aste@astecombr AGM-12864K-803-T _tesouty eens
1.0 DIMENSIONAL DRAWING
Joe 128X654] DOTS poe
core ce rw
[Power L$. | wooy+s.0
=<—— - co Pare 28x84 ts soouon [-
5 ight top Pf | vmoen
| MODULE vera
————————— =
3.0 MECHANICAL SPECIFICATIONS & FEATURE
ns FEATURE
tem Nominal dimensions (mm) rae ow
Module Size (WHT) ‘53.0 70.0 x 15.5 MAX LCD Colour Blue
‘View Area (WH) 707x388 View Angle O'clock
Dot x Dots (WH) 128 x 64 Display Type Negative Type
Dot Pitch (W"A) 0,52 x0.52 Rear polarizer “Transmissive
Dot Size (W'H) 0.48 x.0.48 ‘Operating Temperature =20°C = 70°C.
‘Storage Temperature 30°C = 80°C.
Backlight White Side LED
4,0 ELECTRICAL CHARACTERISTICS
Tem ‘Symbol Test Condition Te. Unit
‘Operating Voltage Vad 5.0 Vv
‘Operating Voltage Tor LCD Vied = S Vv
‘Supply Current 1d, = 2 mA
‘Supply Current for Backlight if = 750 = mA
5.0 INTERFACE PIN CONNECTIONS
Pin No ‘Symbol Level Description’
4 ‘VSS = Ground for logic
2z VDD. = Power supply for Logic(+5.0V)
3 Vo Power supply for LCD drive
a RS Register selection (F:Data registor, L:instruction registor)
5 RW. Readiwrte selection (H:Read, L:Write)
6 E Enable signal for LCM
Ta DB0-DB7 Data Bus line
15 ICSI hip Select Signal Tor Let Half of the screen
16 1682 Chip Select Signal for Right Half of the screen
17 TRST Rest Signal
18 VEE Negtive Voltage Output
19 LEDA Power supply for Blacklight (+)
20 LEDK Power supply for Blacklight ()