Professional Documents
Culture Documents
User Guide To MapInfo Plus-In CellMaker
User Guide To MapInfo Plus-In CellMaker
CDMA Division
ZTE CORPORATION
1 / 13
1 Effect Drawing
The following is the site information effect drawing based on MapInfo made by the CellMaker
2 / 13
2 How to use it
2.1 Preparation First we need to make a site information file, and the format is as the following.
Then copy all the site information to a *.txt format file as the following:
3 / 13
After the preparation is done, double clicks on the shortcut of CellMaker, and it will automatically open MapInfo. And now we can see that the plus-in tool is already on the main menu of MapInfo as the name of Cellmaker.
4 / 13
Choosing the Delimited ASCII(*.txt) file format, and open the site file
5 / 13
After open the site file, choosing the Use First Line for Column in the pop-up Delimited ASCII Information window, the press OK
6 / 13
Table---->Create Points
In the Choose Projection window, choosing the correct projection mode, e.g. WGS84, press OK
7 / 13
File---->Close All
8 / 13
Choosing the .TAB site information file, which is converted from the .Txt file, and in the pop-up Sector Builder window select Sectorders, then press OK
9 / 13
The CellMaker can maximally support 6 sectors sites, but generally the sectors for each BTS site are not more than 3, so we are mainly focusing on the sector A, B and C , and for the Sector designator, we choose them from V1 to V3(sometimes it will be configured automatically )
10 / 13
For the sectors color, we can edit it according to our use manner.
11 / 13
12 / 13
13 / 13