We are having problems with the Hydraulic Side Cover on tractors / 5000 series, the maintaining valve was assembled in a wrong way and it is clapped into the cover.
Hydraulic Side Cover
It is assembled at the right hand side of the tractor.
The maintaining valve is
assembled at the rear end of the hydraulic side cover.
Hydraulic Side Cover
Maintaining valve
The maintaining valve was forced
into the side cover when it was assembled.
The maintaining valve is a slide
valve, if it does not work, the hose that goes to the hydraulic filter may crack. This is the effect shown in the tractors that were fit in this condition. 5 UNITS. Today we found 8 units with this condition, so we have 13 units that need to change the hydraulic side cover; Canoas sent 5 covers yesterday and is sending 8 more today. We expect to recover the unblued units at the end of this week, if the parts arrived on time.