Manage Tab >> Project Units. To set Project Unit to meters
Double click elevation view to add level and edit elevation Click Grid to add cross section view and add another in each grid by type distance Double click level1 under structural plan to open plan view Click Grid to add another grid and add another in each grid by type distance Click Isolated foundation under Home Tab to add foundation on grid line Click cross grid line to insert foundation Click on foundation item to modify or click edit family to edit existing family Select another family by select from list Click instance properties to modify each item properties Click type properties to modify family properties Edit family shape and load into project Click duplicate to add another type of family Edit Type properties by change dimension of type Select or create another type for edit each family type Edit instance properties each item for level, offset, footing material and etc. Click Column and select structural column to add column Select column family and click on grid to add column Edit Instance properties and Type properties to change property of column Click Beam under home tab to add beam Select beam family and drag along beam direction Edit Instance properties and Type properties to change property of beam Click Floor under Home Tab and select structural floor to add slab Select rectangular or line to draw boundary of slab Draw slab boundary by drag along grid line and click finish Click Wall under Home Tab and select structural wall to add wall Select rectangular or line to draw wall Click Stairs under Home Tab and select run or boundary to add stairs Select run to create direction up and down of stair (this picture) Select boundary to draw side boundary of stair Click finish to finish draw and add stair to project