. Before beginning lamp assembly, carefully unpack all items
6 CORPORATE PARKWAY
GOOSE CREEK, SC. 29445 referring to illustration for parts identification.
2. Place the lamp BASE on a level surface. Locate the STEM with
KNURL NUT, CHECK RING and SPACER. Place the bottom of
the SPACER into the CHECK RING on top of SOCKET
CAP
CLUSTER. Place the CHECK RING on top of the SPACER.
Pass the bottom end of STEM with KNURL NUT through the
center hole of CHECK RING and thread into the COUPLING.
3. Locate the CAST RING and thread onto the end of the STEM
SHADE as shown (stepped side facing upward). Hand tighten ring until
snug against KNURL NUT.
FIGURE 1
FINIAL
CAP
SHADE
IS-TF7995R
11-2005