ASSAB 709M Assn ha
MSTEELS... A new concept in machinery steels,
ASSAB Msteels are machinery steels with unique machin.
“abilty. Mey are made by a special meting technique which
‘makes Itpossibie to inoreaso the cuting speed by up 10.20%
Grextend the oo! Ife up to four times.
NEAREST STANDARDS atigue strength diagram aco
estan mas amon sess Goosmen any ara?
CHEMICAL COMPOSITION m=” fa
PROPERTIES AND APPLICATIONS 2
‘ASSAB 709M isan alloyed machinery stel with
bigh strength in small and medium sts.
{As standard ASSAB 709M fs supplied tough
harened requiring no further heat treatment.
ean be oll hardened to higher mechanical
properties,
ASSAB 708M Is suitable for flame and induction
hardening. Itcan also be nitrided or utrided to
2 surface haraness of 600-650 Vickers,
ASSAB 709M I pot suitable fr welding but can
set ctain pals bs rep we. — ‘eam
“Typical application include shafts and other im
power tanamission components aswel a3 high o
Strength bots
SIZE RANGE 2a
[ASSAB 700M is available as standaré in sizes
16—210mm diameter, unmachined,
5
MECHANICAL PROPERTIES: | a
AS SUPPLIED a
tn aa
Tenaleceng ey 920-0? G20 Wr?
‘The mechanical properties are guaranteed for
8228 up fo and including 210 mm dlametor.CUTTING DATA
“Turning wth coated carbide tools PIS Dring with high speed steel crits
ROUGH TURNING
mr
a0
0.
FINE TURNING
Te aed etrminedon the basi of rtrence
‘dus nose roan deavedauece tip
“aie
Feed re
ae_G10- O19 O76
16 00 025-002
Feud, mn Ouing sped
—
—
— i
CORRECTION COEFFICIENTS
aE
Ea
Se
~~
Sree na on
rpc eae
Teenncergoorconston
Cutting lubrication, emulsion
rr
Dian Feed Fass Feed Power Dallng Oring
én
‘one speed ‘cor
&
=
20 in 3
=
= =
= 5
conrcnon coerce
=
‘peed fond
ang eas
— ea. 2 2
Sra —
Sache pacers
Sono
= pea
sae”
The values i the above tables are app
able for ASSAB 708M, Ir sizes up to
| 01mm aia. ough hardened to
— | 275-"Se0 HB. Values for neaver sizes
‘ough hardened to 245-260 HB) can
‘be taken from the fables hour brochure,
‘MSTEELS, machining.
7-08Hardenabilty diagram
en 1
Soft annealing at 680—720°C
Soak at tomporature for 2hours. Cool with ur
race at @ maximum rate of 15°C per hour down
To 600C, and then fool nae
‘Stress reliving at 450—650°C
‘Tough hardened stool should be heated to
approx, 60°C below the temperature at which
{empering was caried out fas standard ASSAB
08M supplied tempered at 600°C and should,
thus, be strae reloved at 550°C) Soak for
‘12="2hour ater he material has reached {ul
{emperature, Coal with furnace down t0 480°C,
‘and then feo) in at.
Effect of tempering temperature
‘on the mechanical properties
HEAT TREATMENT
Hardening at 830—850°C with quenching in ol,
‘Soaking ie In minutes when the surface hs
attained fll temperature, 0.7» thickness in|
‘mm. Interupt the quenching at 12°C and
temper immediatly aftenvards.
Flame or Induction hardening at #80 —900°C
After heating the surface, quench immediately
in water or 1. Quenching n water for paris of
simple design. O quenching fr more compl
‘cated design. The hardness, approx. 5582
HAG, Is dependent on factors suchas workpiece
‘Sze and quenching procedure. After hardening,
Tempering to requited eurface harcnoss.
“Tempering at 500—700"C
Soaking time should be 1—2hours after the
‘workplace has attained fulltemperalwe
throughout,
Tempering diagram